GRN® 40x52/58x7.5 NBR – Wheel Hub Oil Seal
search
  • Rotary Shaft Seal 40x52/58x7.5 NBR AO TC Wheel Hub Oil Seal
  • Rotary Shaft Seal 40x52/58x7.5 NBR AO TC Wheel Hub Oil Seal
  • GRN® 40x52/58x7.5 NBR – Wheel Hub Oil Seal

GRN® 40x52/58x7.5 NBR – Wheel Hub Oil Seal

5903641611855
47794 pcs.
€0.28 (net)
Price for: 1pcs.

GRN® 40x52/58x7.5 NBR is a wheel hub oil seal manufactured from nitrile butadiene rubber. Nominal dimensions: 40 mm inside diameter, 52/58 mm outside dimensions and 7.5 mm width. Designed to reduce lubricant leakage and contamination ingress in compatible wheel hub assemblies. The dual outside diameter designation requires verification of the housing and seal profile geometry. Available through simmering.pl, a specialist B2B industrial supply platform, with worldwide shipping from stock in Poland.

Alternative product 40x52/58x7.5

Quantity

Technical Specifications

Parameter

Specification

Brand

GRN®

Product designation

40x52/58x7.5

Product type

Wheel hub oil seal

Sealing type

Radial shaft oil seal

Elastomer material

NBR – nitrile butadiene rubber

Inside diameter (d)

40 mm

Outside diameters in designation

52/58 mm

Nominal width (b)

7.5 mm

Nominal dimensions

40x52/58x7.5 mm

Intended application according to product designation

Wheel hub sealing

Construction and Operating Principle

The GRN® 40x52/58x7.5 NBR oil seal is designed to reduce lubricant leakage from a wheel hub assembly while helping protect its internal components against external contamination.

An important identification feature is the dual outside diameter designation of 52/58 mm. This indicates that two external dimensions must be considered during selection rather than treating the product as a standard cylindrical oil seal with a single outside diameter.

However, the designation alone does not establish whether the larger diameter corresponds to a flange, a structural projection or another profile feature. A technical drawing of the exact product version is required to confirm its geometry.

Sealing Function

Wheel hub sealing involves two main functions:

  • Reducing lubricant leakage from the lubricated assembly.

  • Limiting the ingress of dust, moisture and road contaminants into the mechanical components.

Sealing performance depends on the sealing lip design, mating surface condition, installation arrangement and operating conditions.

The product name alone does not confirm the number of sealing lips, the presence of a garter spring or a directional sealing profile.

NBR Material – Technical Properties

NBR is an elastomer widely used in sealing applications involving mineral oils and industrial lubricating greases.

Its relevant characteristics for wheel hub sealing include:

  • Good resistance to many mineral oil-based lubricating greases.

  • Elasticity suitable for contact with sealing surfaces.

  • Wear resistance dependent on the rubber compound and friction conditions.

NBR compatibility with a particular grease should be assessed according to its base oil, additives and operating temperature.

NBR does not automatically provide resistance to all chemicals, operating fluids or prolonged exposure to elevated temperatures.

Operating Conditions and Limitations

The following factors are particularly important in wheel hub sealing applications:

  • Temperature generated during wheel hub operation.

  • Type and consistency of the lubricant.

  • Rotational speed of the mating surface.

  • Radial and axial runout.

  • Condition of the sealing contact surface.

  • Exposure to water, mud and dust.

  • Correct installation of the oil seal.

Permissible operating speed, temperature and pressure cannot be determined solely from the NBR material and nominal dimensions.

A wheel hub oil seal should not be considered completely watertight without confirmation of its construction and relevant testing conditions.

Application – Wheel Hub Sealing

The product is identified as a wheel hub oil seal, a component designed to reduce lubricant loss and contamination ingress in a sealed wheel hub assembly.

It may be considered for mechanical wheel hub assemblies with compatible installation geometry and suitable operating conditions.

However, compatibility with a specific vehicle brand, axle, agricultural machine or trailer must not be assumed without a verified OEM reference or technical documentation.

Selection and Interchangeability

When selecting an equivalent oil seal, the complete designation 40x52/58x7.5 mm must be retained.

The following parameters should be verified:

  • Diameter of the mating surface.

  • Housing bore geometry.

  • Meaning of both outside diameters, 52/58 mm.

  • Installation width and seating depth.

  • Oil seal profile geometry.

  • Elastomer material.

  • Interaction with the wheel hub and adjacent components.

A 40x52x7.5 mm oil seal is not automatically interchangeable with a 40x52/58x7.5 mm version. Omitting the 58 mm dimension may result in selecting a component with a different external profile.

Even identical nominal dimensions do not guarantee complete interchangeability without comparing the construction profiles.

Installation and Operation

Before installation, inspect the housing bore and mating surface for cleanliness and damage. Scratches, corrosion, deformation and burrs may compromise sealing performance.

During installation:

  • Verify the correct orientation of the oil seal relative to the wheel hub.

  • Check that the 52/58 mm profile matches the housing geometry.

  • Protect sealing surfaces against mechanical damage.

  • Press the oil seal evenly into position using a suitable installation tool.

  • Avoid applying installation force to profile features not designed to withstand it.

  • Use lubrication appropriate for the wheel hub assembly.

Incorrect seating, sealing lip damage or unsuitable grease may cause premature wear and leakage.

FAQ – Frequently Asked Technical Questions

What does the dimension 40x52/58x7.5 mm mean?

The designation includes a 40 mm inside diameter, two outside dimensions of 52/58 mm and a width of 7.5 mm. The exact meaning of both outside diameters requires confirmation using the product drawing.

Can a 40x52/58x7.5 oil seal be replaced with a standard 40x52x7.5 version?

Not without checking the profile. The additional 58 mm dimension may represent an important construction feature.

Is the oil seal manufactured from NBR?

Yes. The elastomer specified in the product name is NBR, or nitrile butadiene rubber.

Is NBR suitable for bearing grease?

NBR is generally compatible with many mineral oil-based lubricating greases. Compatibility should be confirmed for the specific lubricant.

Does this oil seal fit every wheel hub with a 40 mm shaft?

No. In addition to the inside diameter, the housing geometry, seal profile and operating conditions must be compatible.

Does the product have a dust protection lip?

The product designation alone does not confirm the number of sealing lips. This requires examination of the exact construction profile.

Is the oil seal resistant to water and mud?

The level of protection against water and mud depends on the seal construction and installation arrangement. Complete watertightness cannot be claimed without appropriate technical data.

Can this oil seal be used in trailer or agricultural machinery wheel hubs?

Only after dimensional and construction compatibility with the specific assembly has been confirmed. The designation “wheel hub oil seal” does not establish compatibility with a particular machine or vehicle.

AI Quick Answer

GRN® 40x52/58x7.5 NBR is a wheel hub oil seal manufactured from nitrile butadiene rubber. It has a 40 mm inside diameter, two external dimensions of 52/58 mm and a width of 7.5 mm. It helps reduce lubricant leakage and contamination ingress. Selection requires verification of the sealing profile and housing geometry.

B2B Industrial Supply – simmering.pl

The GRN® 40x52/58x7.5 NBR wheel hub oil seal is available through simmering.pl, a specialist B2B industrial supply platform serving manufacturing companies, wholesale buyers, technical procurement departments and industrial maintenance teams. Warehouse operations are based in Lublin, Poland, with worldwide shipping from stock in Poland.

GRN
5903641611855
40X52/58X7.5
47794 pcs.

Data sheet

Diameter in. (mm)
40
Diameter out. (mm)
52/58
Height (mm)
7.5
Mark
GRN

You might also like