SKF BAHB 636035 A 30x72x37 mm - Double-Row Wheel Hub Ball Bearing

SKF BAHB 636035 A 30x72x37 mm - Double-Row Wheel Hub Ball Bearing

SKF BAHB 636035 A 30x72x37 mm is a double-row angular contact ball bearing designed for automotive wheel hub applications. Manufactured by SKF, this bearing has a 30 mm bore diameter, 72 mm outside diameter and 37 mm width. Its double-row construction accommodates radial loads and axial loads in both directions, making it suitable for appropriately designed wheel hub assemblies.

The complete designation BAHB 636035 A identifies a specific SKF bearing configuration. Correct replacement selection requires verification of the bearing construction, dimensions and vehicle compatibility.

Product Characteristics

SKF BAHB 636035 A belongs to the family of double-row angular contact ball bearings used in automotive wheel hub assemblies.

Unlike standard single-row deep groove ball bearings, double-row wheel hub bearings are designed to accommodate combined loads generated during driving, cornering and braking.

Key features:

• Manufacturer: SKF.

• Product designation: BAHB 636035 A.

• Nominal dimensions: 30x72x37 mm.

• Double-row angular contact ball bearing.

• Designed for automotive wheel hub applications.

• Accommodates radial loads.

• Supports axial loads in both directions.

• Two integrated rows of rolling elements.

• Sealed construction indicated in bearing catalogues.

• Compact design for wheel hub assemblies.

Technical Specifications

The exact dynamic load rating (C), static load rating (C0), limiting speed, internal clearance and contact angle have not been specified because product-specific manufacturer data must be verified.

What Does SKF BAHB 636035 A Mean?

Each part of the designation helps identify the correct bearing.

SKF - the manufacturer of rolling bearings and related industrial and automotive components.

BAHB - a designation used for a family of specialized SKF wheel hub bearings.

636035 - the reference number identifying a particular bearing configuration.

A - part of the complete bearing variant designation. This suffix should not be omitted when selecting a replacement.

30x72x37 mm - the nominal bearing dimensions.

The complete reference SKF BAHB 636035 A should be used when searching for or ordering a replacement.

Double-Row Angular Contact Ball Bearing Construction

SKF BAHB 636035 A features two rows of balls operating between specially designed raceways.

This construction enables the bearing to accommodate combined loads typical of automotive wheel hub assemblies.

Radial Loads

During vehicle operation, the bearing supports forces acting perpendicular to the wheel's rotational axis.

The magnitude of these loads depends on vehicle weight, road conditions and operating circumstances.

Axial Loads

When a vehicle turns, lateral forces generate axial loads on the wheel bearing.

The double-row angular contact arrangement enables axial loads to be supported in both directions.

Two Rows of Balls

Two integrated rows of rolling elements provide combined load-carrying capability within a compact bearing assembly.

This design is commonly used in automotive wheel hub bearings.

Sealed Wheel Hub Bearing Design

Industry catalogues identify SKF BAHB 636035 A as a sealed bearing.

Seals in automotive wheel bearings help:

• Reduce the entry of dirt and road contaminants.

• Retain lubricant inside the bearing.

• Protect the balls and raceways.

• Reduce the risk of premature wear caused by contamination.

• Support operation in demanding road environments.

The exact seal configuration and lubricant specification should be confirmed using documentation for the specific SKF bearing.

Typical Applications of SKF BAHB 636035 A

This bearing is intended for suitable automotive wheel hub assemblies where combined radial and axial loads occur.

Typical functions of a wheel hub bearing include:

• Supporting the rotating wheel assembly.

• Enabling smooth hub rotation.

• Accommodating loads during vehicle operation.

• Supporting lateral forces generated while cornering.

• Maintaining the correct positioning of wheel hub components.

Compatibility with a particular vehicle make, model or production year must be confirmed using the original equipment reference or an SKF application catalogue.

Why Bearing Dimensions Alone Are Not Enough

Different wheel hub bearings may share the same nominal dimensions of 30x72x37 mm while having different internal designs.

Possible differences include:

• Raceway geometry.

• Contact angle.

• Sealing arrangement.

• Internal clearance.

• Inner and outer ring configuration.

• Installation requirements.

• Vehicle-specific design features.

For this reason, SKF BAHB 636035 A should be selected using its complete designation or a verified equivalent part number.

Common Symptoms of a Worn Wheel Hub Bearing

A damaged wheel hub bearing may produce symptoms such as:

• Increasing humming or rumbling noise while driving.

• Noise that changes with vehicle speed.

• Changes in noise intensity while cornering.

• Excessive wheel play.

• Vibration.

• Abnormal heat around the wheel hub assembly.

These symptoms may also result from other mechanical problems. Proper diagnosis is necessary before replacing the bearing.

How to Select the Correct SKF BAHB 636035 A Bearing

Before ordering, verify:

1. Complete SKF reference BAHB 636035 A.

2. Bore diameter - 30 mm.

3. Outside diameter - 72 mm.

4. Overall width - 37 mm.

5. Double-row angular contact construction.

6. Sealing arrangement.

7. Original equipment part number.

8. Wheel hub and steering knuckle configuration.

9. Installation requirements.

10. Vehicle compatibility according to the manufacturer's catalogue.

Matching dimensions alone does not guarantee interchangeability.

Installation Guidelines for SKF 30x72x37 Wheel Hub Bearings

Correct installation is essential for bearing performance and vehicle safety.

Recommended precautions:

• Inspect the bearing housing before installation.

• Check the shaft, hub and mating surfaces.

• Remove dirt, corrosion and other contaminants.

• Never transmit installation force through the rolling elements.

• When pressing the bearing into the steering knuckle, apply force to the outer ring.

• When pressing the hub into the bearing, correctly support the appropriate inner ring.

• Avoid damaging the seals.

• Use the retaining components specified by the vehicle manufacturer.

• Follow the recommended tightening torques.

• Check correct installation before returning the vehicle to service.

Incorrect pressing procedures may damage the bearing raceways before the vehicle is driven.

Frequently Asked Questions

What are the dimensions of SKF BAHB 636035 A?

The bearing has a 30 mm bore diameter, 72 mm outside diameter and 37 mm overall width.

Is BAHB 636035 A a wheel hub bearing?

Yes. It is classified as a specialized automotive wheel hub bearing.

Is this a double-row bearing?

Yes. SKF BAHB 636035 A is a double-row angular contact ball bearing.

Can it accommodate axial loads?

Yes. Its construction enables it to accommodate axial loads in both directions as well as radial loads.

Is SKF BAHB 636035 A sealed?

Industry catalogues identify it as a sealed bearing. The exact sealing arrangement should be confirmed using product-specific technical documentation.

Is the bearing factory lubricated?

Sealed wheel hub bearings are generally supplied with factory-applied grease. The lubricant specification for this particular bearing should be confirmed with the manufacturer.

Can another 30x72x37 mm bearing replace it?

Not automatically. The internal construction, sealing arrangement and vehicle compatibility must also match.

Is the letter A important?

Yes. The letter A forms part of the complete bearing designation and should be retained when selecting a replacement.

Is SKF BAHB 636035 A a standard deep groove ball bearing?

No. It is classified as a double-row angular contact ball bearing designed for wheel hub applications.

How much does SKF BAHB 636035 A weigh?

Industry catalogue references indicate a weight of approximately 0.689 kg.

Can this bearing be installed without specialist tools?

Wheel hub bearing installation requires suitable pressing tools, knowledge of the assembly and the correct service procedure. Incorrect installation may damage the bearing and affect vehicle safety.

Which vehicles use SKF BAHB 636035 A?

Exact compatibility must be verified using the original equipment part number, vehicle identification number (VIN) or a manufacturer application catalogue.

What is the difference between a wheel hub bearing and a standard ball bearing?

A wheel hub bearing is specifically designed to accommodate the combined loads and installation requirements of an automotive wheel assembly. Standard industrial bearings may have different internal geometry and operating characteristics.

Does SKF BAHB 636035 A require regular relubrication?

Sealed automotive wheel hub bearings are generally designed to operate with factory-applied grease. Maintenance requirements depend on the specific bearing construction and vehicle manufacturer's instructions.

SKF BAHB 636035 A - Key Technical Information

SKF BAHB 636035 A is a double-row angular contact wheel hub ball bearing measuring 30x72x37 mm. Its construction accommodates radial loads and axial loads in both directions. The bearing is intended for compatible automotive wheel hub assemblies. Replacement selection requires confirmation of the complete SKF designation, bearing construction and vehicle application.

SKF Wheel Hub Bearings at simmering.pl

simmering.pl supplies SKF wheel hub bearings, deep groove ball bearings, angular contact ball bearings, tapered roller bearings, cylindrical roller bearings and other industrial bearing solutions.

Our range also includes rotary shaft oil seals, O-rings and mechanical sealing components.

We serve individual customers, automotive workshops, industrial maintenance departments and B2B buyers.

Our warehouse is located in Lublin, Poland, with shipping throughout Poland, across Europe and internationally.