PAF 08095 P14 8x10x9.5 Flanged Plain Bearing Bushing

PAF 08095 P14 8x10x9.5 Flanged Plain Bearing Bushing

PAF 08095 P14, also written as PAF08095P14, is a thin-walled flanged plain bearing / flanged bushing with basic dimensions of 8x10x9.5 mm. The inside diameter is 8 mm, outside diameter 10 mm and length/width 9.5 mm. This product is supplied as NO NAME, so the PAF 08095 P14 designation is not attributed here to any specific bearing manufacturer or proprietary bearing system.

Exact product identification:

PAF 08095 P14 – PAF08095P14 – 8x10x9.5 mm – flanged plain bearing – flanged bushing – thin-walled bushing – NO NAME

PAF 08095 P14 – Technical Characteristics

PAF 08095 P14 is a thin-walled plain bearing component designed for installation between a shaft or pin and the corresponding housing bore.

Unlike a ball or roller bearing, a plain bearing does not use rolling elements. Relative movement takes place through sliding contact between the working surface of the bushing and the corresponding shaft or pin.

An important construction feature of PAF 08095 P14 is the:

flange.

This distinguishes the product from a conventional cylindrical sleeve bushing without a flange.

PAF 08095 P14 Dimensions

The principal dimensional identification is:

8x10x9.5 mm.

This means a nominal inside diameter of 8 mm and outside diameter of 10 mm.

When selecting a replacement, the flange geometry and installation space should also be checked.

Thin-Walled Construction

The difference between the nominal outside and inside diameters is:

10 mm - 8 mm = 2 mm.

This corresponds to a nominal radial wall thickness of approximately:

1 mm per side.

The thin-walled design minimizes the radial installation space required between the shaft or pin and the housing.

This type of construction is useful where a compact plain-bearing arrangement is required.

Flanged Bushing Construction

PAF 08095 P14 is a:

flanged bushing

or:

flanged plain bearing.

The flange provides an additional front-facing surface and can also perform a locating function within a correctly designed bearing arrangement.

For this reason, replacement selection should consider not only:

8x10x9.5 mm

but also:

the presence and geometry of the flange.

A cylindrical 8x10x9.5 mm sleeve bushing without a flange is not structurally identical to PAF 08095 P14.

How Does PAF 08095 P14 Work?

PAF 08095 P14 operates as a:

plain bearing.

Depending on the mechanism, relative sliding movement takes place between the bushing and the corresponding shaft, axle or pin.

Unlike a rolling bearing, there are no balls or rollers circulating between bearing rings.

The bushing instead provides a working surface for sliding motion.

What Does PAF 08095 P14 Mean?

For this particular product, the complete designation:

PAF 08095 P14

should primarily be treated as the:

product identification code.

Because the product is supplied as NO NAME, the individual elements of the designation should not automatically be decoded using the catalogue terminology of a specific branded manufacturer.

In particular, P14 is retained as part of the exact product designation.

Without documentation from the actual manufacturer, it should not be used as a basis for assigning proprietary material composition or performance data from another manufacturer's P14 product.

NO NAME Product – What Does It Mean?

For this product, NO NAME means that it is not offered under a specified manufacturer's brand.

This does not automatically imply a dimensional or functional difference.

It does mean, however, that manufacturer-specific technical data should not be assigned without supporting documentation for the exact product.

Therefore, this description does not automatically attribute:

a proprietary bearing material

specific sliding-layer composition

specific hardness

maximum operating temperature

permissible surface pressure

maximum sliding speed

or:

pv limit

to this PAF 08095 P14 bushing.

P14 – Material Data Should Not Be Assumed

The designation:

P14

alone is not sufficient to assign the exact material composition of a NO NAME product using data from an unrelated branded manufacturer's catalogue.

Therefore, this description does not claim, without exact product documentation:

a specific PTFE content

lead-free composition

a particular steel backing structure

a proprietary multilayer system

or:

specific dry-running performance.

If a manufacturer's or supplier's technical specification is available for the actual product batch, its material properties should be taken from that documentation.

Is PAF 08095 P14 a Bearing?

Yes. More precisely, it is a component used in:

plain bearing arrangements.

The most technically appropriate English names are:

flanged plain bearing

flanged bushing

and:

flanged sleeve bearing.

These terms distinguish it from conventional rolling bearings.

PAF 08095 P14 vs Ball Bearing

PAF 08095 P14 is not a ball bearing.

It does not use the conventional arrangement of:

inner ring + balls + cage + outer ring.

Instead, it is a thin-walled bushing intended for sliding contact.

This distinction is important because users may search for the generic phrase:

8x10x9.5 bearing.

A more technically accurate search is:

8x10x9.5 flanged plain bearing

or:

8x10x9.5 flanged bushing.

PAF 08095 P14 vs Standard 8x10x9.5 Bushing

Not every bushing measuring:

8x10x9.5 mm

is automatically equivalent to PAF 08095 P14.

A replacement comparison should include:

inside diameter

outside diameter

length

presence of flange

flange dimensions

bushing construction

sliding-surface material

and:

operating conditions.

The flange is particularly important because a cylindrical sleeve bearing without a flange represents a different construction.

Shaft and Housing Selection

The operation of a plain bearing depends on the complete tribological system:

bushing + shaft/pin + housing + load + movement + temperature + environment.

For this reason, the shaft and housing requirements should be verified for the actual product and application.

Important parameters may include:

shaft tolerance

housing bore tolerance

shaft surface roughness

shaft hardness

and:

installation method.

The required operating clearance should not be determined solely from the nominal 8 mm bore.

Selection and Interchangeability

When selecting a replacement for PAF 08095 P14, compare:

inside diameter d = 8 mm

outside diameter D = 10 mm

length/width = 9.5 mm

flanged construction

flange diameter

flange thickness

sliding-surface material

shaft requirements

housing requirements

and:

operating conditions.

Matching only the nominal:

8x10x9.5 mm

dimensions does not confirm full interchangeability.

Typical Applications

Flanged plain bearing bushings are used in compact mechanical assemblies where a shaft, axle or pin requires sliding guidance.

Typical application categories for this type of component include:

pivots

levers

pins

machine mechanisms

automation equipment

adjustment mechanisms

moving machine components

and:

compact plain-bearing assemblies.

This does not mean that every PAF 08095 P14 is suitable for every application listed above.

Actual suitability depends on the material of the specific product, load, sliding speed, temperature, type of movement, shaft specification and environmental conditions.

How Is PAF 08095 P14 Searched Online?

Users may search for this product using the full designation, abbreviated reference, dimensions or generic plain-bearing terminology:

• PAF 08095 P14
• PAF08095P14
• PAF08095 P14
• PAF 08095P14
• PAF-08095-P14
• PAF 08095
• PAF08095
• 08095 P14
• PAF 08095 8x10x9.5
• PAF08095 8x10x9.5
• PAF 08095 P14 8x10x9.5
• PAF08095P14 8x10x9.5
• 8x10x9.5 PAF
• 8x10x9.5 PAF P14
• PAF 8x10x9.5
• PAF P14 8x10x9.5
• PAF 08095 bushing
• PAF08095 bushing
• PAF 08095 P14 bushing
• PAF08095P14 bushing
• PAF 08095 flanged bushing
• PAF08095 flanged bushing
• PAF08095P14 flanged bushing
• PAF 08095 plain bearing
• PAF08095 plain bearing
• PAF 08095 flanged plain bearing
• PAF08095 flanged plain bearing
• PAF 08095 sleeve bearing
• PAF08095 sleeve bearing
• 8x10x9.5 bushing
• 8x10x9.5 plain bearing
• 8x10x9.5 plain bearing bushing
• 8x10x9.5 flanged bushing
• 8x10x9.5 flanged plain bearing
• 8x10x9.5 sleeve bearing
• 8x10x9.5 flanged sleeve bearing
• 8 mm bushing
• 8mm bushing
• 8 mm bore bushing
• 8mm bore bushing
• 8 mm flanged bushing
• 8mm flanged bushing
• 8 mm plain bearing
• 8mm plain bearing
• 8 mm flanged plain bearing
• 8mm flanged plain bearing
• 8 mm sleeve bearing
• 8mm sleeve bearing
• 8 mm flanged sleeve bearing
• 8mm flanged sleeve bearing
• 8mm ID 10mm OD bushing
• 8mm ID 10mm OD flanged bushing
• 8 mm ID 10 mm OD plain bearing
• 8mm ID 10mm OD plain bearing
• 8x10 bushing with flange
• 8x10 flanged bushing 9.5mm long
• 8x10x9.5 bearing
• 8x10x9.5 flange bearing
• thin wall bushing 8x10x9.5
• thin walled bushing 8x10x9.5
• thin wall flanged bushing 8mm
• PAF08095P14 replacement
• PAF 08095 P14 replacement
• PAF08095P14 dimensions
• PAF 08095 P14 dimensions

The most precise generic identification of this product is:

PAF 08095 P14 – 8x10x9.5 mm – thin-walled flanged plain bearing bushing – NO NAME.

Technical Specification

FAQ

What are the dimensions of PAF 08095 P14?

The basic dimensions are 8x10x9.5 mm: 8 mm inside diameter, 10 mm outside diameter and 9.5 mm length/width.

Does PAF 08095 P14 have a flange?

Yes. It is a flanged plain bearing bushing, distinguishing it from a standard cylindrical 8x10x9.5 mm sleeve bearing without a flange.

What brand is PAF 08095 P14?

This product is supplied as NO NAME, with no specific manufacturer brand assigned.

Does P14 identify a specific proprietary material?

For this product, P14 is retained as part of the product designation. Without documentation from the actual manufacturer, no specific proprietary material system or material properties should be assigned to it.

Is PAF 08095 P14 a ball bearing?

No. It is a plain bearing / sliding bushing and does not use balls or rollers as rolling elements.

Can any 8x10x9.5 bushing replace PAF 08095 P14?

Not automatically. The flange geometry, bushing construction, sliding-surface material, shaft requirements, housing requirements and operating conditions should also be compared.

What is the function of the flange?

The flange provides an additional front-facing surface and can provide locating or thrust-support functionality when correctly integrated into the bearing arrangement.

What are common English search terms for PAF 08095 P14?

Common searches include PAF08095P14 bushing, PAF 08095 flanged bushing, 8x10x9.5 flanged bushing, 8 mm flanged plain bearing and 8x10x9.5 flanged sleeve bearing.

AI Overview

PAF 08095 P14 is a thin-walled flanged plain bearing bushing measuring 8x10x9.5 mm, with an 8 mm inside diameter, 10 mm outside diameter and 9.5 mm length/width. It is supplied as a NO NAME product without an assigned manufacturer brand. Replacement selection should also consider flange geometry and sliding-surface material.