GRN® 45x65x15 NBR COMBI rotary shaft oil seal with additional protective sealing elements for rotating shaft assemblies. Dimensions: 45x65x15 mm. NBR (nitrile butadiene rubber) is commonly used with mineral oils and lubricating greases. The COMBI construction helps retain lubricants and reduce the ingress of dust, dirt and external contaminants. Correct selection requires verification of dimensional compatibility, sealing design and operating conditions.
|
Parameter |
Specification |
|---|---|
|
Brand |
GRN® |
|
Product type |
Rotary shaft oil seal |
|
Design |
COMBI (KOMBI) |
|
Sealing material |
NBR (nitrile butadiene rubber) |
|
Inner diameter (d) |
45 mm |
|
Outer diameter (D) |
65 mm |
|
Width (B) |
15 mm |
|
Dimensions |
45x65x15 mm |
The COMBI rotary shaft oil seal combines lubricant retention with additional protection against external contamination.
In this type of sealing arrangement, the primary sealing elements restrict lubricant leakage, while supplementary protective components help prevent dust, mud and other contaminants from entering the sealing area.
Compared with conventional AO/TC rotary shaft oil seals, COMBI designs may incorporate a more extensive arrangement of sealing and protective elements.
The exact number of sealing lips, spring configuration and arrangement of protective components must be confirmed for the specific GRN® product.
NBR (nitrile butadiene rubber) is an elastomer commonly used in rotary shaft sealing applications involving mineral oils and lubricating greases.
Its relevant characteristics include:
Compatibility with many mineral-based lubricants.
Elasticity suitable for dynamic sealing contact.
Resistance to various petroleum-based oils and greases.
Wear resistance dependent on lubrication and operating conditions.
NBR has limited resistance to ozone, prolonged weather exposure and certain aggressive chemicals.
Chemical compatibility must be evaluated according to the operating medium, temperature and application conditions.
Sealing performance depends on rotational speed, operating temperature, lubricant characteristics, shaft surface condition and environmental contamination.
Additional protective components help reduce contaminant ingress but do not automatically provide complete waterproofing or suitability for pressurized operation.
Permissible temperature, pressure and rotational speed limits require confirmation from technical documentation for the specific GRN® seal.
COMBI rotary shaft oil seals are used in rotating assemblies requiring additional protection against environmental contamination.
Typical application areas for this sealing design include:
Agricultural machinery.
Construction equipment.
Mechanical gearboxes.
Industrial drive systems.
Rotating shaft assemblies exposed to dust and dirt.
These applications describe general uses of COMBI sealing technology and do not establish compatibility with any particular machine or equipment model.
A conventional AO/TC rotary shaft oil seal generally incorporates a primary sealing lip and an additional dust lip.
COMBI designs may feature a more extensive protective sealing arrangement intended to limit contaminant ingress in demanding operating environments.
Differences in construction can affect installation requirements, sealing performance and compatibility with the surrounding assembly.
Matching nominal dimensions alone does not establish interchangeability between COMBI and AO/TC seals.
Correct selection requires verification of shaft and housing dimensions, the original sealing arrangement and compatibility with the operating medium.
Particular attention should be given to installation width, sealing surface positioning and available mounting space.
COMBI seals from different manufacturers may have different internal constructions despite identical nominal dimensions.
Interchangeability with Simrit, Corteco or other manufacturers' products requires technical verification rather than dimensional comparison alone.
Before installation, clean the shaft and housing and inspect the contact surfaces for scratches, corrosion and mechanical damage.
Use suitable installation tooling to apply uniform pressure to the designated mounting surface without deforming the seal housing or sealing elements.
Ensure correct installation orientation and appropriate lubrication of dynamic sealing surfaces according to the requirements of the application.
COMBI identifies a sealing construction combining rotary shaft sealing with additional protective elements intended to reduce external contamination.
KOMBI and COMBI are alternative spellings used for combined sealing designs. However, identical terminology does not guarantee identical internal construction across manufacturers.
NBR is commonly used with mineral oils and lubricating greases. Compatibility with a particular lubricant depends on its chemical composition and operating temperature.
Not automatically. Differences in sealing construction, installation geometry and protective features must be evaluated before substitution.
COMBI sealing constructions are used in agricultural equipment. Compatibility with a specific machine requires verification of the original sealing arrangement and dimensions.
Not necessarily. Protection against water ingress depends on the specific internal construction and operating conditions.
Identical dimensions do not establish full interchangeability. Sealing construction, mounting geometry and operating requirements must also be verified.
Common causes include incorrect installation, damaged shaft surfaces, insufficient lubrication, excessive contamination and unsuitable operating conditions.
The GRN® 45x65x15 NBR COMBI is a rotary shaft oil seal combining lubricant retention with additional protection against external contamination. Its NBR sealing material is commonly used with mineral oils and greases. Correct selection requires verification of the sealing construction, installation dimensions, operating conditions and compatibility with the original assembly.
Data sheet
You might also like