- New
KFL 004 ASAHI is a self-aligning, two-bolt flange bearing unit from the Silver series for a 20 mm shaft. K004 ball bearing insert with FL04-5 die-cast zinc alloy housing. Housing dimensions 90x55 mm, mounting hole spacing 71 mm, M8 bolts. Basic dynamic load rating 9.35 kN and static load rating 5.1 kN for the insert. Catalogue weight 0.190 kg. Set screw shaft locking. Specialist B2B industrial trading platform simmering.pl. Stock availability in Poland subject to confirmation.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
ASAHI Seiko |
|
Brand |
ASAHI |
|
Full designation |
KFL004 |
|
Alternative designation |
KFL 004 |
|
Product type |
Two-bolt flange bearing unit |
|
Series |
Silver, KFL000 |
|
Construction |
Oval two-bolt flange housing with ball bearing insert |
|
Bore diameter d |
20 mm |
|
Overall housing length H |
90 mm |
|
Housing width L |
55 mm |
|
Mounting hole centre distance J |
71 mm |
|
Mounting hole dimension N |
10 mm |
|
Dimension A |
16 mm |
|
Dimension A1 |
8 mm |
|
Dimension A2 |
8 mm |
|
Dimension A0 |
23 mm |
|
Inner ring width B |
21 mm |
|
Dimension S |
6 mm |
|
Dimension A4 |
31 mm |
|
Dimension A6 |
6 mm |
|
Mounting bolts |
M8 |
|
Bearing insert |
K004 |
|
Housing designation |
FL04-5 |
|
Housing material |
Die-cast zinc alloy |
|
Shaft locking method |
Set screws |
|
Basic dynamic load rating Cr |
9.35 kN |
|
Basic static load rating C0r |
5.1 kN |
|
Catalogue unit weight |
0.190 kg |
The dimensional data, load ratings and weight are based on ASAHI catalogue information for the Silver series.
The dynamic and static load ratings refer to the K004 bearing insert, not to the structural load capacity of the complete housing assembly.
|
Designation element |
Technical meaning |
|---|---|
|
KFL |
ASAHI compact two-bolt flange bearing unit series with set screw shaft locking |
|
004 |
Unit size corresponding to a 20 mm shaft diameter |
|
ASAHI |
Manufacturer's brand, ASAHI Seiko |
The designation KFL004 identifies the complete bearing unit, not the bearing insert or the empty housing separately.
The individual components have their own designations:
K004 - ball bearing insert.
FL04-5 - flange housing.
The basic KFL004 designation does not include an additional suffix identifying a cover-equipped version.
The K004 insert is a single-row ball bearing with a spherical outer surface on its outer ring.
This spherical surface works with the corresponding seating geometry of the housing, allowing limited angular adjustment of the bearing axis relative to the housing during installation.
The self-aligning arrangement helps compensate for minor mounting misalignment.
The bearing primarily supports radial loads and can accommodate permissible axial loads, depending on operating conditions and shaft locking arrangements.
The FL04-5 housing has an oval configuration with two mounting holes.
It is manufactured from die-cast zinc alloy, a construction characteristic of ASAHI's compact Silver series.
The housing allows the bearing unit to be mounted onto a suitable machine surface.
Its compact construction is intended for applications where installation dimensions and available mounting space are important considerations.
The inner ring of the K004 bearing insert is secured to the shaft using set screws.
After positioning the unit, the screws lock the inner ring to the shaft to prevent unwanted relative movement.
This locking method must not be substituted with another arrangement without verifying the compatibility of the bearing insert and shaft design.
The main dimensions relevant to replacement and installation are:
|
Dimension |
Value |
|---|---|
|
Shaft diameter |
20 mm |
|
Overall housing dimensions |
90x55 mm |
|
Mounting hole centre distance |
71 mm |
|
Mounting hole dimension |
10 mm |
|
Overall axial dimension A0 |
23 mm |
|
Inner ring width B |
21 mm |
|
Mounting bolt size |
M8 |
The dimensions 90x55 mm describe the flange housing envelope. They are not the d x D x B dimensions of the bearing insert.
When comparing replacement units, the dimensional symbols and their definitions must correspond to the manufacturers' technical drawings.
ASAHI specifies the following load ratings for the K004 bearing insert:
|
Parameter |
Catalogue value |
|---|---|
|
Basic dynamic load rating Cr |
9.35 kN |
|
Basic static load rating C0r |
5.1 kN |
The basic dynamic load rating is used in bearing fatigue life calculations under defined loading conditions.
The basic static load rating is used to assess the risk of permanent deformation at the rolling element and raceway contacts.
These values do not independently establish the maximum permissible load of the complete KFL004 bearing unit.
Selection must also consider the strength of the zinc alloy housing, mounting arrangement, axial loads, rotational speed and operating conditions.
KFL004 is the standard flange bearing unit in the Silver series.
ASAHI also identifies versions equipped with additional covers.
|
Designation |
Construction |
|---|---|
|
KFL004 |
Standard flange bearing unit |
|
KFL004C |
Version with an additional cover on the through-shaft side |
|
KFL004E |
Version with an end cover for the shaft end |
The C and E suffixes in these unit designations identify cover arrangements, not increased bearing internal clearance.
Cover-equipped variants require additional installation space and may differ in their external dimensions.
They should not be treated as automatically interchangeable with the standard unit.
|
Designation |
Shaft diameter |
Housing dimensions |
Mounting hole centre distance |
|---|---|---|---|
|
KFL003 |
17 mm |
71x46 mm |
56 mm |
|
KFL004 |
20 mm |
90x55 mm |
71 mm |
|
KFL005 |
25 mm |
95x60 mm |
75 mm |
These units differ in bore diameter, housing geometry, mounting dimensions and bearing insert load ratings.
They are not direct replacements for one another.
KFL004 is a two-bolt flange bearing unit designed for mounting against a suitable supporting surface.
KP004 belongs to the compact pillow block bearing unit family.
The primary difference is the housing configuration and mounting arrangement.
Although both belong to the ASAHI compact bearing unit range, they are not directly interchangeable.
Before ordering KFL 004 ASAHI, verify:
Complete manufacturer designation KFL004.
Shaft diameter of 20 mm.
Housing dimensions of 90x55 mm.
Mounting hole centre distance of 71 mm.
M8 mounting bolt arrangement.
K004 bearing insert.
Shaft locking method.
Housing material.
Required dynamic and static load ratings.
Direction and nature of applied loads.
Rotational speed.
Lubrication and contamination conditions.
Available installation space.
Requirements for optional protective covers.
Bearing units identified as KFL004 by different manufacturers may differ in housing material, sealing arrangement, bearing insert design and operating characteristics.
Identical shaft diameters and mounting hole distances do not guarantee complete interchangeability.
A replacement must be evaluated against the complete dimensional drawing and technical specifications.
Due to its compact two-bolt flange construction, KFL004 may be considered for suitably designed shaft support arrangements in:
Small conveyor systems.
Material handling mechanisms.
Packaging machinery.
Industrial production equipment.
Auxiliary mechanical assemblies.
Drive systems operating within the unit's permissible loading conditions.
These are typical applications for this type of bearing unit, not verified OEM applications of a specific machine model.
The suitability of KFL004 for a particular installation depends on load conditions, shaft arrangement, rotational speed and environmental requirements.
Natural designation variants include:
KFL004 ASAHI
KFL 004 ASAHI
ASAHI KFL004
ASAHI KFL 004
KFL004
KFL 004
ASAHI KFL004 20 mm
ASAHI KFL004 flange bearing unit
ASAHI KFL004 two-bolt flange bearing unit
KFL004 20 mm bearing unit
Component designations:
K004 - bearing insert.
FL04-5 - flange housing.
These component designations are not OEM reference numbers for specific machines and do not independently establish interchangeability between complete bearing units.
Before installation, clean the shaft, mounting surface and mounting holes.
Position the bearing unit so that the flange housing contacts the supporting surface correctly without being distorted by the mounting bolts.
During installation, avoid transmitting assembly forces through the rolling elements and raceways.
Tighten the shaft locking set screws according to the manufacturer's instructions for the specific bearing insert.
After installation, check that the shaft rotates freely, the bearing is correctly aligned and the housing is not subjected to excessive mounting stress.
KFL004 belongs to the compact ASAHI Silver series.
Before performing lubrication maintenance, verify the construction of the specific bearing insert and the manufacturer's recommendations.
During operation, monitor bearing temperature, noise, vibration and seal condition.
Store the bearing unit in a clean, dry environment protected from moisture, dust and mechanical damage.
Keep the bearing protected until installation to reduce the risk of contamination.
What are the dimensions of KFL 004 ASAHI?
The unit is designed for a 20 mm shaft. The housing measures 90x55 mm, the mounting hole centre distance is 71 mm, and the A0 dimension is 23 mm.
Which bearing insert is used in ASAHI KFL004?
The unit incorporates a K004 ball bearing insert installed in an FL04-5 flange housing.
What material is the KFL004 housing made from?
The housing is manufactured from die-cast zinc alloy.
How is KFL004 ASAHI mounted?
The flange housing is secured using two M8 mounting bolts. The bearing insert's inner ring is locked onto the shaft using set screws.
What are the load ratings of KFL004 ASAHI?
The K004 bearing insert has a basic dynamic load rating of 9.35 kN and a basic static load rating of 5.1 kN. The permissible load of the complete unit also depends on the housing and mounting conditions.
Is KFL004 a self-aligning bearing unit?
Yes. The spherical outer surface of the bearing insert allows limited angular adjustment relative to the housing, helping compensate for minor mounting misalignment.
What is the difference between KFL004 and KFL004C?
KFL004 is the standard version, while KFL004C includes an additional cover. Installation space and cover configuration must be checked when selecting a replacement.
Can KFL004 from another manufacturer replace ASAHI KFL004?
Not automatically. The complete dimensions, housing construction, bearing insert, shaft locking arrangement and operating parameters must be compared.
KFL 004 ASAHI is a self-aligning, two-bolt flange bearing unit from the Silver series, designed for a 20 mm shaft. It combines a K004 ball bearing insert with an FL04-5 die-cast zinc alloy housing. Housing dimensions are 90x55 mm, with 71 mm mounting hole spacing. Set screws secure the insert to the shaft.
The KFL 004 ASAHI flange bearing unit is intended for industrial procurement, machine manufacturers, maintenance departments and technical service companies.
The specialist B2B industrial trading platform simmering.pl enables product identification by the ASAHI KFL004 manufacturer designation, 20 mm shaft diameter and mounting dimensions.
Stock availability in Poland and delivery times should be confirmed before ordering. Worldwide shipping from stock in Poland is subject to product availability and delivery conditions.