24B-1 Z12 - 12-Tooth Simplex Chain Sprocket, 38.10 mm Pitch
Processing time: 2-3 days
€65.50
(net)
Price for: 1pcs.
24B-1 Z12 simplex roller chain sprocket with 12 teeth and a 38.10 mm (1 1/2") pitch. Designed for 24B-1 roller chains according to ISO 606 / DIN 8187. Pitch circle diameter approximately 147.22 mm and typical outside diameter 162 mm. Suitable for industrial chain transmission systems. Verify bore diameter, hub configuration and shaft mounting before ordering. Available through the specialist B2B platform simmering.pl, with worldwide shipping from stock in Poland.
Technical Specifications
Parameter Specification
Product designation 24B-1 Z12
Product type Roller chain sprocket
Compatible chain 24B-1
Chain configuration Simplex (single-strand)
Number of teeth 12
Chain pitch 38.10 mm (1 1/2")
Pitch circle diameter Approx. 147.22 mm
Typical outside diameter 162 mm
Chain standard ISO 606 / DIN 8187
Manufacturer Not specified
Bore diameter Depends on configuration
Hub design Depends on manufacturer
The outside diameter is a typical catalog value for standard 24B-1 Z12 sprockets and should be verified against the manufacturer's drawing.
What Does 24B-1 Z12 Mean?
The designation identifies the sprocket's compatibility with a specific roller chain size and tooth configuration.
- 24B - European B-series roller chain size with a pitch of 38.10 mm.
- -1 - Simplex configuration, designed for a single-strand roller chain.
- Z12 - Sprocket with 12 teeth.
The complete designation is important when selecting replacement components for existing chain transmission systems.
Design and Operating Principle
The 24B-1 Z12 sprocket features a tooth profile designed to engage with the rollers of a 24B-1 chain.
During operation, the sprocket teeth engage successive chain rollers, transferring torque and rotational movement between connected shafts.
The 12-tooth configuration produces a relatively compact sprocket geometry. However, the limited number of teeth must be considered when evaluating polygonal action, dynamic loading, chain wear and permissible operating speed.
The sprocket's final installation characteristics depend on its bore diameter, hub configuration and shaft attachment method.
24B-1 Z12 Compared with Other Sprocket Variants
Designation Chain configuration Number of teeth
24B-1 Z12 Simplex 12
24B-1 Z13 Simplex 13
24B-1 Z15 Simplex 15
24B-2 Z12 Duplex 12
Sprockets with different tooth counts change the transmission ratio and operating characteristics of a chain drive.
A 24B-2 duplex sprocket is not a direct replacement for a 24B-1 simplex sprocket.
Selection and Interchangeability
Before purchasing a 24B-1 Z12 sprocket, verify the following characteristics:
- Compatibility with the 24B-1 roller chain.
- Number of teeth and chain pitch.
- Bore diameter and shaft fit.
- Hub dimensions and configuration.
- Keyway or other shaft-locking arrangement.
- Required transmission ratio.
- Operating speed and transmitted torque.
- Installation space and chain alignment.
Identical chain pitch and tooth count do not automatically guarantee complete interchangeability between sprockets from different manufacturers.
Typical Applications
24B-1 Z12 sprockets can be used in industrial chain transmission systems, including conveyor drives, material handling equipment, mechanical drive assemblies and industrial machinery.
Suitability for a particular application depends on the operating load, rotational speed, lubrication conditions and overall transmission design.
These are typical applications of this sprocket category, not confirmed OEM applications of a specific manufacturer's product.
Installation and Maintenance
Correct sprocket installation requires proper shaft alignment, suitable mounting tolerances and accurate positioning relative to the mating sprocket.
Chain tension should be adjusted according to the drive manufacturer's recommendations. Excessive tension can increase bearing loads and accelerate chain wear, while insufficient tension may lead to unstable operation.
Regular inspection of tooth wear, chain elongation, alignment and lubrication helps maintain reliable transmission performance.
Frequently Asked Questions (FAQ)
What chain fits the 24B-1 Z12 sprocket?
The sprocket is designed for a 24B-1 simplex roller chain with a pitch of 38.10 mm.
How many teeth does the 24B-1 Z12 sprocket have?
It has 12 teeth.
What is the pitch circle diameter of a 24B-1 Z12 sprocket?
The calculated pitch circle diameter is approximately 147.22 mm.
What is the outside diameter of the sprocket?
Standard catalog designs commonly specify an outside diameter of approximately 162 mm. The exact dimension should be confirmed for the selected manufacturer.
Can a 24B-1 Z12 sprocket be used with a 24B-2 chain?
No. A 24B-1 sprocket is designed for a simplex chain, while a 24B-2 chain has a duplex configuration.
Does the sprocket have a finished bore?
This depends on the product version. Sprockets may be supplied with a pilot bore or a finished bore suitable for a specific shaft diameter.
Can a 24B-1 Z12 sprocket from another manufacturer be used as a replacement?
Potentially, provided the chain compatibility, tooth geometry, bore diameter, hub dimensions and mounting arrangement are equivalent.
24B-1 Z12 - Key Information
The 24B-1 Z12 is a 12-tooth simplex roller chain sprocket with a 38.10 mm pitch, designed for ISO 606 / DIN 8187 chain transmission systems. Its calculated pitch diameter is approximately 147.22 mm, with a typical outside diameter of 162 mm. Bore dimensions and hub configuration must be verified before installation.
The product category is available through the specialist B2B trading platform simmering.pl, offering industrial power transmission components with worldwide shipping from stock in Poland, subject to availability.
24B-1 Z12 simplex roller chain sprocket with 12 teeth and a 38.10 mm (1 1/2") pitch. Designed for 24B-1 roller chains according to ISO 606 / DIN 8187. Pitch circle diameter approximately 147.22 mm and typical outside diameter 162 mm. Suitable for industrial chain transmission systems. Verify bore diameter, hub configuration and shaft mounting before ordering. Available through the specialist B2B platform simmering.pl, with worldwide shipping from stock in Poland.