• New
3R-SPC4250 Optibelt - pas klinowy zespolony 3-zebrowy SPC 4250 mm
search
  • 3R-SPC4250 Optibelt - pas klinowy zespolony 3-zebrowy SPC 4250 mm

3R-SPC4250 Optibelt - pas klinowy zespolony 3-zebrowy SPC 4250 mm

4014486421354
2 pcs.
€471.49 (net)
Price for: 1pcs.

Optibelt 3R-SPC4250 is a three-rib banded V-belt with an SPC profile and nominal datum length of 4250 mm. Three parallel ribs connected by a common backing band improve tracking stability in multi-groove belt drives. The nominal width of an individual SPC profile is 22 mm. Designed for industrial power transmission systems, including drives exposed to vibration and shock loads. Available through the specialized B2B trading platform simmering.pl, with stock in Lublin, Poland, and worldwide shipping.

Quantity

Technical Specifications of Optibelt 3R-SPC4250

Parameter

Specification

Manufacturer

Optibelt

Complete designation

3R-SPC4250

Product type

Banded V-belt

Product family

Optibelt KB - banded V-belts

Belt profile

SPC

Number of ribs

3

Datum length Ld

4250 mm

Nominal width of individual SPC profile

22 mm

Approximate overall belt height

22.6 mm

Construction

Three V-belt ribs connected by a common backing band

Power transmission method

Friction drive

Compatible pulleys

Multi-groove pulleys suitable for banded SPC belts

The 4250 mm value refers to the nominal datum length, not the inside or outside length.

The approximate overall height of 22.6 mm refers to a banded belt construction and must not be confused with the nominal 18 mm height of an individual SPC V-belt.

The exact backing band dimensions and rib spacing should be verified for the specific Optibelt execution.

What Does Optibelt 3R-SPC4250 Mean?

The designation identifies the manufacturer, number of ribs, belt profile and nominal length.

  • Optibelt - Manufacturer of industrial power transmission components.

  • 3R - Three parallel V-belt ribs connected into a single banded belt.

  • SPC - Narrow-section V-belt profile with a nominal width of 22 mm.

  • 4250 - Nominal datum length Ld of 4250 mm.

The designation 3R-SPC4250 identifies the belt configuration but does not independently establish every material or construction characteristic.

In particular, it does not conclusively identify the product as a KB SK, KB RED POWER or KB BLUE POWER execution.

The exact product version must be confirmed using the manufacturer's documentation or the marking on the supplied belt.

Alternative Designations and Reference Numbers

Common written variations include:

  • Optibelt 3R-SPC4250

  • 3R-SPC4250 Optibelt

  • Optibelt 3R SPC 4250

  • Optibelt 3/SPC4250

  • Optibelt 3-SPC4250

  • SPC 4250-3 KRAFTBAND Optibelt

  • Optibelt SPC4250 3-rib banded V-belt

The formats 3/SPC4250 and SPC 4250-3 may appear in industrial catalogues and distributor listings.

However, these alternative formats should not automatically be treated as confirmation of an identical material or product execution.

No unverified OEM references or cross-manufacturer replacement numbers have been assigned.

Construction and Operating Principle

Optibelt 3R-SPC4250 consists of three parallel V-belt ribs with trapezoidal cross-sections connected by a common backing band.

Each rib engages with a corresponding groove in the pulley.

Torque is transmitted through friction between the sidewalls of the belt ribs and the pulley groove surfaces.

The common backing band maintains the relative position of the three ribs and limits their independent lateral movement.

Compared with three separate SPC V-belts, the banded construction provides improved lateral stability and reduces the risk of individual belts twisting or rolling over in pulley grooves.

These characteristics are particularly relevant in belt drives exposed to:

  • Mechanical vibration.

  • Shock loads.

  • Fluctuating torque.

  • Long pulley centre distances.

  • Unstable tracking of individual V-belts.

The banded construction does not compensate for incorrect pulley geometry, excessive misalignment or improper belt tension.

Correct installation and drive design remain essential.

Optibelt 3R-SPC4250 Compared with Three Individual SPC4250 V-Belts

Parameter

3R-SPC4250

Three individual SPC4250 belts

Belt profile

SPC

SPC

Number of ribs or belts

3

3

Datum length

4250 mm

4250 mm per belt

Rib connection

Common backing band

No connection

Lateral stability

Mechanically connected ribs

Belts operate independently

Resistance to belt twisting

Improved by banded construction

Depends on operating conditions

Installation

One banded belt

Three separate belts

Optibelt 3R-SPC4250 should not automatically be replaced with three individual SPC4250 V-belts.

Although the nominal profile and length may be identical, the different construction can affect drive performance, especially under vibration and shock loading.

Before making a substitution, the pulley arrangement and machine manufacturer's requirements must be verified.

Belt Selection and Interchangeability

Before purchasing Optibelt 3R-SPC4250, verify the following:

  • Complete manufacturer designation 3R-SPC4250.

  • Manufacturer and exact product execution.

  • SPC belt profile.

  • Number of ribs: 3.

  • Datum length Ld: 4250 mm.

  • Pulley groove geometry.

  • Groove spacing and available installation width.

  • Pulley centre distance.

  • Belt tension adjustment range.

  • Required transmitted power.

  • Rotational speed.

  • Operating load characteristics.

  • Ambient temperature and environmental conditions.

Particular attention should be paid to pulley groove spacing and compatibility with the common backing band.

An identical nominal length of 4250 mm does not guarantee interchangeability with belts of a different profile or construction.

The overall width of the banded belt must also be compatible with the pulley arrangement.

Typical Applications of Banded SPC V-Belts

Three-rib banded SPC V-belts are used in industrial power transmission systems requiring stable tracking of multiple belt ribs.

Typical applications of this belt category include:

  • Industrial production machinery.

  • Multi-groove belt transmissions.

  • Drives exposed to shock loads.

  • Equipment operating under vibration.

  • Material handling and processing machinery.

  • Belt drives with relatively long pulley centre distances.

These are typical applications of banded SPC V-belts, not confirmed OEM applications of the exact Optibelt 3R-SPC4250 designation.

Suitability for a specific machine must be determined from the drive specifications and operating conditions.

Installation and Maintenance

Before installation, clean the pulley grooves and inspect them for wear, damage and contamination.

Verify pulley alignment and ensure that the groove geometry and spacing are suitable for the banded SPC belt.

The belt should be installed after reducing the pulley centre distance or releasing the tensioning mechanism.

Do not force the belt onto the pulleys using screwdrivers or other sharp tools.

After installation, adjust belt tension according to Optibelt recommendations for the relevant belt execution.

Insufficient tension may cause slipping, overheating and accelerated wear.

Excessive tension increases radial loads on shafts and bearings.

During operation, regularly inspect:

  • Rib sidewalls for wear.

  • The common backing band for cracks or damage.

  • Belt tension.

  • Pulley alignment.

  • Belt tracking.

  • Signs of slipping or overheating.

Store the belt in a clean, dry environment away from direct sunlight, excessive heat and substances that may damage elastomeric materials.

Frequently Asked Questions (FAQ)

What is Optibelt 3R-SPC4250?

Optibelt 3R-SPC4250 is a three-rib banded V-belt consisting of three parallel SPC-profile ribs connected by a common backing band. It is designed for industrial belt drive systems.

What is the length of Optibelt 3R-SPC4250?

The nominal datum length Ld is 4250 mm. This value must not be confused with the belt's inside or outside length.

What does 3R mean in the belt designation?

3R identifies three parallel V-belt ribs connected into a single banded belt. Each rib operates in a separate pulley groove.

What are the dimensions of the SPC profile?

The nominal width of the SPC profile is 22 mm. The nominal height of a standard individual SPC V-belt is approximately 18 mm, while the overall height of certain banded constructions may be approximately 22.6 mm.

Can Optibelt 3R-SPC4250 be replaced with three individual SPC4250 belts?

Not automatically. The banded belt has a common backing band that stabilizes the ribs, giving it different operating characteristics from three independent V-belts.

Are Optibelt 3R-SPC4250 and 3R-SPB4250 interchangeable?

No. SPC and SPB have different cross-sectional geometries and require pulleys with the appropriate groove profiles.

Is Optibelt 3R-SPC4250 suitable for shock-loaded drives?

Banded V-belts are commonly used in drives exposed to vibration and shock loads. However, the suitability of the exact belt execution must be verified against the drive specifications.

How should Optibelt 3R-SPC4250 be tensioned?

Belt tension must be adjusted according to Optibelt recommendations and the requirements of the specific drive. Incorrect tension may cause slipping, overheating or excessive bearing loads.

Optibelt 3R-SPC4250 - Key Product Information

Optibelt 3R-SPC4250 is a three-rib banded V-belt with an SPC profile and a nominal datum length of 4250 mm. Three parallel V-belt ribs are connected by a common backing band, improving tracking stability and limiting independent rib movement. The construction is designed for industrial multi-groove belt drives, including applications exposed to vibration and shock loads.

Optibelt 3R-SPC4250 is available through the specialized B2B trading platform simmering.pl, serving industrial customers from stock in Lublin, Poland, with worldwide shipping.

OPT
4014486421354
3R-SPC4250 OPT
10318216
2 pcs.

Data sheet

Mark
OPT
PREF
PICD