- New
Optibelt 4R-SPB3550 is a four-rib banded V-belt with an SPB profile and nominal datum length of 3550 mm. Four parallel ribs connected by a common backing band provide improved tracking stability in multi-groove belt drives. Designed for industrial power transmission systems, including applications exposed to vibration and shock loads. Available through the specialized B2B trading platform simmering.pl, with stock in Lublin, Poland, and worldwide shipping.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
Optibelt |
|
Complete designation |
4R-SPB3550 |
|
Product type |
Banded V-belt |
|
Product family |
Optibelt KB |
|
Belt profile |
SPB |
|
Number of ribs |
4 |
|
Datum length Ld |
3550 mm |
|
Nominal width of individual SPB profile |
16.3 mm |
|
Nominal height of SPB profile |
13 mm |
|
Nominal individual rib cross-section |
16.3x13 mm |
|
Construction |
Four V-belt ribs joined by a common backing band |
|
Power transmission method |
Friction drive |
|
Compatible pulleys |
Multi-groove pulleys suitable for banded SPB belts |
The designation identifies a four-rib banded configuration with a nominal datum length of 3550 mm.
The overall belt width depends on the rib spacing and the specific banded construction. It should not be calculated simply by multiplying the nominal width of one rib by four.
The designation identifies the number of ribs, belt profile and nominal length.
Optibelt - Manufacturer of industrial power transmission components.
4R - Four parallel V-belt ribs connected into one banded belt.
SPB - Narrow-section V-belt profile with a nominal cross-section of 16.3x13 mm.
3550 - Nominal datum length of 3550 mm.
The SPB designation defines the cross-sectional profile, while 4R specifies the four-rib banded configuration.
The designation does not independently confirm a particular rubber compound, tensile cord material or special operating-temperature execution.
These characteristics must be verified against the manufacturer's documentation for the exact product version.
Common written variations include:
Optibelt 4R-SPB3550
4R-SPB3550 Optibelt
Optibelt 4-SPB3550
Optibelt 4/SPB3550
4 SPB 3550 Optibelt
Optibelt KB SPB3550 4-rib
Optibelt SPB 3550 banded V-belt
The alternative forms 4-SPB3550 and 4/SPB3550 may appear in distributor listings.
However, these variations should not automatically be treated as manufacturer-confirmed equivalent part numbers.
The exact product family and execution must be checked before ordering.
No unverified OEM references or cross-manufacturer replacement numbers have been assigned.
Optibelt 4R-SPB3550 consists of four parallel V-belt ribs with trapezoidal cross-sections.
Each rib engages with a corresponding groove in the pulley.
The ribs are connected by a common backing band, creating a single power transmission component.
This construction helps maintain the relative position of the ribs during operation.
Compared with four independent V-belts, a banded belt provides improved lateral stability and reduces the risk of individual belts twisting or rolling over in pulley grooves.
These characteristics are particularly relevant in drives exposed to:
Shock loads.
Mechanical vibration.
Fluctuating torque.
Long centre distances.
Operating conditions that may cause individual belts to oscillate.
Torque is transmitted through friction between the sidewalls of the belt ribs and the pulley groove surfaces.
The backing band connects the ribs mechanically but does not replace the requirement for correct pulley alignment and belt tension.
|
Feature |
4R-SPB3550 |
Four individual SPB3550 belts |
|---|---|---|
|
Number of ribs or belts |
4 |
4 |
|
Belt profile |
SPB |
SPB |
|
Datum length |
3550 mm |
3550 mm per belt |
|
Rib connection |
Common backing band |
Independent belts |
|
Lateral stability |
Banded construction |
Depends on individual belt behaviour |
|
Resistance to belt twisting |
Improved by connected ribs |
Depends on drive conditions |
|
Installation |
One banded belt |
Four separate belts |
|
Pulley requirements |
Suitable for banded SPB belts |
Suitable for individual SPB belts |
A four-rib banded belt must not automatically be replaced with four separate SPB3550 V-belts.
Although the nominal profile and length may match, the drive characteristics differ.
The pulley groove spacing, belt tensioning arrangement and machine manufacturer's requirements must be verified before making a substitution.
Before purchasing Optibelt 4R-SPB3550, verify the following:
Complete manufacturer designation 4R-SPB3550.
Narrow-section SPB profile.
Number of ribs: 4.
Datum length Ld: 3550 mm.
Pulley groove geometry.
Centre-to-centre spacing of pulley grooves.
Available installation width.
Centre distance between pulleys.
Belt tension adjustment range.
Rotational speed.
Required transmitted power.
Shock loads and vibration levels.
Operating temperature.
Environmental conditions.
Compatibility with the existing belt drive.
A banded V-belt with the same nominal length but a different profile or number of ribs is not a direct replacement.
The overall width of the banded belt and the spacing between ribs must also match the pulley arrangement.
Matching the nominal length alone does not guarantee interchangeability.
Banded SPB V-belts are used in industrial power transmission systems, particularly where vibration, shock loads or unstable belt tracking may affect individual V-belts.
Typical applications of this belt construction include:
Industrial machinery with multi-groove belt drives.
Drives with relatively long centre distances.
Equipment exposed to fluctuating loads.
Manufacturing and processing machinery.
Material handling equipment.
Belt transmissions requiring stable tracking of multiple ribs.
These are typical applications of banded SPB V-belts, not confirmed OEM applications of the exact Optibelt 4R-SPB3550 designation.
Suitability for a particular machine must be established from the drive design and operating parameters.
Before installation, inspect the pulleys for wear, damage and contamination.
Check that the pulley grooves have the correct SPB geometry and spacing for the banded belt.
Verify pulley alignment before installing the belt.
The belt should be installed after releasing the tensioning mechanism or reducing the centre distance.
Do not force the belt over pulley edges using screwdrivers or other tools.
After installation, adjust belt tension according to Optibelt recommendations and the drive specifications.
Insufficient tension may cause slipping, overheating and accelerated wear.
Excessive tension can increase radial loads on shafts and bearings.
During operation, regularly inspect:
Rib sidewalls for wear.
The common backing band for cracks or damage.
Belt tracking and alignment.
Signs of slipping.
Unusual vibration.
Pulley groove condition.
Store the belt in a clean, dry environment away from direct sunlight, excessive heat and substances that may damage elastomeric materials.
Optibelt 4R-SPB3550 is a four-rib banded V-belt. It consists of four narrow-section SPB V-belt ribs connected by a common backing band and is designed for industrial belt drive systems.
The nominal datum length Ld is 3550 mm. This value must not be confused with the belt's inside or outside length.
The designation 4R indicates four parallel V-belt ribs connected into one banded power transmission belt.
The nominal cross-section of an individual SPB V-belt is approximately 16.3x13 mm. The total width of the banded belt depends on the rib spacing and backing construction.
Not without verifying the drive design. The banded construction provides improved lateral stability and reduces the risk of individual belts twisting in pulley grooves, particularly under vibration and shock loads.
No. SPB and SPC are different V-belt profiles with different cross-sectional geometries. The belt requires pulleys suitable for its SPB profile and banded construction.
Optibelt banded V-belts are commonly used in industrial drives exposed to shock loads, vibration, long centre distances and operating conditions requiring stable belt tracking.
Yes. Belt tension must be adjusted according to Optibelt recommendations and the specific drive requirements. Correct tension is essential for efficient power transmission and to prevent excessive loads on shafts and bearings.
Optibelt 4R-SPB3550 is a four-rib banded V-belt with an SPB profile and nominal datum length of 3550 mm. Four parallel V-belt ribs are connected by a common backing band, improving tracking stability and reducing belt twisting. The construction is suitable for industrial power transmission systems exposed to vibration, fluctuating torque and shock loads.
Optibelt 4R-SPB3550 is available through the specialized B2B trading platform simmering.pl, serving industrial customers from stock in Lublin, Poland, with worldwide shipping.