CORTECO 01036821 ACM B1BASLRS 32x47x8 mm - Radial Shaft Oil Seal Simmerring

CORTECO 01036821 ACM B1BASLRS 32x47x8 mm - Radial Shaft Oil Seal Simmerring

CORTECO 01036821 ACM B1BASLRS 32x47x8 mm is a radial shaft oil seal from the Simmerring family, manufactured from ACM polyacrylate rubber. It has a 32 mm inside diameter, 47 mm outside diameter and 8 mm width. The B1BASLRS designation identifies the specific construction variant and should be considered together with the material and dimensions when selecting a replacement.

Technical data - CORTECO 01036821

What does CORTECO 01036821 ACM B1BASLRS mean?

The complete product designation is:

CORTECO 01036821 ACM B1BASLRS 32x47x8 mm

This provides more precise identification than the dimensions alone.

CORTECO - manufacturer of the sealing component.

01036821 - CORTECO product identification number.

ACM - elastomer material used for the seal: polyacrylate rubber.

B1BASLRS - profile designation identifying this specific construction variant.

32x47x8 mm - nominal seal dimensions: shaft diameter x housing diameter x width.

When selecting a replacement, the complete product designation should be considered rather than relying only on the 32x47x8 mm dimensions.

Dimensions of CORTECO 01036821

The dimensions are:

32x47x8 mm

where:

• d = 32 mm - inside diameter
• D = 47 mm - outside diameter
• B = 8 mm - width

The inside diameter corresponds to the nominal shaft diameter at the sealing surface.

The outside diameter corresponds to the nominal seal housing diameter.

The 8 mm value defines the axial width of the seal.

ACM - Polyacrylate Rubber

CORTECO 01036821 is manufactured from:

ACM - Polyacrylate Rubber

ACM elastomers are used in technical sealing applications including automotive transmissions and drivetrain systems where compatibility with the specified lubricants and operating conditions is required.

When evaluating this seal for a particular application, consider:

• lubricant or operating medium
• operating temperature
• shaft speed
• shaft surface condition
• lubrication conditions
• housing design
• equipment or vehicle manufacturer requirements

A specific temperature range should not be assigned to CORTECO 01036821 solely from generic ACM material data. Actual operating limits depend on the specific elastomer compound and application.

B1BASLRS construction

The construction designation for this product is:

B1BASLRS

This code forms an important part of the technical identification of the seal.

When evaluating an alternative, the following should be considered together:

CORTECO 01036821 + ACM + B1BASLRS + 32x47x8 mm

A different 32x47x8 mm Simmerring with another construction profile should not automatically be considered technically equivalent.

Individual elements of the B1BASLRS code should not be assigned detailed meanings unless those meanings are explicitly confirmed by manufacturer documentation for this exact product.

Why are the 32x47x8 mm dimensions alone not enough?

Dimensions are fundamental when identifying a radial shaft oil seal, but they do not define its complete construction.

Two seals can have exactly the same:

32x47x8 mm

dimensions while differing in:

• elastomer material
• sealing profile
• sealing lip geometry
• outside surface construction
• auxiliary sealing features
• operating characteristics
• intended application

For this reason, CORTECO 01036821 should primarily be identified using its exact product number and B1BASLRS construction designation.

Alternative designations and search references

Useful identification variants include:

• CORTECO 01036821
• 01036821 CORTECO
• CORTECO 01036821 ACM
• CORTECO 01036821 B1BASLRS
• CORTECO 01036821 ACM B1BASLRS
• CORTECO 01036821 32x47x8
• CORTECO B1BASLRS 32x47x8
• CORTECO Simmerring 32x47x8
• ACM Simmerring 32x47x8
• ACM oil seal 32x47x8
• radial shaft oil seal 32x47x8
• CORTECO oil seal 32x47x8

The primary technical identification remains:

CORTECO 01036821

CORTECO 01036821 vs a standard 32x47x8 mm oil seal

CORTECO 01036821 should not automatically be replaced by any radial shaft seal with dimensions:

32x47x8 mm

Before using an alternative product, compare:

• 32 mm inside diameter
• 47 mm outside diameter
• 8 mm width
• ACM material
• B1BASLRS profile
• seal construction
• operating conditions
• installation position
• equipment manufacturer requirements

Identical dimensions do not by themselves confirm full technical interchangeability.

How to select CORTECO 01036821 correctly

The safest starting point is the exact product number:

CORTECO 01036821

Then verify:

1. 32x47x8 mm dimensions
2. ACM material
3. B1BASLRS profile
4. intended application
5. installation position
6. operating medium
7. requirements of the specific assembly

If the seal is being identified from a removed component, record all visible markings on the original seal and compare them with the technical documentation for the equipment.

Selection and interchangeability checklist

Before ordering, check:

• manufacturer: CORTECO
• product number: 01036821
• inside diameter: 32 mm
• outside diameter: 47 mm
• width: 8 mm
• material: ACM
• profile: B1BASLRS
• installation position
• operating medium
• requirements of the specific application

Where there is any uncertainty, the exact catalogue number and documentation for the specific assembly should take priority over selection based only on dimensions.

Installation of CORTECO 01036821

Before installing the new seal, thoroughly clean the housing and mating shaft surface.

Inspect for:

• shaft wear grooves
• scratches
• burrs
• corrosion
• housing damage
• misalignment
• excessive shaft play

The seal should be installed evenly and squarely using a suitable fitting tool.

The functional sealing area must not be folded, cut or damaged when passing over shaft edges, splines or other sharp features.

What should be checked if the previous oil seal was leaking?

Oil leakage does not always mean that the radial shaft seal itself was the only cause of the problem.

Before installing CORTECO 01036821, check:

• shaft sealing surface
• shaft runout
• bearing play
• bearing condition
• alignment
• seal housing
• lubricant level
• correct lubricant specification
• operating conditions of the assembly

If the shaft has a pronounced wear groove, a new Simmerring may begin leaking again even when it has been installed correctly.

FAQ - CORTECO 01036821

What are the dimensions of CORTECO 01036821?

CORTECO 01036821 has dimensions of 32x47x8 mm: 32 mm inside diameter, 47 mm outside diameter and 8 mm width.

What material is CORTECO 01036821 made from?

The seal is manufactured from ACM, or polyacrylate rubber.

What is the profile of CORTECO 01036821?

The construction designation supplied for this product is B1BASLRS.

Is CORTECO 01036821 a Simmerring?

Yes. It is a radial shaft oil seal from the Simmerring product family.

Can CORTECO 01036821 be replaced by any 32x47x8 mm oil seal?

No automatic interchangeability should be assumed. The ACM material, B1BASLRS profile and requirements of the specific application must also be considered.

Are ACM and NBR the same material?

No. ACM and NBR are different elastomer families with different material properties. A change of material should be based on the requirements of the specific application rather than dimensions alone.

What is most important when selecting an equivalent seal?

Compare the exact CORTECO reference, dimensions, material, construction profile, operating medium and installation requirements.

CORTECO 01036821 ACM B1BASLRS 32x47x8 mm - key information

CORTECO 01036821 is an ACM polyacrylate radial shaft oil seal with dimensions of 32x47x8 mm. The specific version is identified by the B1BASLRS construction designation. When selecting an equivalent, dimensions alone are insufficient; material, sealing profile, installation position and operating requirements should also be verified.

Availability from simmering.pl

CORTECO 01036821 ACM B1BASLRS 32x47x8 mm is available from simmering.pl for industrial maintenance, repair specialists, technical procurement, workshops, distributors and B2B customers.

Products are supplied from stock in Poland, with worldwide shipping available. simmering.pl specialises in CORTECO Simmerring radial shaft seals, technical sealing solutions and bearings, with support for product identification by manufacturer number, material, construction and dimensions.