CORTECO 01037067 FPM BASLX7 55x68x8 mm - Radial Shaft Oil Seal

CORTECO 01037067 FPM BASLX7 55x68x8 mm - Radial Shaft Oil Seal Simmerring

CORTECO 01037067 FPM BASLX7 55x68x8 mm is a radial shaft oil seal from the Simmerring family, manufactured from FPM fluoroelastomer. It has a 55 mm inside diameter, 68 mm outside diameter and 8 mm width. The BASLX7 version incorporates an additional dust lip. The product is also referenced as CORTECO 01037067B and 82037067, with JCB 904M3206 as a confirmed OE cross-reference.

Technical data - CORTECO 01037067

What does CORTECO 01037067 FPM BASLX7 mean?

The complete product identification is:

CORTECO 01037067 FPM BASLX7 55x68x8 mm

Each element is important when identifying the exact seal.

CORTECO - manufacturer of the sealing component.

01037067 - base CORTECO product number.

01037067B - reference format commonly used in aftermarket catalogues.

82037067 - additional CORTECO reference associated with this product.

FPM - designation for the fluoroelastomer used as the sealing material.

BASLX7 - profile designation for this specific Simmerring version.

55x68x8 mm - complete dimensional specification.

Catalogue data for this exact product also confirms an additional dust lip.

Dimensions of CORTECO 01037067

The exact dimensions are:

55x68x8 mm

where:

• d = 55 mm - inside diameter
• D = 68 mm - outside diameter
• B = 8 mm - width

Dimensions are essential for identification, but they are not the only criterion for interchangeability.

Other radial shaft oil seals with the same 55x68x8 mm dimensions may differ in:

• sealing profile
• elastomer material
• number of sealing lips
• outside surface construction
• sealing lip geometry
• intended application

A dimensional match alone therefore does not establish full interchangeability with CORTECO 01037067.

FPM fluoroelastomer

CORTECO 01037067 is manufactured from:

FPM - fluoroelastomer

FPM is a European material designation used for fluoroelastomers. FKM is another designation commonly encountered internationally for this elastomer family.

FPM/FKM materials are widely used for technical radial shaft seals where resistance to many oils, lubricants and elevated operating temperatures is required.

The exact suitability of CORTECO 01037067 must nevertheless be assessed according to the actual application, including:

• lubricant or medium
• operating temperature
• shaft surface speed
• shaft condition
• lubrication conditions
• housing design
• equipment manufacturer requirements

A specific operating temperature range is not stated here because it should not be derived solely from generic FPM material properties without data for the exact CORTECO compound.

FPM/FKM should also not automatically be described as Viton. Viton is a specific trademark, while FPM and FKM identify the general fluoroelastomer family.

BASLX7 construction

For CORTECO 01037067B, current catalogue data identifies the profile as:

BASLX7

This profile designation is part of the exact technical identity of the product.

Confirmed characteristics include:

• 55x68x8 mm dimensions
• FPM material
• BASLX7 profile
• additional dust lip

The complete profile should therefore be considered when selecting an equivalent seal.

A different CORTECO profile with identical dimensions should not automatically be considered interchangeable with BASLX7.

Additional dust lip

CORTECO 01037067 incorporates an:

additional dust lip

The supplementary lip helps protect the primary sealing area against contamination entering from the external side.

Depending on the installation environment, this may include:

• dust
• dirt
• moisture
• mud
• operating contamination

The dust lip performs a different function from the primary sealing lip responsible for retaining lubricant.

Its presence is therefore a relevant construction feature when comparing replacement seals.

CORTECO 01037067 vs JCB 904M3206

A confirmed OE cross-reference for CORTECO 01037067B is:

JCB 904M3206

The reference may also be written as:

JCB 904/M3206

The relationship:

CORTECO 01037067B

JCB 904M3206

provides a more precise identification method than searching only for a 55x68x8 mm radial shaft seal.

Application catalogues associate this reference with transmission sealing in specified JCB machinery.

JCB applications

Application data for JCB 904M3206 associates CORTECO 01037067B with transmission applications in specified JCB machines.

Catalogue references include selected configurations within the:

• JCB 3CX family
• JCB 4CX family

The seal is also associated in specialist parts data with specified:

Synchro Shuttle

transmission configurations, including references to:

SS750

These are application-specific catalogue references.

They do not mean that CORTECO 01037067 fits every JCB 3CX or JCB 4CX machine.

Compatibility should be confirmed using:

JCB 904M3206 + transmission type + installation position

Alternative designations and reference numbers

Useful identification variants include:

• CORTECO 01037067
• CORTECO 01037067B
• 01037067 CORTECO
• 01037067B CORTECO
• CORTECO 82037067
• CORTECO 01037067 FPM
• CORTECO 01037067 BASLX7
• CORTECO 01037067 FPM BASLX7
• CORTECO BASLX7 55x68x8
• CORTECO 01037067 55x68x8
• CORTECO 01037067B 55x68x8
• CORTECO Simmerring 55x68x8
• FPM oil seal 55x68x8
• FKM oil seal 55x68x8
• JCB 904M3206
• JCB 904/M3206
• JCB gearbox oil seal 55x68x8

Confirmed references:

CORTECO

• 01037067
• 01037067B
• 82037067

JCB

• 904M3206
• 904/M3206

CORTECO 01037067 vs other 55x68x8 mm oil seals

Not every radial shaft oil seal with dimensions:

55x68x8 mm

is technically equivalent to CORTECO 01037067.

When comparing another seal, verify:

• 55 mm inside diameter
• 68 mm outside diameter
• 8 mm width
• FPM material
• BASLX7 profile
• additional dust lip
• OE cross-reference
• installation requirements

The combination:

FPM + BASLX7 + 55x68x8 mm

provides more precise identification than dimensions alone.

Identical dimensions do not automatically mean identical construction or full technical interchangeability.

BASLX7 vs other CORTECO profiles

CORTECO offers radial shaft seals with similar or identical basic dimensions but different profile designations.

These different profile codes should not automatically be treated as equivalent.

For CORTECO 01037067, the relevant designation is:

BASLX7

When replacing the seal, use the exact CORTECO product number and profile rather than assuming that another 55x68x8 mm CORTECO seal has the same construction.

How to select CORTECO 01037067 correctly

The safest starting point is identification by:

CORTECO 01037067 / 01037067B

or the confirmed OE reference:

JCB 904M3206

Then verify:

• 55x68x8 mm dimensions
• FPM material
• BASLX7 profile
• additional dust lip
• transmission type
• exact installation position

If the seal is being identified from a removed component, all visible markings should be recorded and compared with the technical documentation for the machine or transmission.

Selection and interchangeability checklist

Before ordering CORTECO 01037067, check:

• CORTECO 01037067 / 01037067B
• JCB 904M3206, where applicable
• inside diameter 55 mm
• outside diameter 68 mm
• width 8 mm
• FPM material
• BASLX7 profile
• additional dust lip
• transmission configuration
• installation position

Identical 55x68x8 mm dimensions do not guarantee full technical interchangeability.

Installation of CORTECO 01037067

Before installation, clean the seal housing and mating shaft surface thoroughly.

Inspect:

• shaft surface
• wear grooves
• scratches
• burrs
• corrosion
• housing condition
• alignment
• excessive shaft play

During installation, protect both the primary sealing lip and the additional dust lip against folding, cutting or other mechanical damage.

The seal should be pressed evenly and squarely into its housing using an appropriate installation tool.

Installation force should not be applied directly to the functional sealing lips.

What should be checked if the seal leaks again?

If the previous seal failed prematurely, inspect the surrounding components before installing a new CORTECO 01037067.

Check:

• shaft sealing surface
• shaft runout
• bearing play
• bearing condition
• alignment
• seal housing
• lubricant level
• correct lubricant specification
• transmission operating conditions

Replacing the radial shaft seal alone may not solve a leakage problem if the actual cause is shaft wear, excessive play or another mechanical fault.

FAQ - CORTECO 01037067

What are the dimensions of CORTECO 01037067?

CORTECO 01037067B has dimensions of 55x68x8 mm: 55 mm inside diameter, 68 mm outside diameter and 8 mm width.

What material is CORTECO 01037067 made from?

The seal is manufactured from FPM fluoroelastomer.

Is FPM the same as FKM?

FPM and FKM are designations used for the fluoroelastomer material family. They should not automatically be interpreted as the Viton trademark.

What is the profile of CORTECO 01037067?

Catalogue data for CORTECO 01037067B identifies the profile as BASLX7.

Does CORTECO 01037067 have a dust lip?

Yes. Catalogue data confirms an additional dust lip.

Are CORTECO 01037067 and 01037067B the same product?

01037067 is the base product reference, while 01037067B is the reference format widely used for the same product in aftermarket catalogue systems.

Which JCB number corresponds to CORTECO 01037067B?

The confirmed JCB reference is 904M3206, also commonly written as 904/M3206.

Can any 55x68x8 mm oil seal replace CORTECO 01037067?

No automatic interchangeability should be assumed. In addition to the 55x68x8 mm dimensions, the FPM material, BASLX7 profile, additional dust lip, OE reference and application requirements should be checked.

CORTECO 01037067 FPM BASLX7 55x68x8 mm - key information

CORTECO 01037067 is an FPM radial shaft oil seal with BASLX7 construction and 55x68x8 mm dimensions. It incorporates an additional dust lip and is also referenced as 01037067B and 82037067. The confirmed JCB cross-reference is 904M3206, associated with specified transmission sealing applications.

Availability from simmering.pl

CORTECO 01037067 FPM BASLX7 55x68x8 mm is available from simmering.pl for machinery repair specialists, transmission services, industrial maintenance, technical procurement, distributors and B2B customers.

Products are supplied from stock in Poland, with worldwide shipping available. simmering.pl specialises in CORTECO Simmerring radial shaft seals, technical sealing solutions and bearings, with support for identification by manufacturer number, OE reference, construction and dimensions.