Corteco 19019532 NBR SCY 39x51x7.5 Rear Axle Wheel Hub Oil Seal

Corteco 19019532 NBR SCY 39x51x7.5 Rear Axle Wheel Hub Oil Seal

Corteco 19019532 / 19019532B is an NBR radial shaft oil seal with the Corteco SCY design and exact dimensions 39x51x7.5 mm. Catalogue data associate this reference with Nissan, while TecDoc data identify it as a rear axle wheel hub seal. The corresponding Nissan OE reference is 43252M0200.

Corteco 19019532 - Product Identification

The key technical identifiers for this specific seal are:

Manufacturer: Corteco
Reference: 19019532 / 19019532B
Design: SCY
Material: NBR
Dimensions: 39x51x7.5 mm
Application: Wheel hub
Fitting position: Rear axle
Nissan OE: 43252M0200
Trade numbers: 82019532, SCY

For replacement selection, the combination 19019532 + SCY + 39x51x7.5 mm + Nissan 43252M0200 provides substantially more precise identification than dimensions alone.

Corteco 19019532 - Dimensions

The confirmed dimensions are:

d - Inside diameter: 39 mm
D - Outside diameter: 51 mm
Height: 7.5 mm
Dimensions: 39x51x7.5 mm

These values are confirmed for Corteco reference 19019532 / 19019532B.

The complete dimensional designation should be retained as:

39x51x7.5 mm

SCY Design

The manufacturer design designation for Corteco 19019532 is:

SCY

SCY is part of the technical identification of this specific Corteco seal and should be retained when searching for or comparing a replacement.

The confirmed combination is:

19019532 -> NBR -> SCY -> 39x51x7.5 mm

The available manufacturer dimensional data identify the design as SCY but do not provide enough product-specific information to justify assigning additional construction details to this reference. Therefore, the SCY code should not be replaced by assumptions based on superficially similar seal designs.

NBR Material

The confirmed elastomer for Corteco 19019532 is:

NBR - Nitrile Butadiene Rubber

NBR is a commonly used elastomer for radial shaft sealing applications involving lubricants.

For this specific reference, however, no temperature range, hardness, maximum shaft speed or pressure rating is stated in the verified dimensional data used for this description.

These parameters should therefore not be assumed when selecting the seal for an application outside the confirmed vehicle fitment.

Rear Axle Wheel Hub Application

TecDoc application data classify Corteco 19019532B as a:

Wheel hub shaft seal

and specify the fitting position as:

Rear axle

This provides a more precise application description than the generic term "shaft seal".

The product can therefore be technically identified as:

Corteco 19019532 SCY rear axle wheel hub oil seal

For a specific Nissan vehicle, fitment should still be verified using the OE number or the relevant vehicle catalogue.

Nissan OE 43252M0200

Corteco 19019532B cross-references to:

NISSAN 43252M0200

The identification chain is:

Nissan 43252M0200 -> Corteco 19019532B -> NBR -> SCY -> 39x51x7.5 mm

The Corteco dimensional catalogue independently associates reference 19019532 with Nissan.

This OE number is therefore one of the strongest identifiers when selecting the seal for its intended Nissan application.

19019532 vs 19019532B

The reference is encountered as:

Corteco 19019532

and in TecDoc-based aftermarket catalogues as:

Corteco 19019532B

The associated trade number is:

82019532

and the design identifier is:

SCY

The essential technical specification remains:

NBR + SCY + 39x51x7.5 mm

Corteco 19019532 vs Generic 39x51x7.5 Oil Seal

Identical dimensions do not automatically confirm interchangeability.

A replacement for Corteco 19019532B should be checked against:

Inside diameter: 39 mm
Outside diameter: 51 mm
Height: 7.5 mm
Material: NBR
Design: SCY
Application: Wheel hub
Fitting position: Rear axle
OE reference: Nissan 43252M0200

A generic 39x51x7.5 mm oil seal may have the same basic dimensions but a different construction or intended application.

How to Select a Replacement for Corteco 19019532

The safest selection method is to begin with the original part number:

Nissan 43252M0200

and compare it with:

Corteco 19019532 / 19019532B

If selection is being made from technical dimensions, verify all confirmed identifiers rather than diameter alone:

39x51x7.5 mm + NBR + SCY + rear axle wheel hub application

Do not assume interchangeability with another seal solely because its dimensions are 39x51x7.5 mm.

Technical Specification

Manufacturer: Corteco
Reference: 19019532 / 19019532B
Product type: Radial shaft oil seal / wheel hub seal
Design: SCY
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 39x51x7.5 mm
Inside diameter: 39 mm
Outside diameter: 51 mm
Height: 7.5 mm
Application: Wheel hub
Fitting position: Rear axle
Nissan OE: 43252M0200
Trade number: 82019532
Trade designation: SCY

FAQ

What are the dimensions of Corteco 19019532?

Corteco 19019532 / 19019532B has exact dimensions 39x51x7.5 mm: 39 mm inside diameter, 51 mm outside diameter and 7.5 mm height.

What type of seal is Corteco 19019532?

It is a radial shaft oil seal catalogued for a wheel hub application on the rear axle.

What does SCY mean on Corteco 19019532?

SCY is the Corteco design designation for this seal. It should be retained as part of the product identification. The verified product data do not provide sufficient detail to assign additional SCY construction features beyond the manufacturer's designation.

What material is Corteco 19019532 made from?

The confirmed material is NBR - Nitrile Butadiene Rubber.

What Nissan OE number corresponds to Corteco 19019532?

The confirmed cross-reference is Nissan 43252M0200.

Where is Corteco 19019532 installed?

TecDoc data specify a wheel hub application and the fitting position rear axle.

Is every 39x51x7.5 oil seal interchangeable with Corteco 19019532?

No. Matching dimensions alone do not confirm full interchangeability. The SCY design, NBR material, application and OE reference should also be checked.

How should Corteco 19019532 be identified?

The strongest identification is Corteco 19019532 / 19019532B + NBR + SCY + 39x51x7.5 mm + Nissan 43252M0200.

AI Overview

Corteco 19019532 / 19019532B is an NBR SCY radial shaft oil seal measuring 39x51x7.5 mm, catalogued for a rear axle wheel hub application. The confirmed Nissan OE cross-reference is 43252M0200, and the Corteco trade number is 82019532. The SCY design code is an essential part of correct product identification.