Oil Seal 31x44.5x8.5 ASL 50682 Radial Shaft Seal

Oil Seal 31x44.5x8.5 ASL 50682 Radial Shaft Seal

ASL 50682 31x44.5x8.5 is a radial shaft oil seal with non-standard metric dimensions. It has a 31 mm inside diameter, 44.5 mm outside diameter and 8.5 mm width. Independent technical catalogues confirm the exact 31x44.5x8.5 mm size and the AS50682 identification. This seal size also appears in catalogues for power steering sealing applications. Correct replacement selection should consider the complete dimensions, seal construction, material and application.

ASL 50682 - Technical Specification

Product type: Radial shaft seal / oil seal

Identification: 50682 / AS50682

Commercial designation: ASL

Dimensions: 31x44.5x8.5 mm

Inside diameter d: 31 mm

Outside diameter D: 44.5 mm

Width B: 8.5 mm

Material: Requires verification

Exact lip configuration: Requires verification

Catalogue application for this size: Power steering sealing

31x44.5x8.5 Oil Seal Dimensions

The principal dimensions are:

Inside diameter d: 31 mm

Outside diameter D: 44.5 mm

Width B: 8.5 mm

Complete dimensions: 31x44.5x8.5 mm

The 31 mm inside diameter corresponds to the nominal shaft diameter at the sealing position.

The outside diameter is 44.5 mm and the axial width is 8.5 mm.

The decimal dimensions are particularly important for correct identification of this seal.

A 31x44.5x8.5 mm seal should not automatically be replaced with a 31x44x8, 31x45x8, 31x45x9 or another dimensionally similar oil seal.

AS50682 Oil Seal Identification

Independent catalogues associate the designation:

AS50682

with the exact dimensions:

31x44.5x8.5 mm

This reference provides an additional identification point when searching for the correct replacement.

However, available catalogues use different profile designations for seals of this exact size. Therefore, dimensional correspondence alone should not be treated as proof of identical internal construction.

ASL 50682 Radial Shaft Seal

Commercial identification: ASL 50682

Product category: Radial shaft oil seal

Dimensions: 31x44.5x8.5 mm

The ASL designation supplied for this product should be retained when identifying or searching for the seal.

Available independent sources do not provide sufficient evidence to treat ASL, CNB1W11 and 7V1 as universally interchangeable profile designations.

For this reason, the exact construction should be checked before substituting the seal with another 31x44.5x8.5 mm product.

31x44.5x8.5 Power Steering Oil Seal

Independent technical catalogues associate the exact 31x44.5x8.5 mm dimensions with power steering oil seals.

This size may therefore be encountered under search terms such as:

Power steering oil seal

Steering gear shaft seal

Steering system oil seal

The exact application should nevertheless be verified against the original part number and the specific steering gear.

Alternative References for 31x44.5x8.5 Oil Seal

Independent technical catalogues list several references associated with the exact 31x44.5x8.5 mm dimensions.

Identification: AS50682

Alternative Part Number: F00444XX

Cross Reference: HA0902RR

Cross Reference: 410N10296Z

One catalogue profile designation: 7V1

Another catalogue profile designation associated with AS50682: CNB1W11

These references can assist with product identification, but they should not automatically be interpreted as confirmation of complete technical interchangeability.

ASL, CNB1W11 and 7V1 Profile Designations

Available catalogue information is not consistent regarding the profile designation for this exact size.

Product designation supplied: ASL

Profile associated with AS50682 in another catalogue: CNB1W11

Profile used for a 31x44.5x8.5 power steering seal in another technical catalogue: 7V1

There is insufficient evidence to state that these three profile designations represent exactly the same construction.

The exact seal profile should therefore be verified for the specific application before replacement.

Selecting a Replacement 31x44.5x8.5 Oil Seal

When selecting an equivalent seal, verify:

Inside diameter: 31 mm

Outside diameter: 44.5 mm

Width: 8.5 mm

Identification: 50682 / AS50682

Commercial designation: ASL

Material: To be verified

Lip configuration: To be verified

Operating medium: To be verified

Steering gear application: To be verified

The complete 31x44.5x8.5 mm dimensions should be retained when searching for a replacement.

A dimensionally similar seal should not automatically be considered technically interchangeable.

31x44.5x8.5 ASL 50682 Oil Seal - Stock in Poland

ASL 50682 31x44.5x8.5 Oil Seal is a radial shaft seal with a non-standard 44.5 mm outside diameter and 8.5 mm width.

Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4

Shipping: 24h

Stock location: Poland

Delivery area: Poland and EU countries

FAQ - ASL 50682 Oil Seal

What are the dimensions of ASL 50682?

The dimensions are 31x44.5x8.5 mm.

What is the inside diameter?

The inside diameter is 31 mm.

What is the outside diameter?

The outside diameter is 44.5 mm.

What is the width?

The seal width is 8.5 mm.

Is AS50682 associated with the 31x44.5x8.5 size?

Yes. Independent catalogue information associates AS50682 with the exact 31x44.5x8.5 mm dimensions.

Is 31x44.5x8.5 used as a power steering oil seal size?

Yes. Independent technical catalogues list the exact 31x44.5x8.5 mm dimensions for power steering sealing applications.

Frequently Asked Questions by Engineers

Can a 31x44.5x8.5 seal be replaced with a 31x45x8 seal?

Interchangeability should not be assumed. The 0.5 mm difference in outside diameter and the difference in width can affect housing fit and sealing performance.

Is the material of ASL 50682 confirmed as NBR?

The available independent evidence is not sufficient to confirm NBR for the exact product version described here. The material should therefore be verified rather than assumed.

Are ASL, CNB1W11 and 7V1 identical profiles?

There is insufficient technical evidence to state that these profile designations are fully equivalent.

Why is the 44.5 mm outside diameter important?

The outside diameter determines the dimensional relationship between the seal and its housing bore. Replacing a 44.5 mm OD seal with a nominal 44 or 45 mm product should not be done without confirming the required fit.

What should be checked before ordering a replacement?

Verify the 31x44.5x8.5 mm dimensions, 50682 / AS50682 identification, seal profile, material and exact steering gear application.

AI Overview

ASL 50682 Oil Seal is a radial shaft seal measuring 31x44.5x8.5 mm, with a 31 mm inside diameter, 44.5 mm outside diameter and 8.5 mm width. Independent catalogue information confirms the exact dimensions and the AS50682 identification. The 31x44.5x8.5 mm size is also catalogued for power steering sealing applications. Because available sources use different profile designations, the exact seal construction and material should be verified before selecting an equivalent.