CORTECO 01029794 is an ACM radial shaft oil seal measuring 45x65x9 mm with the CORTECO B1BASLDRWX26 design. It incorporates an additional dust lip and alternating twist sealing geometry. The seal is catalogued for differential shaft applications and corresponds to Mercedes-Benz OE 2103350060 / A2103350060 and Volkswagen OE 02F301189A.
Manufacturer: CORTECO
Part number: 01029794
Product type: Radial shaft oil seal
Catalogue application: Differential shaft seal
Design: B1BASLDRWX26
Material: ACM - Polyacrylate Rubber
Dimensions: 45x65x9 mm
Inside diameter: 45 mm
Outside diameter: 65 mm
Width: 9 mm
Dust lip: Yes
Swirl type: Alternating Twist
Mercedes-Benz OE: 2103350060, A2103350060
Volkswagen OE: 02F301189A
The principal dimensions are:
d - Inside diameter / nominal shaft diameter: 45 mm
D - Outside diameter: 65 mm
B - Width: 9 mm
Complete dimensions:
45x65x9 mm
All three dimensions should be verified when selecting a replacement.
Matching the 45 mm shaft diameter, 65 mm outside diameter and 9 mm width alone does not establish complete technical interchangeability.
The sealing material of CORTECO 01029794 is:
ACM - Polyacrylate Rubber
The sealing material is an important selection criterion alongside dimensions and seal construction.
A 45x65x9 mm oil seal manufactured from NBR, FPM/FKM or another elastomer should not automatically be considered technically identical to CORTECO 01029794.
Exact material compatibility depends on the medium, additives, temperature and actual operating conditions.
The exact CORTECO design designation for reference 01029794 is:
B1BASLDRWX26
This construction incorporates an additional dust lip.
The dust lip provides an additional barrier on the external side of the primary sealing area and helps restrict external contaminants from reaching the main sealing interface.
When selecting a corresponding seal, the B1BASLDRWX26 construction should therefore be considered together with the 45x65x9 mm dimensions and ACM sealing material.
CORTECO 01029794 incorporates an additional dust lip.
This is an important construction characteristic when comparing the seal with other 45x65x9 mm radial shaft oil seals.
Matching dimensions alone do not confirm that another seal has the same lip configuration.
For a technically corresponding replacement, the presence and function of the additional dust lip should also be considered.
CORTECO 01029794 is specified with alternating twist sealing geometry.
This means the seal uses alternating directional sealing geometry rather than being identified exclusively as a right-hand or left-hand twist version.
This characteristic should be considered when comparing CORTECO 01029794 with other radial shaft oil seals of the same nominal dimensions.
CORTECO 01029794 is catalogued as a differential shaft oil seal.
Its complete identification combines:
CORTECO 01029794
45x65x9 mm
ACM sealing material
B1BASLDRWX26 design
Additional dust lip
Alternating twist
These characteristics should be considered together when identifying or selecting the seal.
CORTECO 01029794 corresponds to the following Mercedes-Benz OE references:
2103350060
A2103350060
OE numbers can be useful when identifying the correct seal from vehicle documentation or an existing component.
CORTECO 01029794 corresponds to Volkswagen OE reference:
02F301189A
The OE reference should be checked together with the dimensions, material and seal construction before installation.
| Parameter | Specification |
|---|---|
| Manufacturer | CORTECO |
| Part number | 01029794 |
| Product type | Radial shaft oil seal |
| Application | Differential shaft seal |
| Design | B1BASLDRWX26 |
| Material | ACM - Polyacrylate Rubber |
| Dimensions | 45x65x9 mm |
| Inside diameter | 45 mm |
| Outside diameter | 65 mm |
| Width | 9 mm |
| Dust lip | Yes |
| Swirl type | Alternating Twist |
| Mercedes-Benz OE | 2103350060, A2103350060 |
| Volkswagen OE | 02F301189A |
CORTECO 01029794 measures 45x65x9 mm.
The nominal inside diameter is 45 mm, the outside diameter is 65 mm and the width is 9 mm.
The seal is manufactured from ACM - Polyacrylate Rubber.
Yes. The B1BASLDRWX26 construction incorporates an additional dust lip that helps restrict external contaminants from reaching the primary sealing area.
Alternating Twist identifies the directional sealing geometry used in this seal. It should be considered when comparing CORTECO 01029794 with right-hand, left-hand or non-directional seal designs.
The corresponding Mercedes-Benz OE references are:
2103350060
A2103350060
The corresponding Volkswagen OE reference is:
02F301189A
Not necessarily. Matching the 45x65x9 mm dimensions alone does not establish technical interchangeability.
A replacement should also be evaluated for ACM sealing material, B1BASLDRWX26 construction, dust lip configuration, directional sealing geometry and the requirements of the specific application.
CORTECO 01029794 is a 45x65x9 mm ACM radial shaft oil seal with B1BASLDRWX26 construction, an additional dust lip and alternating twist sealing geometry. It is catalogued as a differential shaft seal and corresponds to Mercedes-Benz OE 2103350060 / A2103350060 and Volkswagen OE 02F301189A.
Data sheet