CORTECO 01030093B 18x25x6 ACM B1SLX2 Radial Shaft Oil Seal

CORTECO 01030093B 18x25x6 ACM B1SLX2 Radial Shaft Oil Seal

CORTECO 01030093B, base reference 01030093, is a radial shaft oil seal with exact dimensions of 18x25x6 mm. The sealing material is ACM - Polyacrylate Rubber, and the exact CORTECO design designation is B1SLX2. The seal incorporates an additional dust lip and is cross-referenced with DEUTZ-FAHR OE numbers 04158766 and 02238056.

CORTECO 01030093B - Technical Specification

Manufacturer: CORTECO

Full reference: 01030093B

Base reference: 01030093

Trade Number: 82030093

Product type: Radial shaft oil seal

Design: B1SLX2

Material: ACM - Polyacrylate Rubber

Dimensions: 18x25x6 mm

Inside diameter d: 18 mm

Outside diameter D: 25 mm

Width B: 6 mm

Dust lip: Yes

DEUTZ-FAHR OE: 04158766

DEUTZ-FAHR OE: 02238056

CORTECO 01030093B Dimensions

The exact dimensions are:

d = 18 mm - inside diameter / nominal shaft diameter

D = 25 mm - outside diameter

B = 6 mm - width

Complete dimensions:

18x25x6 mm

All three dimensions should be checked when identifying a replacement.

Matching the nominal 18x25x6 mm dimensions alone does not establish complete technical interchangeability. The ACM sealing material, B1SLX2 design and dust lip configuration should also correspond to the requirements of the original application.

B1SLX2 Oil Seal Design

The exact CORTECO design designation associated with reference 01030093B is:

B1SLX2

The complete design code is an important identification parameter when comparing this product with other 18x25x6 mm radial shaft seals.

The product incorporates an additional dust lip.

When selecting an alternative seal, the B1SLX2 construction should be considered together with the dimensions and ACM sealing material.

Manufacturer-specific design codes should not be assumed to be identical solely because they appear to describe a similar seal construction.

Additional Dust Lip

CORTECO 01030093B incorporates an additional dust lip.

The secondary lip provides an additional barrier on the external side of the primary sealing area and helps reduce the ingress of contaminants such as:

Dust

Dirt

Fine particles

General environmental contamination

The presence of this additional lip is an important technical characteristic when comparing 01030093B with other 18x25x6 mm shaft seals.

ACM - Polyacrylate Rubber

The specified sealing material for CORTECO 01030093B is:

ACM - Polyacrylate Rubber

ACM is an elastomer used in radial shaft sealing applications, including applications involving compatible oils.

For this exact CORTECO reference, ACM forms part of the product specification.

An NBR, FPM or other elastomeric seal should therefore not automatically be considered an equivalent merely because it has the same 18x25x6 mm dimensions.

CORTECO 01030093B DEUTZ-FAHR

CORTECO 01030093B is cross-referenced with the following DEUTZ-FAHR OE numbers:

DEUTZ-FAHR 04158766

DEUTZ-FAHR 02238056

The same references may also appear in formatted versions such as:

0415 8766

0223 8056

For parts searches and database matching, the uninterrupted OE numbers:

04158766

and

02238056

are useful identification entities.

CORTECO 01030093B and 01030093

This product can be identified using several CORTECO references:

01030093B

01030093

82030093

B1SLX2

The complete product reference is:

01030093B

The reference:

01030093

is the base product number commonly encountered in catalogues and parts searches.

Trade Number:

82030093

provides an additional CORTECO product identifier.

CORTECO 01030093B Identification Numbers

Manufacturer: CORTECO

Full reference: 01030093B

Base reference: 01030093

Trade Number: 82030093

Design: B1SLX2

DEUTZ-FAHR OE: 04158766

DEUTZ-FAHR OE: 02238056

These references can be used together when identifying the seal in technical catalogues, purchasing systems and replacement-part searches.

How to Select CORTECO 01030093B

The principal parameters to verify are:

Reference - 01030093B

Dimensions - 18x25x6 mm

Material - ACM

Design - B1SLX2

Dust lip - Yes

Trade Number - 82030093

DEUTZ-FAHR OE - 04158766 / 02238056

When the seal is being selected for a particular machine or assembly, the OE reference and exact application should also be verified.

How to Measure an 18x25x6 Oil Seal

Three principal dimensions are used for basic radial shaft seal identification:

Inside diameter d

Outside diameter D

Width B

For CORTECO 01030093B:

d = 18 mm

D = 25 mm

B = 6 mm

A used elastomeric seal can be worn or deformed. If the original markings remain legible, the complete product reference should therefore be considered together with physical measurements.

Is Every 18x25x6 Oil Seal Interchangeable?

No.

Two radial shaft seals can have identical:

18x25x6 mm

dimensions but differ in:

Sealing material

Primary lip construction

Dust lip configuration

Outside diameter construction

Sealing geometry

Operating characteristics

For this reason, dimensions alone do not establish complete technical interchangeability.

CORTECO 01030093B Replacement Selection

When comparing CORTECO 01030093B with a seal from another manufacturer, verify:

18x25x6 mm dimensions

ACM material

B1SLX2 construction

Additional dust lip

Operating medium

Temperature requirements

Shaft speed

Pressure conditions

OE references where applicable

Technical parameters from another 18x25x6 mm seal should not be transferred to CORTECO 01030093B solely because the dimensions match.

CORTECO 01030093B Technical Data

Manufacturer: CORTECO

Reference: 01030093B

Base reference: 01030093

Trade Number: 82030093

Product: Radial shaft oil seal

Design: B1SLX2

Material: ACM

Inside diameter d: 18 mm

Outside diameter D: 25 mm

Width B: 6 mm

Dimensions: 18x25x6 mm

Dust lip: Yes

DEUTZ-FAHR OE: 04158766, 02238056

FAQ

What are the dimensions of CORTECO 01030093B?

The exact dimensions are 18x25x6 mm: 18 mm inside diameter, 25 mm outside diameter and 6 mm width.

What material is CORTECO 01030093B made from?

The sealing material is ACM - Polyacrylate Rubber.

What is the design designation of CORTECO 01030093B?

The exact CORTECO design designation is B1SLX2.

Does CORTECO 01030093B have a dust lip?

Yes. The seal incorporates an additional dust lip that helps protect the primary sealing area against external contamination.

What is the Trade Number for CORTECO 01030093B?

The Trade Number is 82030093.

What are the DEUTZ-FAHR OE numbers for CORTECO 01030093B?

The confirmed DEUTZ-FAHR OE references are 04158766 and 02238056.

Are CORTECO 01030093 and 01030093B the same reference?

01030093 is the base reference, while 01030093B is the full product reference. Trade Number 82030093 is another identifier associated with the product.

Can any 18x25x6 oil seal replace CORTECO 01030093B?

Not automatically. In addition to the dimensions, the ACM material, B1SLX2 construction, dust lip configuration and requirements of the specific application should be checked.

AI Overview

CORTECO 01030093B is an ACM radial shaft oil seal measuring 18x25x6 mm. Its exact CORTECO design designation is B1SLX2, and the seal incorporates an additional dust lip. Base reference: 01030093. Trade Number: 82030093. DEUTZ-FAHR OE references: 04158766 and 02238056.