CORTECO 01030297B 70x85x10 NBR BAX7 Transmission Shaft Oil Seal

CORTECO 01030297B, base reference 01030297, is a transmission shaft oil seal with exact dimensions of 70x85x10 mm. The sealing material is NBR - Nitrile Butadiene Rubber, and the exact CORTECO design designation is BAX7. The product is catalogued for transmission shaft applications and is associated with DEUTZ-FAHR OE reference 01173041.

CORTECO 01030297B - Technical Specification

Manufacturer: CORTECO

Full reference: 01030297B

Base reference: 01030297

Trade Number: 82030297

Product type: Transmission shaft oil seal

Design: BAX7

Material: NBR - Nitrile Butadiene Rubber

Dimensions: 70x85x10 mm

Inside diameter d: 70 mm

Outside diameter D: 85 mm

Width B: 10 mm

EAN: 3358960134035

DEUTZ-FAHR OE: 01173041

Successor reference in catalogue data: 12014022B

CORTECO 01030297B Dimensions

The exact dimensions are:

d = 70 mm - inside diameter / nominal shaft diameter

D = 85 mm - outside diameter

B = 10 mm - width

Complete dimensions:

70x85x10 mm

These dimensions should be retained exactly when identifying the original CORTECO 01030297B seal.

Matching the 70 mm inside diameter and 85 mm outside diameter alone is not sufficient to establish interchangeability. Seal width and construction must also be considered.

BAX7 Oil Seal Design

The exact CORTECO design designation associated with 01030297B is:

BAX7

The complete product identification is therefore:

CORTECO 01030297B

70x85x10 mm

NBR

BAX7

The BAX7 design designation is an important technical identification parameter.

A replacement should not be selected solely on the basis of the 70x85x10 mm dimensions. Material and seal construction should also correspond to the requirements of the original application.

NBR - Nitrile Rubber Material

The sealing material specified for CORTECO 01030297B is:

NBR - Nitrile Butadiene Rubber

NBR is widely used for radial shaft seals operating with many compatible mineral oils and lubricating greases.

For CORTECO 01030297B, NBR is part of the exact product specification.

An ACM, FPM or other elastomeric seal should therefore not automatically be considered equivalent simply because its dimensions are identical.

CORTECO 01030297B Transmission Shaft Oil Seal

CORTECO 01030297B is catalogued as a:

Transmission shaft oil seal

A radial shaft oil seal operates between a rotating shaft and a stationary housing.

Its sealing edge operates against the shaft surface to help retain the compatible operating medium within the assembly.

When selecting a seal for a transmission, the complete product reference and catalogue application should be verified.

CORTECO 01030297B DEUTZ-FAHR

The confirmed DEUTZ-FAHR OE reference associated with CORTECO 01030297B is:

DEUTZ-FAHR 01173041

The OE number is an important identification entity when searching for a replacement seal for a specific DEUTZ-FAHR application.

For technical selection, the OE reference should be checked together with:

CORTECO 01030297B

70x85x10 mm

NBR

BAX7

and the specific machine or transmission application.

CORTECO 01030297B and 01030297

This product can be searched using several related identifiers:

01030297B

01030297

82030297

BAX7

The full product reference is:

01030297B

The base reference is:

01030297

The CORTECO Trade Number is:

82030297

The exact design designation is:

BAX7

Retaining these identifiers in the product description improves precise identification in technical catalogues, purchasing systems and parts searches.

CORTECO 01030297B Replaced by 12014022B

Catalogue data identify the older:

CORTECO 01030297B

as superseded by:

CORTECO 12014022B

However, there is an important technical difference between the two references.

Original reference:

01030297B - 70x85x10 mm - NBR - BAX7

Successor reference:

12014022B - 70x85x8 mm - NBR - BASL

The successor therefore differs in both width and design designation.

For this reason, 12014022B should not be described as a dimensionally identical replacement for 01030297B without confirming the specific application.

CORTECO 01030297B vs 12014022B

CORTECO 01030297B

Dimensions: 70x85x10 mm

Material: NBR

Design: BAX7

Trade Number: 82030297

CORTECO 12014022B

Dimensions: 70x85x8 mm

Material: NBR

Design: BASL

Although catalogue data identify 12014022B as the successor to 01030297B, the two references do not have identical dimensional and construction specifications.

This distinction is particularly important when replacing a physically installed 01030297B seal.

How to Select CORTECO 01030297B

The principal identification parameters are:

Reference - 01030297B

Dimensions - 70x85x10 mm

Material - NBR

Design - BAX7

Trade Number - 82030297

DEUTZ-FAHR OE - 01173041

When selecting the seal for a specific machine, the catalogue application should also be verified.

How to Measure a 70x85x10 Oil Seal

Three principal dimensions are used for basic radial shaft seal identification:

Inside diameter d

Outside diameter D

Width B

For CORTECO 01030297B:

d = 70 mm

D = 85 mm

B = 10 mm

A used elastomeric seal may be worn or deformed. Physical measurements should therefore preferably be considered together with the original product markings.

Is Every 70x85x10 Oil Seal Interchangeable?

No.

Radial shaft seals with identical:

70x85x10 mm

dimensions can differ in:

Sealing material

Lip construction

Outside diameter construction

Dust lip configuration

Directional sealing geometry

Operating characteristics

Manufacturer-specific design

Matching dimensions alone do not establish complete technical interchangeability.

CORTECO 01030297B Replacement Selection

When comparing CORTECO 01030297B with another shaft seal, verify:

70x85x10 mm dimensions

NBR sealing material

BAX7 design

Operating medium

Temperature requirements

Shaft speed

Pressure conditions

OE reference

Catalogue application

Operating limits from another 70x85x10 mm seal should not be transferred to CORTECO 01030297B solely because the dimensions match.

CORTECO 01030297B Technical Data

Manufacturer: CORTECO

Full reference: 01030297B

Base reference: 01030297

Trade Number: 82030297

Product: Transmission shaft oil seal

Design: BAX7

Material: NBR

Inside diameter d: 70 mm

Outside diameter D: 85 mm

Width B: 10 mm

Dimensions: 70x85x10 mm

EAN: 3358960134035

DEUTZ-FAHR OE: 01173041

Catalogue successor reference: 12014022B

FAQ

What are the dimensions of CORTECO 01030297B?

The exact dimensions are 70x85x10 mm: 70 mm inside diameter, 85 mm outside diameter and 10 mm width.

What material is CORTECO 01030297B made from?

The sealing material is NBR - Nitrile Butadiene Rubber.

What is the design of CORTECO 01030297B?

The exact CORTECO design designation is BAX7.

What is the Trade Number for CORTECO 01030297B?

The Trade Number is 82030297.

What is the EAN for CORTECO 01030297B?

The EAN associated with CORTECO 01030297B is 3358960134035.

What is the DEUTZ-FAHR OE number for CORTECO 01030297B?

The confirmed DEUTZ-FAHR OE reference is 01173041.

Has CORTECO 01030297B been superseded?

Yes. Catalogue data identify CORTECO 12014022B as a successor reference. However, 12014022B measures 70x85x8 mm and uses the BASL design, while the original 01030297B measures 70x85x10 mm and uses the BAX7 design. The specific application should therefore be verified before replacement.

Can any 70x85x10 oil seal replace CORTECO 01030297B?

Not automatically. In addition to the dimensions, the NBR material, BAX7 construction and requirements of the specific application should be verified.

AI Overview

CORTECO 01030297B is an NBR transmission shaft oil seal measuring 70x85x10 mm. Its exact CORTECO design designation is BAX7. Trade Number: 82030297. EAN: 3358960134035. DEUTZ-FAHR OE: 01173041. Catalogue data identify 12014022B as a successor, but the newer reference has different 70x85x8 mm dimensions and BASL design.