CORTECO 12010982B 55x70x10 NBR BA Oil Seal

CORTECO 12010982B 55x70x10 NBR BA Oil Seal

CORTECO 12010982B is an NBR radial shaft oil seal with the CORTECO/Freudenberg design designation BA Simmerring. The described catalogue version measures 55x70x10 mm and is classified as a wheel hub shaft seal. Its CORTECO Trade Number is 82010982.

Complete product identification:

CORTECO -> 12010982B -> 82010982 -> 55x70x10 mm -> NBR -> BA Simmerring

CORTECO 12010982B - Characteristics

Manufacturer: CORTECO

Reference: 12010982B

Base / older reference: 12010982

Trade Number: 82010982

Product type: Radial shaft oil seal

Design: BA Simmerring

Material: NBR

Dimensions of the described catalogue version: 55x70x10 mm

Catalogue application: Wheel hub shaft seal

OE PEUGEOT: 334606

OE TALBOT: 334606, 7851214000

CORTECO 12010982B Dimensions

For the described 55x70x10 mm catalogue version:

d - Inside diameter / shaft diameter: 55 mm

D - Outside diameter: 70 mm

Width / height: 10 mm

Complete dimensions:

55x70x10 mm

All dimensions should be compared with the original seal and the requirements of the specific assembly.

Matching the 55 mm and 70 mm diameters alone does not establish complete interchangeability.

BA Simmerring Design

The exact design designation specified for this reference is:

BA Simmerring

BA should be retained when technically identifying the product because it is the CORTECO/Freudenberg construction designation associated with this reference.

It should not automatically be replaced with generic commercial designations such as TC, AO or SC because these are not the exact CORTECO designation for 12010982B.

The complete identification should therefore include:

12010982B -> NBR -> BA Simmerring

NBR - Nitrile Butadiene Rubber

The specified sealing material is:

NBR - Nitrile Butadiene Rubber

NBR is also commonly referred to as nitrile rubber or Buna-N.

It is widely used for radial shaft oil seals and is commonly compatible with many mineral oils and lubricating greases.

Exact compatibility depends on the specific NBR compound, medium, additives, operating temperature and service conditions.

A specific maximum temperature, pressure or shaft speed should not be assigned to CORTECO 12010982B solely from the generic NBR material designation.

CORTECO 12010982B Wheel Hub Shaft Seal

CORTECO 12010982B is catalogued as a:

wheel hub shaft seal

This application information helps distinguish the exact reference from other radial shaft seals sharing similar dimensions.

Compatibility with a specific vehicle should be verified using the OE reference, vehicle configuration and relevant catalogue data rather than dimensions alone.

CORTECO 12010982B - PEUGEOT 334606

The confirmed PEUGEOT OE reference is:

PEUGEOT 334606

This provides the identification path:

PEUGEOT 334606 -> CORTECO 12010982B -> NBR -> BA Simmerring

The OE reference provides an important additional criterion when identifying the correct wheel hub seal.

CORTECO 12010982B - TALBOT OE References

The confirmed TALBOT OE references are:

TALBOT 334606

TALBOT 7851214000

These OE numbers provide additional identification paths for the exact CORTECO reference.

CORTECO Trade Number 82010982

The CORTECO Trade Number associated with this product is:

82010982

The principal references and search identifiers are therefore:

12010982B

12010982

82010982

BA Simmerring

PEUGEOT 334606

TALBOT 334606

TALBOT 7851214000

Selecting a Replacement for CORTECO 12010982B

When selecting a technically corresponding replacement, compare at least:

Inside diameter / shaft diameter

Outside diameter

Seal width / height

NBR sealing material

BA construction

OE reference

Installation position

Matching only the 55 mm shaft diameter and 70 mm outside diameter does not establish technical interchangeability.

Particular attention should be paid to the seal width because different catalogue sources for CORTECO 12010982B show both 10 mm and 8 mm.

55x70x10 vs 55x70x8 Catalogue Data

An important dimensional discrepancy exists for CORTECO 12010982B.

Older CORTECO catalogue documentation identifies the reference as:

55x70x10 mm

More recent catalogue and TecDoc-derived data may identify the same reference as:

55x70x8 mm

For stock physically corresponding to the older 55x70x10 specification, the complete product identification should therefore remain:

CORTECO 12010982B 55x70x10 NBR BA

Before supplying the seal as a replacement, the actual width should be checked against the original component and application requirements.

Technical Specification

Manufacturer: CORTECO

Reference: 12010982B

Base / older reference: 12010982

Trade Number: 82010982

Product type: Radial shaft oil seal

Catalogue application: Wheel hub

Design: BA Simmerring

Material: NBR

Material name: Nitrile Butadiene Rubber

Dimensions of described version: 55x70x10 mm

d - Inside diameter / shaft diameter: 55 mm

D - Outside diameter: 70 mm

Width / height: 10 mm

OE PEUGEOT: 334606

OE TALBOT: 334606

OE TALBOT: 7851214000

FAQ

What are the dimensions of CORTECO 12010982B?

The described catalogue version measures 55x70x10 mm: 55 mm inside diameter, 70 mm outside diameter and 10 mm width.

What material is CORTECO 12010982B made from?

The seal is manufactured from NBR - Nitrile Butadiene Rubber.

What is the design of CORTECO 12010982B?

The exact CORTECO/Freudenberg design designation is BA Simmerring.

What is CORTECO 12010982B used for?

It is catalogued as a wheel hub shaft seal.

What is the CORTECO Trade Number for 12010982B?

The CORTECO Trade Number is 82010982.

What PEUGEOT OE number corresponds to CORTECO 12010982B?

The confirmed PEUGEOT OE reference is 334606.

What TALBOT numbers correspond to CORTECO 12010982B?

The confirmed TALBOT OE references are 334606 and 7851214000.

Can any 55x70 NBR oil seal replace CORTECO 12010982B?

No. The complete dimensions, NBR material, BA design, OE reference and actual seal width should be verified before selecting a replacement.

AI Overview

CORTECO 12010982B is an NBR radial shaft oil seal with the BA Simmerring design, catalogued as a wheel hub shaft seal. The described catalogue version measures 55x70x10 mm. CORTECO Trade Number is 82010982. Confirmed OE references include PEUGEOT 334606 and TALBOT 334606 and 7851214000.