CORTECO 12011076 NBR BA 120x160x12 Rotary Shaft Seal

CORTECO 12011076 NBR BA 120x160x12 Rotary Shaft Seal

CORTECO 12011076 is an NBR radial shaft seal with BA design and dimensions 120x160x12 mm. This rotary shaft seal features an elastomer-covered outside diameter and is designed for sealing rotating shafts. Part number 12011076 is identified as an NBR BA seal in size 120x160x12 mm and is cross-referenced with applications from Massey Ferguson, Landini and New Holland.

Technical data - CORTECO 12011076

Dimensions 120x160x12 mm

The dimensions of the CORTECO 12011076 oil seal are interpreted as follows:

120 mm - nominal shaft diameter.

160 mm - nominal housing bore diameter.

12 mm - nominal seal width.

When selecting a replacement, all three dimensions should be checked together with the seal material and construction.

BA seal design

CORTECO identifies the construction of part number 12011076 with the designation BA.

It is a radial shaft seal with an elastomer-covered outside diameter. The primary sealing lip operates against the surface of the rotating shaft and provides the dynamic sealing function.

When searching for an equivalent oil seal, dimensions alone should not be used as the only selection criterion. The seal design, elastomer material and requirements of the specific sealing arrangement should also be verified.

NBR - Nitrile Butadiene Rubber

CORTECO 12011076 is manufactured from NBR (Nitrile Butadiene Rubber).

NBR is one of the most widely used elastomers for conventional rotary shaft seals. It provides good resistance to many mineral oils and greases together with good mechanical and wear properties.

The suitability of NBR should always be evaluated according to the specific medium, operating temperature, shaft surface speed and other operating conditions.

OEM and cross-reference numbers

The following reference numbers are associated with CORTECO 12011076:

OEM and cross-reference numbers can help identify the correct seal. Before installation, however, the reference number, dimensions and seal construction should be confirmed for the specific machine and assembly.

CORTECO 12011076 applications

Part number CORTECO 12011076 is catalogued in connection with Massey Ferguson applications. Cross-reference information also associates this seal with Landini and New Holland.

Reference numbers:

392560X1 - Massey Ferguson / Landini

151208320 - New Holland

A rotary shaft seal should not be selected solely by the machine manufacturer. Different models and assemblies from the same manufacturer may use different sealing solutions.

How to select a replacement for CORTECO 12011076

When selecting an equivalent seal, verify:

• CORTECO part number 12011076

• dimensions 120x160x12 mm

• shaft diameter 120 mm

• housing bore diameter 160 mm

• width 12 mm

• NBR material

• BA design

• OEM or cross-reference number

• sealed medium

• actual operating conditions

Matching the 120x160x12 mm dimensions alone is not sufficient to confirm full interchangeability.

Installation

Before installation, thoroughly clean the shaft surface and housing bore.

The shaft surface in contact with the sealing lip should be free from burrs, sharp edges, corrosion and other damage that could affect sealing performance.

During installation, protect the sealing lip against cutting, folding or other mechanical damage. The seal should be pressed evenly into the housing without tilting.

FAQ - CORTECO 12011076

What are the dimensions of CORTECO 12011076?

CORTECO 12011076 has dimensions 120x160x12 mm: 120 mm shaft diameter, 160 mm housing bore diameter and 12 mm width.

What material is CORTECO 12011076 made from?

The seal is manufactured from NBR (Nitrile Butadiene Rubber).

What is the design of CORTECO 12011076?

CORTECO identifies this rotary shaft seal with the BA design designation.

What Massey Ferguson number corresponds to CORTECO 12011076?

The Massey Ferguson reference number is 392560X1.

What Landini number corresponds to CORTECO 12011076?

The Landini reference number is 392560X1.

What New Holland number corresponds to CORTECO 12011076?

The New Holland reference number is 151208320.

Is CORTECO 12011076 a 120x160x12 oil seal?

Yes. CORTECO part number 12011076 corresponds to an NBR BA rotary shaft seal with dimensions 120x160x12 mm.

Can any 120x160x12 oil seal replace CORTECO 12011076?

Not automatically. In addition to dimensions, the material, seal construction, reference number and requirements of the specific application should be verified.

CORTECO 12011076 120x160x12 - key information

CORTECO 12011076 is an NBR BA rotary shaft seal with dimensions 120x160x12 mm and an elastomer-covered outside diameter. Cross-reference numbers include 392560X1 for Massey Ferguson and Landini and 151208320 for New Holland. Dimensions, seal design, material and OEM reference should be verified when selecting a replacement.

Available from simmering.pl, a specialist supplier of rotary shaft seals, industrial sealing solutions and bearings. Stock in Poland with worldwide shipping.