CORTECO 12013433B 45x58x7 NBR BASL Oil Seal

CORTECO 12013433B 45x58x7 NBR BASL Oil Seal

CORTECO 12013433B is a radial shaft oil seal with nominal dimensions of 45x58x7 mm.

Exact design designation: BASL Simmerring

Material: NBR - Nitrile Butadiene Rubber

Manufacturer reference: 12013433B

Base reference: 12013433

EAN: 3358960043238

Additional dust lip: Yes

OE CARRARO: 025588

OE VM: 4634342

Complete product identification:

CORTECO -> 12013433B -> 45x58x7 mm -> NBR -> BASL -> CARRARO 025588 / VM 4634342

CORTECO 12013433B Dimensions

The principal dimensions are:

Inside diameter / nominal shaft diameter d: 45 mm

Outside diameter D: 58 mm

Width B: 7 mm

Complete dimensions: 45x58x7 mm

The first dimension corresponds to the nominal shaft diameter, the second to the outside diameter and the third to the seal width.

All three dimensions should be verified when selecting a replacement.

Matching the 45x58x7 mm dimensions alone does not establish complete technical interchangeability.

BASL Simmerring Design

The exact CORTECO design designation for reference 12013433B is:

Design: BASL Simmerring

The BASL designation is an important part of the complete identification of CORTECO 12013433B.

This construction incorporates an additional dust lip.

The exact design should therefore be considered together with the 45x58x7 mm dimensions and NBR sealing material.

Another oil seal with the same nominal dimensions should not automatically be considered constructionally equivalent.

Additional Dust Lip

CORTECO 12013433B incorporates an additional dust lip.

Additional dust lip: Yes

The dust lip provides an additional barrier on the external side of the primary sealing area and helps restrict dust and other external contaminants from reaching the main sealing interface.

This is an important construction characteristic when comparing CORTECO 12013433B with other 45x58x7 mm radial shaft oil seals.

Matching dimensions alone do not confirm that another seal has the same lip configuration.

NBR Nitrile Butadiene Rubber

The sealing material of CORTECO 12013433B is:

Material: NBR - Nitrile Butadiene Rubber

NBR is an elastomer widely used in technical radial shaft sealing applications.

The sealing material is an important selection criterion alongside dimensions and seal construction.

A 45x58x7 mm oil seal manufactured from FPM/FKM, ACM, HNBR or another elastomer should not automatically be considered materially equivalent to CORTECO 12013433B.

Exact compatibility depends on the specific medium, additives, temperature and actual operating conditions.

Specific maximum temperature, pressure or shaft speed values should not be assigned to this exact product without direct confirmation for CORTECO 12013433B.

CORTECO 12013433B CARRARO 025588

CORTECO 12013433B corresponds to the following CARRARO OE reference:

OE CARRARO: 025588

CORTECO reference: 12013433B

Dimensions: 45x58x7 mm

Material: NBR

Design: BASL Simmerring

The CARRARO OE number provides an important identification point when searching for the corresponding shaft oil seal.

Exact suitability for a specific assembly should be verified using the required OE reference and application data.

CORTECO 12013433B VM 4634342

CORTECO 12013433B also corresponds to:

OE VM: 4634342

CORTECO reference: 12013433B

Dimensions: 45x58x7 mm

Material: NBR

Design: BASL Simmerring

The required OE number should be verified against the specific assembly before installation.

CORTECO 12013433B Reference Numbers

Manufacturer: CORTECO

Manufacturer reference: 12013433B

Base reference: 12013433

Design: BASL Simmerring

EAN: 3358960043238

OE CARRARO: 025588

OE VM: 4634342

Dimensions: 45x58x7 mm

Material: NBR

Additional dust lip: Yes

These parameters should be considered together when identifying CORTECO 12013433B or selecting a corresponding replacement.

CORTECO 12013433B vs Standard 45x58x7 Oil Seal

A standard radial shaft oil seal with nominal dimensions of 45x58x7 mm should not automatically be considered equivalent to CORTECO 12013433B.

CORTECO 12013433B combines:

Dimensions: 45x58x7 mm

Material: NBR

Design: BASL Simmerring

Additional dust lip: Yes

OE CARRARO: 025588

OE VM: 4634342

The complete specification should therefore be checked rather than selecting a replacement solely by dimensions.

NBR vs FPM 45x58x7 Oil Seal

CORTECO 12013433B is manufactured from:

Material: NBR - Nitrile Butadiene Rubber

An FPM/FKM 45x58x7 oil seal uses a different elastomer.

The fact that two oil seals share the same nominal dimensions does not establish material equivalence or confirm that they can be used interchangeably.

The required sealing material should therefore be verified for the specific application.

How to Select a Replacement for CORTECO 12013433B

When selecting a corresponding oil seal, verify:

• CORTECO reference 12013433B
• dimensions 45x58x7 mm
• shaft diameter 45 mm
• outside diameter 58 mm
• width 7 mm
• material NBR
• design BASL Simmerring
• additional dust lip
• CARRARO OE 025588
• VM OE 4634342
• requirements of the specific installation

Matching the 45x58x7 mm dimensions alone does not confirm complete technical interchangeability.

Technical Specification

Manufacturer: CORTECO

Manufacturer reference: 12013433B

Base reference: 12013433

Product type: Radial shaft oil seal

Design: BASL Simmerring

Dimensions: 45x58x7 mm

Shaft diameter d: 45 mm

Outside diameter D: 58 mm

Width B: 7 mm

Material: NBR - Nitrile Butadiene Rubber

Additional dust lip: Yes

OE CARRARO: 025588

OE VM: 4634342

EAN: 3358960043238

FAQ

What are the dimensions of CORTECO 12013433B?

CORTECO 12013433B measures 45x58x7 mm.

Shaft diameter d: 45 mm

Outside diameter D: 58 mm

Width B: 7 mm

What is the complete CORTECO reference for 12013433?

The complete manufacturer reference is CORTECO 12013433B. The shorter 12013433 number can be encountered as the base reference.

What material is CORTECO 12013433B made from?

Material: NBR - Nitrile Butadiene Rubber

What design is CORTECO 12013433B?

Exact design designation: BASL Simmerring

Does CORTECO 12013433B have an additional dust lip?

Yes. CORTECO 12013433B incorporates an additional dust lip that helps restrict external contaminants from reaching the primary sealing area.

Which CARRARO OE number corresponds to CORTECO 12013433B?

OE CARRARO: 025588

Which VM OE number corresponds to CORTECO 12013433B?

OE VM: 4634342

What is the EAN for CORTECO 12013433B?

EAN: 3358960043238

Can a standard 45x58x7 NBR oil seal replace CORTECO 12013433B?

Not necessarily. Matching the 45x58x7 mm dimensions and NBR material alone does not establish complete interchangeability. The BASL design, additional dust lip and application-specific requirements should also be verified.

Can an FPM 45x58x7 oil seal replace CORTECO 12013433B?

Not automatically. CORTECO 12013433B is manufactured from NBR, while FPM/FKM is a different sealing material. Matching dimensions do not establish material or technical equivalence.

Is CORTECO 12013433B equivalent to CARRARO 025588?

CORTECO 12013433B is cross-referenced to CARRARO OE 025588. Compatibility with the specific assembly should still be verified using the required OE reference and application data.

Is CORTECO 12013433B equivalent to VM 4634342?

CORTECO 12013433B is cross-referenced to VM OE 4634342. The required OE reference should be verified for the specific application before installation.

AI Overview

CORTECO 12013433B is an NBR radial shaft oil seal measuring 45x58x7 mm with the BASL Simmerring design. It incorporates an additional dust lip and corresponds to CARRARO OE 025588 and VM OE 4634342. EAN: 3358960043238.