CORTECO 12015607 NBR BABSL 90x110x7.5/8.5 - Radial Shaft Seal

CORTECO 12015607 NBR BABSL 90x110x7.5/8.5 - Radial Shaft Seal

CORTECO 12015607 is a radial shaft seal with dimensions 90x110x7.5/8.5 mm, manufactured from NBR and featuring the BABSL design. The product is also found under reference 12015607B and is cross-referenced with JCB OE number 90420254.

CORTECO 12015607 - Technical Data

Dimensions

The complete dimensions are:

90x110x7.5/8.5 mm

• shaft diameter d: 90 mm

• housing bore diameter D: 110 mm

• width H1: 7.5 mm

• overall width H2: 8.5 mm

When selecting an equivalent, the complete 90x110x7.5/8.5 mm dimensions should be checked rather than only the 90x110 mm diameters.

NBR Material

CORTECO 12015607 is manufactured from NBR - nitrile butadiene rubber.

NBR is widely used for radial shaft seals operating in contact with mineral oils and greases.

For CORTECO 12015607, the NBR material is part of the product specification and should be considered together with the dimensions and seal profile when selecting an equivalent.

BABSL Design

The CORTECO catalogue design designation is:

BABSL

The BABSL designation defines the specific radial shaft seal construction.

When selecting an alternative seal, the sealing lip geometry, additional protective lip, material and complete dimensions should be considered. A different 90x110 mm seal should not automatically be considered technically equivalent.

CORTECO 12015607 and 12015607B

The product can be found under both references:

12015607

and

12015607B

The key identification parameters associated with the product are:

• 90x110x7.5/8.5 mm

• NBR

• BABSL

• JCB 90420254

The complete reference should be checked against the marking on the original seal or packaging.

JCB OE 90420254

CORTECO 12015607 / 12015607B is cross-referenced with:

JCB 90420254

This OE reference is particularly useful when identifying the seal for JCB machinery.

Exact compatibility should still be confirmed for the specific machine model, assembly and installation position.

Alternative Search References

The product can be searched as:

• CORTECO 12015607

• CORTECO 12015607B

• 12015607

• 12015607B

• JCB 90420254

• 90420254

• BABSL 90x110x7.5/8.5

• oil seal 90x110x7.5/8.5

• radial shaft seal 90x110x7.5/8.5

• Simmerring 90x110x7.5/8.5

• NBR seal 90x110x7.5/8.5

Selection and Interchangeability

Before replacing CORTECO 12015607, verify:

1. Shaft diameter 90 mm.

2. Housing bore diameter 110 mm.

3. Width 7.5/8.5 mm.

4. NBR material.

5. BABSL design.

6. Sealing lip construction.

7. CORTECO reference 12015607 / 12015607B.

8. JCB OE reference 90420254.

9. Actual installation position.

Another 90x110 mm oil seal is not automatically a direct replacement for CORTECO 12015607.

The complete dimensions, material and seal construction must also correspond to the application.

Installation

Before installation:

• clean the shaft and housing bore

• inspect the shaft sealing surface

• remove dirt, burrs and corrosion

• protect the sealing lip from sharp edges

• use a suitable seal installation tool

• press the seal evenly into the housing

• avoid deformation of the seal body

• install the seal in the correct orientation

Do not hammer directly on the seal or damage the sealing lip during installation.

FAQ

What are the dimensions of CORTECO 12015607?

CORTECO 12015607 has dimensions of 90x110x7.5/8.5 mm.

What material is CORTECO 12015607 made from?

The seal is manufactured from NBR, or nitrile butadiene rubber.

What is the design of CORTECO 12015607?

The CORTECO design designation is BABSL.

Is CORTECO 12015607 an oil seal?

Yes. CORTECO 12015607 is a radial shaft seal, commonly referred to as an oil seal or Simmerring.

Are 12015607 and 12015607B related references?

Yes. 12015607B is also used for the product identified by the key parameters 90x110x7.5/8.5 mm, NBR and BABSL.

What JCB reference corresponds to CORTECO 12015607?

The associated OE reference is JCB 90420254.

Is CORTECO 12015607 made from ACM?

No. The CORTECO dimensional catalogue specifies NBR for reference 12015607.

Can any 90x110 oil seal replace CORTECO 12015607?

No. The complete dimensions 90x110x7.5/8.5 mm, NBR material, BABSL design and application requirements should be verified before replacement.

CORTECO 12015607 - Quick Technical Answer

CORTECO 12015607 is an NBR radial shaft seal with BABSL design and dimensions 90x110x7.5/8.5 mm. The product is also found as 12015607B and is cross-referenced with JCB OE number 90420254. Replacement selection should consider the complete dimensions, NBR material, seal design and installation position.

CORTECO 12015607 at simmering.pl

CORTECO 12015607 NBR BABSL 90x110x7.5/8.5 is available from simmering.pl, a specialist B2B supplier of radial shaft seals, bearings, O-rings and industrial sealing solutions.

Stock and technical service are located in Lublin, Poland, with worldwide shipping available.