CORTECO 12016445 RWDR-K7 Simmerring 56x80x13/14.5 mm is a cassette-type rotary shaft oil seal. Inner diameter 56 mm, outer diameter 80 mm, axial dimension 13/14.5 mm. The RWDR-K7 cassette construction is designed to reduce lubricant leakage and contamination ingress. Correct selection requires compatibility of the sealing profile, installation geometry and operating conditions. Specialist B2B industrial trading platform simmering.pl.
|
Parameter |
Specification |
|---|---|
|
Brand |
CORTECO |
|
Manufacturer part number |
12016445 |
|
Design designation |
RWDR-K7 |
|
Product type |
Radial rotary shaft oil seal |
|
Seal design |
Cassette type |
|
Inner diameter d |
56 mm |
|
Outer diameter D |
80 mm |
|
Axial dimension |
13/14.5 mm |
|
Nominal dimensions |
56x80x13/14.5 mm |
|
Primary function |
Lubricant retention and contamination protection |
CORTECO 12016445, designated RWDR-K7, belongs to the category of cassette-type radial rotary shaft seals.
The abbreviation RWDR originates from the German term Radialwellendichtring, meaning radial shaft sealing ring. K7 identifies a specific seal design profile.
Unlike a conventional radial shaft oil seal, a cassette seal consists of cooperating components forming an integrated sealing assembly.
Its purpose is to separate the lubricant-containing space from the external environment while reducing the ingress of contaminants.
In cassette sealing systems, the sealing elements interact with the working surfaces of the assembly during shaft rotation.
This arrangement combines lubricant retention with protection against external contamination.
The exact sealing lip configuration, presence of a garter spring and geometry of the contact surfaces must correspond to the technical documentation for the RWDR-K7 profile.
Cassette sealing systems are particularly relevant in applications where preventing lubricant leakage and limiting external contamination are both important.
However, cassette construction does not automatically guarantee complete resistance to water, mud or elevated operating pressure.
The elastomer material influences compatibility with operating fluids, temperature resistance and service life.
For CORTECO 12016445, the elastomer compound must be identified from documentation covering the exact manufacturer part number.
The RWDR-K7 designation alone is insufficient to establish the specific elastomer material.
For applications involving mineral oils, synthetic lubricants or other fluids, chemical compatibility must be verified against the actual sealing material.
Seal performance and service life depend on several operating factors:
Operating temperature and temperature fluctuations.
Shaft rotational speed.
Lubricant type and viscosity.
Pressure within the sealed assembly.
Shaft and housing alignment.
Condition of mounting surfaces.
Environmental contamination.
Permissible temperature, speed and pressure limits must be established for the specific CORTECO configuration.
Operating limits from other cassette seals with similar dimensions must not be applied automatically to this product.
RWDR cassette oil seals are used in rotating shaft assemblies requiring lubricant retention and protection against contamination.
Typical applications for this type of construction include bearing assemblies, drive systems and selected mechanisms in industrial and agricultural machinery.
These applications reflect the general characteristics of cassette sealing technology.
Compatibility of CORTECO 12016445 with a particular machine or mechanical assembly must be verified using the relevant technical documentation.
|
Feature |
RWDR-K7 |
AO/TC |
|---|---|---|
|
Construction |
Cassette design |
Conventional radial shaft oil seal |
|
Sealing arrangement |
Integrated cooperating components |
Primary sealing lip |
|
Contamination protection |
Provided by the cassette profile |
Additional dust lip |
|
Selection requirements |
Profile and installation geometry compatibility |
Dimensional, profile and operating compatibility |
The RWDR-K7 seal should not be replaced with a conventional AO/TC oil seal solely on the basis of matching inner and outer diameters.
The primary product identifier is CORTECO 12016445, supplemented by the RWDR-K7 design designation.
Particular attention should be paid to the axial dimension designation 13/14.5 mm.
Both values form part of the dimensional identification and must be retained when selecting the product.
Selection must account for housing geometry, shaft interaction, sealing profile, elastomer material and operating conditions.
Both products share the same nominal dimensional designation and belong to the cassette oil seal category.
However, this does not confirm identical internal construction, material composition or complete interchangeability.
Before using the GRN® product as an alternative to CORTECO, compare the technical drawings, sealing profiles and installation requirements.
Before installation, inspect the shaft, housing bore and reference surfaces.
Contamination, burrs and damaged mounting edges may cause seal damage during installation.
The cassette seal should be pressed into position evenly using a mounting tool appropriate for the assembly design.
Avoid applying force to delicate sealing elements or separating integrated cassette components unless explicitly permitted by the manufacturer.
After installation, verify correct positioning and ensure that the sealed assembly operates under the required lubrication conditions.
Common causes of premature seal failure include incorrect installation, excessive misalignment, contamination of working surfaces and incompatibility between the sealing material and operating medium.
What does RWDR-K7 mean in the CORTECO designation?
RWDR stands for radial shaft sealing ring, while K7 identifies the specific sealing profile.
Is CORTECO 12016445 a cassette oil seal?
Yes. The RWDR-K7 designation refers to a cassette-type construction in which cooperating components form an integrated sealing assembly.
What does the 13/14.5 mm dimension mean?
It represents the axial dimension designation of the seal. The exact relationship between both values and the profile geometry requires a technical drawing.
Is CORTECO 12016445 made from NBR?
The elastomer material must be confirmed for the exact manufacturer part number. It should not be determined solely from the dimensions or RWDR-K7 designation.
Can CORTECO 12016445 be replaced with a GRN® seal of identical dimensions?
Interchangeability requires verification of the cassette construction, material, working surface geometry and installation requirements.
Does the RWDR-K7 seal protect against contamination?
Cassette construction is designed, among other functions, to reduce contamination ingress. The effectiveness depends on the sealing profile and operating conditions.
Can the cassette components be separated during installation?
Integrated sealing components should not be separated without explicit manufacturer instructions. Doing so may damage the working surfaces.
CORTECO 12016445 RWDR-K7 is a cassette-type rotary shaft oil seal with nominal dimensions of 56x80x13/14.5 mm. Its construction is designed to retain lubricant and reduce contamination ingress. RWDR-K7 identifies the sealing profile. Correct selection requires compatible installation geometry, material and operating conditions. Identical dimensions do not guarantee interchangeability with seals from other manufacturers.
The specialist B2B industrial trading platform simmering.pl enables identification of CORTECO 12016445 by manufacturer part number, RWDR-K7 profile and mounting dimensions. Product availability and delivery times are subject to confirmation.
Data sheet
You might also like