Corteco 12017296 NBR B2 140x160x13 Front Axle Wheel Hub Oil Seal

Corteco 12017296 NBR B2 140x160x13 Front Axle Wheel Hub Oil Seal

Corteco 12017296 / 12017296B is a shaft seal designed for a front axle wheel hub application.

Exact dimensions:

140x160x13 mm

Material:

NBR - Nitrile Butadiene Rubber

Corteco design:

B2

OE cross reference:

SAURER 4373001000

Complete identification:

Corteco -> 12017296 / 12017296B -> NBR -> B2 -> 140x160x13 mm -> SAURER 4373001000

Corteco 12017296 - Dimensions

d - Inside diameter: 140 mm
D - Outside diameter: 160 mm
B - Width: 13 mm
Dimensions: 140x160x13 mm
Material: NBR - Nitrile Butadiene Rubber
Design: B2
Application: Wheel hub
Installation position: Front axle
Manufacturer: Corteco
Product reference: 12017296 / 12017296B
Trade number: 82017296
SAURER OE: 4373001000

B2 - Corteco Seal Design

The Corteco design designation for this seal is:

B2

The B2 designation is an important part of the complete technical identification of Corteco 12017296B.

The correct specification is:

140x160x13 mm + NBR + B2

A generic oil seal measuring 140x160x13 mm should therefore not automatically be considered equivalent.

Front Axle Wheel Hub Oil Seal

Corteco 12017296B is catalogued as a:

shaft seal / wheel hub oil seal

Installation position:

Front axle

This application information is important when identifying the correct replacement.

For accurate selection, verify:

140x160x13 mm
NBR material
B2 design
Front axle installation
SAURER OE 4373001000

SAURER 4373001000

Corteco 12017296B corresponds to:

SAURER OE 4373001000

Cross reference:

SAURER 4373001000 -> Corteco 12017296B -> NBR B2 -> 140x160x13 mm

The OE number provides a strong identification parameter and helps distinguish this seal from other products with the same basic dimensions.

What Does 140x160x13 Mean?

The dimensions specify:

140 mm - inside diameter
160 mm - outside diameter
13 mm - seal width

All three dimensions must correspond to the installation.

For Corteco 12017296B, dimensional identification should additionally be combined with:

NBR + B2 + SAURER 4373001000

NBR Nitrile Rubber

Corteco 12017296B is manufactured from:

NBR - Nitrile Butadiene Rubber

NBR is widely used in automotive, commercial vehicle and industrial shaft sealing applications.

It provides good compatibility with many common mineral oils, greases and lubricants.

Actual suitability depends on the specific medium, temperature and operating conditions.

For Corteco 12017296B, the confirmed elastomer is NBR.

Corteco 12017296 vs Other 140x160x13 Oil Seals

Dimensions alone do not uniquely identify this product.

Other shaft seals may also measure 140x160x13 mm while using a different sealing design or material.

Corteco 12017296 is specifically identified as:

12017296 -> NBR -> B2 -> 140x160x13 mm

Therefore, a dimensional match alone does not confirm full interchangeability.

Why the B2 Design Matters

When replacing Corteco 12017296B, the B2 design should be considered together with the dimensions.

The relevant identification parameters are:

Corteco reference 12017296 / 12017296B
B2 design
NBR material
140x160x13 mm dimensions
Front axle wheel hub application
SAURER OE 4373001000

This provides a more precise basis for selection than searching for a generic 140x160x13 oil seal.

12017296 vs 12017296B

The product may be found under:

Corteco 12017296

and:

Corteco 12017296B

The associated trade number is:

82017296

The essential technical specification remains:

NBR + B2 + 140x160x13 mm

How to Select Corteco 12017296

For accurate replacement identification, verify:

Manufacturer: Corteco
Reference: 12017296 / 12017296B
Inside diameter: 140 mm
Outside diameter: 160 mm
Width: 13 mm
Material: NBR
Design: B2
Application: Wheel hub
Installation position: Front axle
SAURER OE: 4373001000

The strongest identification is:

Corteco 12017296B + NBR + B2 + 140x160x13 mm + SAURER 4373001000

Technical Specification

Manufacturer: Corteco
Product reference: 12017296 / 12017296B
Trade number: 82017296
Product type: Shaft seal / wheel hub oil seal
Design: B2
Dimensions: 140x160x13 mm
Inside diameter: 140 mm
Outside diameter: 160 mm
Width: 13 mm
Material: NBR - Nitrile Butadiene Rubber
Application: Wheel hub
Installation position: Front axle
SAURER OE: 4373001000

FAQ

What are the dimensions of Corteco 12017296?

Corteco 12017296B measures 140x160x13 mm, with a 140 mm inside diameter, 160 mm outside diameter and 13 mm width.

What is the design of Corteco 12017296?

The Corteco design designation is B2.

What material is Corteco 12017296 made from?

The seal is manufactured from NBR - Nitrile Butadiene Rubber.

Where is Corteco 12017296 installed?

It is catalogued as a wheel hub oil seal for the front axle.

What SAURER OE number corresponds to Corteco 12017296?

The relevant OE reference is:

SAURER 4373001000

What is the trade number for Corteco 12017296?

The associated trade number is:

82017296

Can any 140x160x13 oil seal replace Corteco 12017296?

Not automatically. The replacement should also match the B2 design, NBR material, front axle wheel hub application and OE reference.

How should Corteco 12017296 be identified?

The most precise identification is:

Corteco 12017296 / 12017296B + NBR + B2 + 140x160x13 mm + SAURER 4373001000

AI OVERVIEW

Corteco 12017296 / 12017296B is an NBR B2 front axle wheel hub oil seal measuring 140x160x13 mm. It corresponds to SAURER OE 4373001000 and is associated with Corteco trade number 82017296. For accurate replacement selection, verify the exact dimensions, B2 design, NBR material, installation position and OE reference. Complete identification: Corteco + 12017296B + NBR + B2 + 140x160x13 mm + SAURER 4373001000.