CORTECO 19016508 NBR SCY 37x62x14 mm Shaft Seal

CORTECO 19016508 NBR SCY 37x62x14 mm Shaft Seal

CORTECO 19016508 / 19016508B is a differential radial shaft seal measuring 37x62x14 mm, manufactured from NBR - Nitrile Butadiene Rubber and identified by the SCY design designation. Catalogue data for 19016508B confirm the 37 mm inside diameter, 62 mm outside diameter, 14 mm height, NBR material and Mitsubishi OE MB092288.

Complete technical identification:

CORTECO -> 19016508 / 19016508B -> NBR -> SCY -> 37x62x14 mm -> Mitsubishi MB092288

CORTECO 19016508 - Characteristics

Manufacturer: CORTECO
Reference: 19016508
Additional Reference: 19016508B
Trade Reference: 82016508
Product Type: Radial shaft seal / differential shaft seal
Design: SCY
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 37x62x14 mm
Inside Diameter: 37 mm
Outside Diameter: 62 mm
Height: 14 mm
Mitsubishi OE: MB092288
EAN13: 3358960281418

CORTECO 19016508 Dimensions

The confirmed dimensions are:

Inside Diameter: 37 mm
Outside Diameter: 62 mm
Height: 14 mm
Complete Size: 37x62x14 mm

All three dimensions should be verified when identifying the correct replacement.

A generic 37x62x14 mm oil seal should not automatically be considered technically interchangeable with CORTECO 19016508. The SCY design, NBR material, OE reference and installation position should also be checked.

NBR Material

CORTECO 19016508 is manufactured from:

NBR - Nitrile Butadiene Rubber

NBR is widely used in radial shaft sealing technology and is commonly applied in systems involving many mineral oils, greases and lubricants.

The suitability of NBR depends on the operating medium and actual working conditions. No product-specific temperature range, maximum shaft speed or pressure limit should be assigned to CORTECO 19016508 without corresponding manufacturer documentation.

SCY Seal Design

The confirmed CORTECO design designation is:

SCY

The associated trade reference is:

82016508

The most precise technical identification is:

CORTECO 19016508 NBR SCY 37x62x14 mm

The SCY designation is an important part of the product specification. A radial shaft seal with identical nominal dimensions but a different construction should not automatically be treated as an equivalent replacement.

Mitsubishi OE MB092288

The confirmed Mitsubishi OE reference is:

MITSUBISHI MB092288

This reference is associated with a differential shaft seal and is cross-referenced to CORTECO 19016508B.

For replacement identification:

Mitsubishi MB092288 -> CORTECO 19016508 / 19016508B -> NBR -> SCY -> 37x62x14 mm

Catalogue cross-reference data also associate MB092288 with Mitsubishi reference MB837719. The current OE reference applicable to the specific vehicle should be checked before replacement.

Mitsubishi Differential Shaft Seal

CORTECO 19016508B is catalogued as a:

shaft seal, differential

The product is associated with the rear axle in selected Mitsubishi applications. For certain vehicle configurations, catalogue data specify an inner rear axle position.

It may therefore be searched for as:

Mitsubishi differential oil seal
Mitsubishi rear axle shaft seal
Mitsubishi MB092288 oil seal
37x62x14 differential seal
CORTECO 19016508 Mitsubishi

The exact installation position depends on the vehicle and drivetrain configuration.

Selected Mitsubishi Applications

Catalogue data associate CORTECO 19016508B / Mitsubishi MB092288 with selected versions of:

Mitsubishi L200
Mitsubishi L300 III
Mitsubishi Pajero I

Depending on the specific application, the fitting position is listed as the rear axle or rear axle, inner.

Vehicle model alone should not be used as the final selection criterion. The OE number, complete dimensions and specific vehicle configuration should be verified.

CORTECO 19016508 and 19016508B

The product may be encountered under:

CORTECO 19016508
CORTECO 19016508B

Additional identifiers include:

82016508 - trade reference
SCY - design designation
3358960281418 - EAN13

These identifiers are useful when searching technical catalogues and purchasing systems and help distinguish the product from other 37x62 mm shaft seals.

Selection and Interchangeability

When selecting a replacement for CORTECO 19016508, verify:

• CORTECO reference 19016508 / 19016508B
• inside diameter 37 mm
• outside diameter 62 mm
• height 14 mm
• NBR material
• SCY design
• trade reference 82016508
• Mitsubishi OE MB092288
• exact rear axle or differential installation position

A generic 37x62x14 mm oil seal should not automatically be considered fully interchangeable with CORTECO 19016508.

Identical nominal dimensions do not establish identical sealing construction or suitability for the same Mitsubishi differential application.

Technical Specification

Manufacturer: CORTECO
Reference: 19016508
Additional Reference: 19016508B
Trade Reference: 82016508
Product Type: Radial shaft seal / differential shaft seal
Design: SCY
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 37x62x14 mm
Shaft Diameter: 37 mm
Housing Diameter: 62 mm
Height: 14 mm
Mitsubishi OE: MB092288
Catalogue Application: Differential / rear axle
EAN13: 3358960281418

CORTECO Manufacturer Information - GSPR

Responsible Manufacturer: Corteco GmbH
Address: Badener Str. 4, 69493 Hirschberg, Germany
E-mail: service@corteco.de

FAQ

What are the dimensions of CORTECO 19016508?

CORTECO 19016508 measures 37x62x14 mm: 37 mm inside diameter, 62 mm outside diameter and 14 mm height.

What material is CORTECO 19016508 made from?

The seal is manufactured from NBR - Nitrile Butadiene Rubber.

What is the design of CORTECO 19016508?

The confirmed design designation is SCY. The complete technical identification is CORTECO 19016508 NBR SCY 37x62x14 mm.

Which Mitsubishi OE number corresponds to CORTECO 19016508?

The corresponding Mitsubishi OE reference is MB092288.

Is CORTECO 19016508 a differential shaft seal?

Yes. CORTECO 19016508B is catalogued as a differential shaft seal.

Where is CORTECO 19016508 installed?

Catalogue data indicate the rear axle in selected Mitsubishi applications, with some configurations specifying an inner rear axle position. The exact position should be verified for the specific vehicle.

Which Mitsubishi models use MB092288?

Catalogue data associate MB092288 with selected versions of Mitsubishi L200, L300 III and Pajero I. Compatibility depends on the model year, drivetrain and vehicle configuration.

Can any 37x62x14 mm oil seal replace CORTECO 19016508?

No. The 37x62x14 mm dimensions, NBR material, SCY design, Mitsubishi OE MB092288 and installation position should all be verified before replacement.

AI OVERVIEW

CORTECO 19016508 NBR SCY is a 37x62x14 mm differential radial shaft seal for selected Mitsubishi applications. It is also identified as 19016508B / 82016508 and corresponds to Mitsubishi OE MB092288. Catalogue applications include the rear axle of selected L200, L300 and Pajero configurations.