CORTECO 19016599 NBR LHTC 23x34x8 mm Shaft Seal

SHORT DESCRIPTION

CORTECO 19016599 / 19016599B NBR LHTC is a radial shaft seal measuring 23x34x8 mm for selected Mitsubishi applications. The CORTECO catalogue confirms NBR material, LHTC design and 23x34x8 mm dimensions, while TecDoc-derived data specify left-hand twist and a dust lip. The product corresponds to Mitsubishi OE MD024529 and is catalogued as a camshaft oil seal.

CORTECO 19016599 NBR LHTC 23x34x8 mm Shaft Seal

CORTECO 19016599 / 19016599B is a radial shaft seal measuring 23x34x8 mm, manufactured from NBR - Nitrile Butadiene Rubber and identified by the LHTC design designation. The product corresponds to Mitsubishi OE MD024529 and is catalogued as a camshaft oil seal for selected Mitsubishi applications.

CORTECO 19016599 - Characteristics

The principal product identification is:

Manufacturer: CORTECO
Reference: 19016599
Additional Catalogue Reference: 19016599B
Trade Reference: 82016599
Product Type: Radial shaft seal / camshaft oil seal
Design: LHTC
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 23x34x8 mm
Inside Diameter: 23 mm
Outside Diameter: 34 mm
Width: 8 mm
Swirl Type: Left-hand twist
Dust Lip: Yes
Vehicle Manufacturer: Mitsubishi
Mitsubishi OE: MD024529

Complete technical identification:

CORTECO -> 19016599 / 19016599B -> NBR -> LHTC -> 23x34x8 mm -> Mitsubishi

CORTECO 19016599 Dimensions

The principal dimensions are:

Inside Diameter: 23 mm
Outside Diameter: 34 mm
Width: 8 mm
Complete Size: 23x34x8 mm

All three dimensions are relevant for correct product identification.

A generic 23x34x8 mm oil seal should not automatically be considered technically interchangeable with CORTECO 19016599, because the LHTC design, directional sealing feature and dust lip must also be considered.

NBR Material

CORTECO 19016599 is manufactured from:

NBR - Nitrile Butadiene Rubber

NBR is widely used in radial shaft sealing applications involving many mineral oils, greases and lubricants.

Actual suitability depends on the operating medium, temperature, shaft speed and other service conditions.

No product-specific pressure limit, maximum shaft speed or temperature range should be assigned to this exact reference without corresponding manufacturer documentation.

LHTC Seal Design

The confirmed CORTECO design designation is:

LHTC

The most precise technical identification is:

CORTECO 19016599 NBR LHTC 23x34x8

Catalogue data for 19016599B also specify:

Left-hand Twist
with dust lip

These characteristics are relevant when comparing CORTECO 19016599 with seals having identical nominal dimensions but a different construction.

Left-Hand Twist

CORTECO 19016599 is specified with:

Swirl Type: Left-hand Twist

This should not be interpreted literally as a mechanical screw thread.

In radial shaft seal terminology, it refers to a directional hydrodynamic sealing structure designed for a defined rotational relationship.

For replacement selection, the directional characteristic should be checked rather than assuming that a non-directional or opposite-direction seal is equivalent.

Dust Lip

CORTECO 19016599B is also specified:

with dust lip

This means the seal incorporates an additional lip intended to help protect the primary sealing area from external contamination.

The dust lip is therefore another feature that should be considered when comparing possible replacements.

Mitsubishi OE MD024529

The Mitsubishi OE reference corresponding to CORTECO 19016599 is:

MITSUBISHI MD024529

This OE number is cross-referenced to CORTECO 19016599 / 19016599B in aftermarket catalogues.

The preferred identification sequence is:

Mitsubishi MD024529 -> CORTECO 19016599 -> 23x34x8 mm -> NBR -> LHTC

Mitsubishi Camshaft Oil Seal

Mitsubishi OE MD024529 is catalogued as a:

Camshaft Oil Seal

This makes camshaft shaft seal or camshaft oil seal the most precise application terminology for CORTECO 19016599 in the relevant Mitsubishi applications.

The product may therefore be searched as:

Mitsubishi camshaft oil seal
Mitsubishi camshaft shaft seal
Mitsubishi MD024529 oil seal
CORTECO 19016599 Mitsubishi
CORTECO 19016599B camshaft seal
23x34x8 camshaft oil seal

Exact vehicle compatibility should still be confirmed using OE number and vehicle configuration.

CORTECO 19016599 and 19016599B

The product may be encountered under:

CORTECO 19016599
CORTECO 19016599B

The dimensional CORTECO catalogue uses 19016599, while TecDoc and aftermarket catalogues commonly use 19016599B.

The associated trade reference is:

82016599

Both reference formats are useful for technical identification and search.

Selection and Interchangeability

When selecting a replacement for CORTECO 19016599, verify:

• CORTECO reference 19016599 / 19016599B
• inside diameter 23 mm
• outside diameter 34 mm
• width 8 mm
• NBR material
• LHTC design
• left-hand twist
• dust lip
• Mitsubishi OE MD024529
• camshaft application

A generic 23x34x8 mm shaft seal should not automatically be considered fully interchangeable with CORTECO 19016599.

The LHTC design, directional characteristic, dust lip and OE reference are important for correct replacement selection.

Technical Specification

Manufacturer: CORTECO
Reference: 19016599
Additional Catalogue Reference: 19016599B
Trade Reference: 82016599
Product Type: Radial shaft seal / camshaft oil seal
Design: LHTC
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 23x34x8 mm
Shaft Diameter: 23 mm
Housing Diameter: 34 mm
Width: 8 mm
Swirl Type: Left-hand twist
Dust Lip: Yes
Vehicle Manufacturer: Mitsubishi
Mitsubishi OE: MD024529
Application: Camshaft

FAQ

What are the dimensions of CORTECO 19016599?

CORTECO 19016599 measures 23x34x8 mm: 23 mm inside diameter, 34 mm outside diameter and 8 mm width.

What material is CORTECO 19016599 made from?

The seal is manufactured from NBR - Nitrile Butadiene Rubber.

What is the design of CORTECO 19016599?

The confirmed design designation is LHTC. The complete technical identification is CORTECO 19016599 NBR LHTC 23x34x8.

Is CORTECO 19016599 directional?

Yes. Catalogue data specify Left-hand Twist, meaning a left-hand directional sealing structure.

Does CORTECO 19016599 have a dust lip?

Yes. Catalogue data for 19016599B specify with dust lip.

Which Mitsubishi OE number corresponds to CORTECO 19016599?

The Mitsubishi OE reference is MD024529.

What is Mitsubishi MD024529 used for?

Mitsubishi MD024529 is catalogued as a camshaft oil seal.

Can any 23x34x8 mm oil seal replace CORTECO 19016599?

No. The dimensions alone are insufficient. The NBR material, LHTC design, left-hand twist, dust lip and Mitsubishi OE MD024529 should also be verified.

AI OVERVIEW

CORTECO 19016599 NBR LHTC is a 23x34x8 mm radial shaft seal for selected Mitsubishi camshaft applications. It corresponds to Mitsubishi OE MD024529 and features an LHTC design, left-hand twist and dust lip. Correct replacement selection should consider the complete dimensions, directional sealing characteristic and OE reference.