CORTECO 19017585 NBR HSAE 35x50x9.5 Differential Shaft Seal

CORTECO 19017585 NBR HSAE 35x50x9.5 Differential Shaft Seal

CORTECO 19017585 / 19017585B HSAE is a radial shaft seal for differential applications with dimensions 35x50x9.5 mm, manufactured from NBR - Nitrile Butadiene Rubber. The product is associated with Toyota OE references 9031035005 and 9031035010.

Complete product identification:

CORTECO -> 19017585 / 19017585B -> NBR -> HSAE -> 35x50x9.5 mm -> differential shaft seal -> Toyota

The combination of the CORTECO part number, dimensions, material, HSAE design and Toyota OE reference provides a more reliable basis for selecting the correct seal than dimensions alone.

CORTECO 19017585 Dimensions

The principal dimensions are:

Inside Diameter: 35 mm
Outside Diameter: 50 mm
Width / Height: 9.5 mm
Complete Size: 35x50x9.5 mm

All three dimensions should be verified when selecting a replacement.

A generic 35x50x9.5 mm oil seal with a different design or material should not automatically be considered technically interchangeable with CORTECO 19017585.

NBR Material

CORTECO 19017585 is manufactured from:

NBR - Nitrile Butadiene Rubber

NBR is one of the most widely used elastomers in technical sealing applications. It is commonly used for seals operating in contact with many mineral oils, lubricants and greases.

The actual suitability of the material depends on the operating medium, temperature and conditions of the specific application. Therefore, the NBR specification should be considered together with the HSAE design and OE application.

HSAE Seal Design

The design designation of this product is:

HSAE

The complete technical identification is therefore:

CORTECO 19017585 NBR HSAE 35x50x9.5

The HSAE designation is an important part of product identification. A seal should not be selected solely because it has the same nominal dimensions.

Differential Shaft Seal

CORTECO 19017585 is designed as a shaft seal for differential applications.

The product may also be searched for using terms such as:

Toyota differential shaft seal
Toyota differential oil seal
35x50x9.5 differential seal
35x50x9.5 radial shaft seal
Toyota 9031035005 oil seal
Toyota 9031035010 oil seal
CORTECO 19017585 Toyota

For drivetrain components, selection based only on vehicle model may be insufficient because different differential and axle configurations can be used within the same vehicle family.

Toyota OE 9031035005

One of the principal OE references associated with CORTECO 19017585 is:

TOYOTA 9031035005

The number may also be written as:

Toyota 90310-35005

Both formats are useful for product identification and search.

When replacing an original Toyota seal carrying this reference, the CORTECO part number and technical specifications should also be verified.

Toyota OE 9031035010

The second Toyota OE reference is:

TOYOTA 9031035010

Alternative format:

Toyota 90310-35010

Both Toyota references are associated with CORTECO 19017585 / 19017585B.

For product search and identification, it is useful to retain both the compact OE number and the hyphenated Toyota format.

CORTECO 19017585 for Toyota Land Cruiser

CORTECO 19017585 is catalogued for selected Toyota Land Cruiser differential applications, including certain versions from the Land Cruiser J7 and Land Cruiser 80 / J8 families.

Depending on the specific vehicle configuration, applications may include selected petrol and diesel versions.

This does not mean that CORTECO 19017585 fits every Toyota Land Cruiser. Different axles, differentials and drivetrain configurations may be used within the same model range.

For accurate selection, verify:

Toyota OE 9031035005 or 9031035010

together with the specific vehicle configuration.

CORTECO 19017585 vs Generic 35x50x9.5 Oil Seal

Matching dimensions do not automatically establish interchangeability.

For CORTECO 19017585, the following parameters should be checked:

Dimensions: 35x50x9.5 mm
Material: NBR
Design: HSAE
Application: Differential shaft
OE: Toyota 9031035005 / 9031035010

This is particularly important when comparing CORTECO 19017585 with generic industrial radial shaft seals.

PAYEN NK122 Cross-Reference

A cross-reference associated with this product is:

PAYEN NK122

This number may help identify an alternative product when replacing an existing PAYEN seal.

Before using any cross-reference as a replacement, the complete dimensions, construction, material and application should be verified.

CORTECO 82017585 Trade Number

The product is also associated with the CORTECO trade number:

82017585

Therefore, the product may be encountered under several identifiers:

CORTECO 19017585
CORTECO 19017585B
CORTECO 82017585
HSAE

Including these identifiers on the product page helps customers searching by different catalogue references.

Selection and Interchangeability

When selecting a replacement for CORTECO 19017585 / 19017585B, verify:

• CORTECO part number 19017585 / 19017585B
• complete dimensions 35x50x9.5 mm
• inside diameter 35 mm
• outside diameter 50 mm
• width 9.5 mm
• NBR material
• HSAE design
• differential application
• Toyota OE 9031035005 or 9031035010

Matching the 35x50x9.5 mm dimensions alone does not confirm full technical interchangeability.

Technical Specification

Manufacturer / Brand: CORTECO
Part Number: 19017585
Catalogue Number: 19017585B
Trade Number: 82017585
Product Type: Differential radial shaft seal / oil seal
Design: HSAE
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 35x50x9.5 mm
Inside Diameter: 35 mm
Outside Diameter: 50 mm
Width / Height: 9.5 mm
Application: Differential
Vehicle Brand: Toyota
EAN: 3358960175854

OE Numbers and Cross-References

TOYOTA: 9031035005
TOYOTA: 90310-35005

TOYOTA: 9031035010
TOYOTA: 90310-35010

CORTECO: 19017585B
CORTECO: 82017585

PAYEN: NK122

These references should be used together with the technical specifications when identifying a replacement.

How to Select CORTECO 19017585

If the original component or Toyota parts catalogue specifies:

9031035005 or 9031035010

the next step is to verify correspondence with CORTECO 19017585 / 19017585B.

When selecting the seal by technical parameters, verify the complete combination:

35x50x9.5 mm + NBR + HSAE + Toyota OE reference

This provides a more precise identification than searching only for a 35x50x9.5 mm oil seal.

FAQ

What are the dimensions of CORTECO 19017585?

CORTECO 19017585 measures 35x50x9.5 mm: 35 mm inside diameter, 50 mm outside diameter and 9.5 mm width.

What material is CORTECO 19017585 made from?

The seal is manufactured from NBR - Nitrile Butadiene Rubber.

What is the design of CORTECO 19017585?

The design designation is HSAE.

What is CORTECO 19017585 used for?

It is a radial shaft seal for differential applications, including selected Toyota applications.

Which Toyota OE numbers correspond to CORTECO 19017585?

The Toyota OE references are 9031035005 and 9031035010.

Is Toyota 9031035005 the same as 90310-35005?

Yes. These are two formatting variants of the same Toyota OE reference.

Is Toyota 9031035010 the same as 90310-35010?

Yes. These are two formatting variants of the same Toyota OE reference.

Does CORTECO 19017585 fit Toyota Land Cruiser?

It is catalogued for selected Toyota Land Cruiser J7 and Land Cruiser 80 / J8 applications. Exact compatibility should be verified using the Toyota OE number and the specific drivetrain configuration.

Which PAYEN seal corresponds to CORTECO 19017585?

The associated PAYEN cross-reference is NK122.

Can any 35x50x9.5 oil seal replace CORTECO 19017585?

Not necessarily. In addition to dimensions, verify the NBR material, HSAE design, differential application and Toyota OE reference.

AI OVERVIEW

CORTECO 19017585 / 19017585B HSAE is an NBR differential radial shaft seal measuring 35x50x9.5 mm. It is intended for selected Toyota differential applications and corresponds to OE references Toyota 9031035005 / 90310-35005 and 9031035010 / 90310-35010. CORTECO trade number: 82017585. Cross-reference: PAYEN NK122. For accurate replacement selection, verify the complete dimensions, NBR material, HSAE design and Toyota OE number.