CORTECO 19026213 20x34x7 NBR HTCV - Radial Shaft Seal

CORTECO 19026213 20x34x7 NBR HTCV - Radial Shaft Seal

CORTECO 19026213 is an NBR radial shaft seal with HTCV design and dimensions 20x34x7 mm. It has a 20 mm inside diameter, 34 mm outside diameter and 7 mm width. CORTECO catalogue data associates reference 19026213 with HONDA applications. Correct identification should include the complete 19026213 part number, HTCV design, NBR material and exact dimensions.

CORTECO 19026213 - product characteristics

CORTECO 19026213 is a radial shaft sealing component with HTCV construction.

The key identification characteristics are:

• manufacturer: CORTECO

• part number: 19026213

• product type: radial shaft seal

• design: HTCV

• material: NBR

• inside diameter: 20 mm

• outside diameter: 34 mm

• width: 7 mm

• catalogue application: HONDA

• EAN: 3358960161543

Technical data

CORTECO 19026213 dimensions

The exact dimensions are:

20x34x7 mm

where:

• 20 mm - inside diameter

• 34 mm - outside diameter

• 7 mm - width

The dimensions are an important part of product identification, but they should not be used as the only selection criterion.

For CORTECO 19026213, the HTCV design, NBR material and complete manufacturer reference should also be verified.

What does CORTECO 19026213 NBR HTCV mean?

19026213 is the CORTECO catalogue part number identifying this specific product.

NBR identifies nitrile rubber as the elastomer material.

HTCV is the CORTECO design designation specified for this reference.

The complete technical identification is:

CORTECO 19026213 - NBR - HTCV - 20x34x7 mm

Using the complete designation reduces the risk of confusing this seal with another 20x34x7 mm product of a different construction.

NBR material

CORTECO 19026213 is manufactured from NBR, also known as nitrile rubber.

NBR is widely used in technical sealing applications, particularly where the sealing component operates in contact with mineral oils and greases.

When searching for an alternative to CORTECO 19026213, the elastomer material should therefore be checked together with the dimensions and seal construction.

HTCV seal design

CORTECO specifies the construction of reference 19026213 as:

HTCV

The design designation is an important part of the technical specification.

A conventional 20x34x7 mm oil seal with a different profile should not automatically be considered equivalent to CORTECO 19026213.

Seals with identical nominal dimensions may differ in sealing lip geometry, auxiliary sealing features, material or intended application.

CORTECO 19026213 for HONDA applications

CORTECO catalogue data associates reference 19026213 with:

HONDA

The seal is also listed in catalogues covering power steering system sealing components.

Confirmed HONDA reference numbers associated with this product include:

• HONDA 91201-PT0-003

• HONDA 91201-PT0-004

• HONDA 91216-PL6-003

Alternative formats without separators may also be encountered:

• 91201PT0003

• 91201PT0004

• 91216PL6003

Compatibility with a specific vehicle or steering assembly should be confirmed using the appropriate OE reference before installation.

Alternative designations and search references

CORTECO 19026213 may be found in catalogues and search systems under several forms:

• CORTECO 19026213

• 19026213 CORTECO

• CORTECO 19026213 NBR

• CORTECO 19026213 HTCV

• CORTECO 19026213 NBR HTCV

• CORTECO 19026213 20x34x7

• 19026213 20x34x7

• CORTECO HTCV 20x34x7

• CORTECO 20x34x7 NBR

• HONDA 91201-PT0-003

• HONDA 91201-PT0-004

• HONDA 91216-PL6-003

• 91201PT0003

• 91201PT0004

• 91216PL6003

The primary product identifier remains:

CORTECO 19026213

CORTECO 19026213 vs standard 20x34x7 oil seals

Many radial shaft seals with nominal dimensions of 20x34x7 mm are available on the market.

This does not mean that they are automatically interchangeable with CORTECO 19026213.

For this specific reference, check:

• dimensions 20x34x7 mm

• NBR material

• HTCV design

• CORTECO reference 19026213

• relevant OE reference

• requirements of the specific installation

A seal with identical dimensions but a different construction should not be treated as a direct replacement without technical verification.

Selection and interchangeability

Before purchasing CORTECO 19026213, verify:

1. CORTECO part number 19026213.

2. HTCV design.

3. NBR material.

4. Inside diameter of 20 mm.

5. Outside diameter of 34 mm.

6. Width of 7 mm.

7. OE number of the original component.

8. Requirements of the specific assembly.

Identical 20x34x7 mm dimensions alone do not guarantee full interchangeability between different radial shaft seals.

Installation

Before installation, clean the housing and inspect the mating surface.

Check:

• shaft surface condition

• absence of burrs and sharp edges

• seal housing condition

• correct installation orientation

• dimensional compatibility

Protect the sealing element from damage during installation.

The seal should be pressed evenly and axially into its housing. Avoid tilting, impact damage or permanent deformation of the seal.

FAQ

What are the dimensions of CORTECO 19026213?

CORTECO 19026213 has dimensions of 20x34x7 mm: 20 mm inside diameter, 34 mm outside diameter and 7 mm width.

What material is CORTECO 19026213 made from?

The seal is manufactured from NBR, also known as nitrile rubber.

What design is CORTECO 19026213?

CORTECO specifies the design of this reference as HTCV.

Is CORTECO 19026213 intended for HONDA applications?

Yes. CORTECO catalogue data associates reference 19026213 with HONDA. Compatibility with a specific vehicle should additionally be confirmed by the relevant OE number.

Which HONDA references correspond to CORTECO 19026213?

Associated HONDA references include 91201-PT0-003, 91201-PT0-004 and 91216-PL6-003.

Can a standard 20x34x7 oil seal replace CORTECO 19026213?

Interchangeability should not be assumed solely from dimensions. The HTCV construction, NBR material and requirements of the specific application must also be checked.

What is the EAN of CORTECO 19026213?

The EAN for CORTECO 19026213 is 3358960161543.

Is CORTECO 19026213 used in power steering systems?

Reference 19026213 appears in catalogues covering power steering sealing components and is associated with HONDA applications. The exact installation position should be verified using the OE reference.

CORTECO 19026213 - quick technical answer

CORTECO 19026213 is an NBR radial shaft seal with HTCV design and dimensions 20x34x7 mm. CORTECO catalogue data associates this reference with HONDA applications. When selecting a replacement, verify the complete 19026213 reference, HTCV construction, NBR material and relevant OE number, because identical dimensions alone do not guarantee interchangeability.

CORTECO 19026213 available from simmering.pl

CORTECO 19026213 NBR HTCV is available from simmering.pl, a specialist supplier of radial shaft seals, technical sealing solutions and bearings for industrial and technical customers.

Stock and technical service are located in Lublin, Poland. Products are shipped worldwide from stock in Poland.

For correct identification, compare the complete CORTECO 19026213 reference, HTCV design, NBR material, 20x34x7 mm dimensions and relevant OE reference before ordering.