CORTECO 19034801 ACM TB2 62x85x12 mm Radial Shaft Seal

CORTECO 19034801 ACM TB2 62x85x12 mm Radial Shaft Seal

CORTECO 19034801 is an ACM radial shaft seal with dimensions 62x85x12 mm and CORTECO profile TB2. The seal has a 62 mm inside diameter, 85 mm outside diameter and 12 mm width. It is designed for sealing a rotating shaft with a nominal diameter of 62 mm in an 85 mm housing bore. A confirmed OEM reference is KOMATSU 0701200062.

Technical Data - CORTECO 19034801

What Does CORTECO 19034801 ACM TB2 Mean?

19034801 is the CORTECO reference identifying this specific radial shaft seal.

ACM identifies the elastomer material. ACM is polyacrylate rubber, an elastomer used for technical sealing applications.

TB2 is the CORTECO profile designation assigned to this seal construction.

When identifying an alternative seal, TB2 should be treated as an important part of the complete technical specification.

The individual letters and numbers in the TB2 designation should not be decoded using nomenclature from other seal manufacturers unless equivalence is confirmed by appropriate CORTECO technical documentation.

ACM Polyacrylate Rubber

CORTECO 19034801 is manufactured from ACM polyacrylate rubber.

ACM is an elastomer used in technical sealing applications, particularly where suitable performance in contact with oils and at elevated temperatures is required.

Material specification is important when selecting a radial shaft seal.

An NBR, FKM or other elastomer seal measuring 62x85x12 mm should not automatically be considered a direct replacement for CORTECO 19034801.

Material selection should take into account:

• operating medium,
• operating temperature,
• shaft speed,
• seal arrangement,
• equipment manufacturer requirements,
• environmental conditions.

A universal temperature range should not be assigned to this specific CORTECO reference solely on the basis of general ACM material data. Actual operating limits depend on the specific compound and application conditions.

CORTECO 19034801 Dimensions

Confirmed dimensions are:

• inside diameter: 62 mm
• outside diameter: 85 mm
• width: 12 mm

Complete dimensions:

62x85x12 mm

The 62 mm inside diameter corresponds to the nominal shaft diameter, while the 85 mm outside diameter corresponds to the nominal housing bore.

CORTECO TB2 Seal Profile

CORTECO specifies the construction of reference 19034801 as TB2.

This profile designation is important for technical identification because two radial shaft seals with identical dimensions of 62x85x12 mm may have different constructions.

Seals with the same nominal dimensions may differ in:

• elastomer material,
• sealing lip geometry,
• external construction,
• additional sealing elements,
• intended operating conditions.

For this reason:

CORTECO 19034801 ACM TB2 62x85x12 mm

is a much more precise product identification than simply:

62x85x12 oil seal

CORTECO 19034801 vs Other 62x85x12 Oil Seals

The size 62x85x12 mm is not unique to one seal construction.

Different radial shaft seals may share these basic dimensions while having different materials, profiles and functional characteristics.

Potential differences include:

• elastomer material,
• seal profile,
• sealing lip geometry,
• additional sealing elements,
• application requirements,
• operating conditions.

When replacing CORTECO 19034801, the complete specification should therefore be compared rather than relying only on the dimensions.

KOMATSU 0701200062 OEM Reference

A confirmed OEM reference associated with CORTECO 19034801 is:

KOMATSU 0701200062

This reference can be useful when identifying the seal for KOMATSU machinery or assemblies.

It does not mean that the seal is suitable for every KOMATSU machine. Compatibility with a particular machine should be confirmed using the OEM number, machine model, serial number or original equipment documentation.

Alternative References and Search Terms

The product may be searched using several reference combinations:

CORTECO 19034801

19034801 CORTECO

CORTECO 82034801

82034801 CORTECO

CORTECO TB2 62x85x12

CORTECO 19034801 ACM

CORTECO 19034801 TB2

CORTECO 19034801 62x85x12

19034801 ACM TB2

ACM oil seal 62x85x12

radial shaft seal 62x85x12 ACM

Simmerring 62x85x12 ACM

KOMATSU 0701200062

Searching by the CORTECO reference or confirmed OEM number is generally more precise than searching by dimensions alone.

How to Select a Replacement for CORTECO 19034801

When selecting an alternative radial shaft seal, verify at least:

• shaft diameter 62 mm,
• housing bore diameter 85 mm,
• width 12 mm,
• ACM material,
• TB2 construction,
• operating medium,
• operating temperature,
• shaft speed,
• direction of rotation where relevant,
• shaft surface condition,
• equipment manufacturer requirements.

If the seal is being selected for KOMATSU equipment, 0701200062 provides an additional identification reference.

Can an NBR 62x85x12 Seal Replace CORTECO 19034801 ACM?

This should not be assumed based on dimensions alone.

CORTECO 19034801 is specified in ACM. NBR and ACM are different elastomer groups and can provide different performance depending on temperature, oil type and other operating conditions.

If the original application requires ACM, substitution with NBR should only be made after confirming technical compatibility with the specific application.

Can an FKM 62x85x12 Seal Be Used Instead?

Again, identical dimensions do not establish interchangeability.

FKM and ACM are different elastomer groups.

Even when an FKM seal has dimensions of 62x85x12 mm, its construction, profile, operating medium and application requirements should be compared before it is considered an alternative.

Installation Recommendations

Before installing a new radial shaft seal, inspect both the shaft and housing bore.

The shaft sealing surface should be free from:

• corrosion,
• burrs,
• sharp edges,
• deep wear tracks,
• contamination that could damage the sealing lip.

During installation, protect the sealing lip from threads, splines, grooves and other sharp shaft features.

The seal should be installed evenly using a suitable mounting tool. Installation force should not be transmitted through the flexible sealing lip.

Correct installation is essential for achieving the intended sealing performance and service life.

FAQ

What are the dimensions of CORTECO 19034801?

CORTECO 19034801 measures 62x85x12 mm. The inside diameter is 62 mm, outside diameter 85 mm and width 12 mm.

What material is CORTECO 19034801 made from?

The seal is manufactured from ACM, or polyacrylate rubber.

What is the profile of CORTECO 19034801?

The CORTECO profile designation for this reference is TB2.

What is the OEM reference for CORTECO 19034801?

A confirmed OEM reference is KOMATSU 0701200062.

What is the EAN for CORTECO 19034801?

The EAN is 3358960347237.

Is every 62x85x12 oil seal interchangeable with CORTECO 19034801?

No. Identical dimensions do not guarantee interchangeability. Material, seal construction, profile and application requirements should also be checked. CORTECO 19034801 is specified as ACM TB2 62x85x12 mm.

Can an NBR seal replace the ACM version?

Not automatically. NBR and ACM have different material properties. Compatibility with the operating medium, temperature and application must be verified before changing the elastomer material.

How should I search for CORTECO 19034801?

The most precise search is CORTECO 19034801. Other useful identifiers include 62x85x12 mm, ACM, TB2, commercial reference 82034801 and OEM reference KOMATSU 0701200062.

CORTECO 19034801 - Quick Answer

CORTECO 19034801 is an ACM radial shaft seal measuring 62x85x12 mm with CORTECO profile TB2. It has a 62 mm inside diameter, 85 mm outside diameter and 12 mm width. The confirmed OEM reference is KOMATSU 0701200062, and the EAN is 3358960347237. Complete specifications should be compared when selecting an alternative.

Available from simmering.pl, a specialist supplier of radial shaft seals, O-rings, bearings and industrial sealing solutions. Products are shipped from stock in Poland to customers across Europe and worldwide.