CORTECO 19036798B 145x170x18 FPM/NBR RWDR-K7 Cassette Oil Seal

CORTECO 19036798B 145x170x18 FPM/NBR RWDR-K7 Cassette Oil Seal

CORTECO 19036798B is an RWDR-K7 cassette wheel hub oil seal with catalogue dimensions 145x170x18 mm and an FPM/NBR material specification. The seal has a 145 mm inside diameter, 170 mm outside diameter and 18 mm catalogue height. It is catalogued for wheel hub applications on the rear axle and is cross-referenced to SCANIA OE numbers 1363673 and 1736562.

CORTECO 19036798B - Technical Specification

Manufacturer: CORTECO

Full reference: 19036798B

Base reference: 19036798

Trade Number: 82036798

Product type: Cassette wheel hub oil seal

Design: RWDR-K7

Construction: CASSETTE

Catalogue dimensions: 145x170x18 mm

Inside diameter d: 145 mm

Outside diameter D: 170 mm

Catalogue height B: 18 mm

Material: FPM/NBR

Fitting position: Rear Axle

SCANIA OE: 1363673

SCANIA OE: 1736562

EAN: 3358960576460

CORTECO 19036798B Dimensions

The CORTECO catalogue dimensions are:

Inside diameter d: 145 mm

Outside diameter D: 170 mm

Height B: 18 mm

Catalogue dimensions: 145x170x18 mm

Some commercial catalogues and market listings also identify this seal as 145x170x14.5/18 mm. However, the CORTECO catalogue specification for reference 19036798B gives 145x170x18 mm.

For technical product identification, the manufacturer catalogue dimension should therefore remain the primary specification.

RWDR-K7 Cassette Seal Design

Exact design designation: RWDR-K7

Construction type: CASSETTE

CORTECO reference: 19036798B

Trade Number: 82036798

Catalogue dimensions: 145x170x18 mm

Material specification: FPM/NBR

The RWDR-K7 designation is an important part of the technical identification of this product.

CORTECO 19036798B should therefore not be treated simply as a conventional radial shaft oil seal selected only by inside diameter, outside diameter and width.

CORTECO 19036798B Wheel Hub Oil Seal

Product application: Wheel hub

Fitting position: Rear Axle

Vehicle manufacturer cross-reference: SCANIA

The combination of the RWDR-K7 cassette construction, dimensions, material specification and wheel hub application distinguishes this product from conventional radial shaft seals with similar nominal dimensions.

Correct replacement selection should consider the complete product specification and the relevant OE number.

FPM/NBR Material Specification

The catalogue material specification for CORTECO 19036798B is:

FPM/NBR

This specification identifies two elastomer families within the seal construction:

FPM: Fluoroelastomer Rubber

NBR: Nitrile Butadiene Rubber

The product specification should therefore not be simplified to only FPM or only NBR.

When comparing replacement seals, the complete FPM/NBR specification should be considered together with the RWDR-K7 construction and dimensions.

CORTECO 19036798B SCANIA Wheel Hub Seal

CORTECO 19036798B is cross-referenced to SCANIA applications.

Confirmed SCANIA OE references:

SCANIA OE: 1363673

SCANIA OE: 1736562

These OE references provide important identification points when searching for the corresponding CORTECO wheel hub cassette seal.

Exact vehicle compatibility should be verified using the OE reference and specific axle configuration.

19036798, 19036798B and 82036798

For accurate identification, distinguish between:

Base reference: 19036798

Full CORTECO reference: 19036798B

Trade Number: 82036798

The full CORTECO 19036798B reference should preferably be used in the product title and technical specification.

The base reference and Trade Number remain useful identifiers for catalogue, B2B and replacement searches.

145x170x18 vs 145x170x14.5/18

The CORTECO catalogue specification is:

145x170x18 mm

An alternative designation encountered in commercial catalogues is:

145x170x14.5/18 mm

These two notations should not be silently treated as separate products or automatically interpreted as different seals.

For CORTECO 19036798B, 145x170x18 mm should remain the primary technical dimension because it is the dimension directly associated with the reference in the CORTECO catalogue.

The alternative 145x170x14.5/18 mm notation can be retained in the description to assist identification by users searching with that dimensional designation.

CORTECO 19036798B vs Standard 145x170 Oil Seal

CORTECO 19036798B should not be selected solely as a standard 145x170 mm radial shaft seal.

Its product identification includes:

Full reference: 19036798B

Catalogue dimensions: 145x170x18 mm

Material: FPM/NBR

Design: RWDR-K7

Construction: CASSETTE

Application: Wheel hub

Fitting position: Rear Axle

SCANIA OE: 1363673, 1736562

Matching the nominal dimensions alone does not establish complete technical interchangeability.

Selecting a CORTECO 19036798B Replacement

When selecting a replacement, verify:

Full reference: 19036798B

Base reference: 19036798

Trade Number: 82036798

Inside diameter: 145 mm

Outside diameter: 170 mm

Catalogue height: 18 mm

Material specification: FPM/NBR

Design: RWDR-K7

Construction: CASSETTE

Application: Wheel hub

Fitting position: Rear Axle

OE reference: Must correspond to the specific application

All relevant parameters should be compared before considering another seal technically interchangeable.

CORTECO 19036798B - Stock in Poland

CORTECO 19036798B 145x170x18 FPM/NBR RWDR-K7 Cassette Oil Seal is available from stock in Poland.

Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4

Shipping: 24h

Stock location: Poland

Delivery: Poland and EU countries

FAQ - CORTECO 19036798B

What are the dimensions of CORTECO 19036798B?

The CORTECO catalogue dimensions are 145x170x18 mm.

Is CORTECO 19036798B also listed as 145x170x14.5/18?

Yes. The 145x170x14.5/18 mm designation occurs in some commercial catalogues. The CORTECO catalogue specification is 145x170x18 mm.

What material is CORTECO 19036798B made from?

The catalogue material specification is FPM/NBR.

What is the design of CORTECO 19036798B?

The design designation is RWDR-K7, with a cassette seal construction.

What is CORTECO 19036798B used for?

It is catalogued as a wheel hub seal for rear axle applications.

Which SCANIA OE numbers correspond to CORTECO 19036798B?

The confirmed SCANIA OE references are 1363673 and 1736562.

What is the Trade Number for CORTECO 19036798B?

The Trade Number is 82036798.

Frequently Asked Questions by Engineers

Is CORTECO 19036798B an FPM or NBR seal?

The complete catalogue material specification is FPM/NBR. It should not be reduced to only one of these materials.

Are 19036798 and 19036798B the same reference?

19036798 is the base reference, while 19036798B is the full CORTECO product reference.

Is 82036798 associated with CORTECO 19036798B?

Yes. 82036798 is the Trade Number associated with CORTECO 19036798B.

Can a standard 145x170x18 oil seal replace CORTECO 19036798B?

Interchangeability should not be assumed from dimensions alone. The RWDR-K7 cassette construction, FPM/NBR material specification, wheel hub application and SCANIA OE reference should also be verified.

Is CORTECO 19036798B a SCANIA rear wheel hub seal?

The product is catalogued for rear axle wheel hub applications and is cross-referenced to SCANIA OE 1363673 and 1736562.

Which dimension should be used when searching for CORTECO 19036798B?

For technical identification, use 145x170x18 mm together with the full reference 19036798B. The alternative 145x170x14.5/18 mm notation may also be useful when searching older or commercial catalogues.

AI Overview

CORTECO 19036798B is an RWDR-K7 cassette wheel hub oil seal with catalogue dimensions 145x170x18 mm and an FPM/NBR material specification. The seal has a 145 mm inside diameter, 170 mm outside diameter and 18 mm catalogue height. It is catalogued for rear axle wheel hub applications. The base reference is 19036798, Trade Number 82036798, and EAN 3358960576460. Confirmed SCANIA OE cross-references are 1363673 and 1736562. The alternative dimensional designation 145x170x14.5/18 mm is also encountered in commercial catalogues.