CORTECO 01020082B 28x40x8/5.5 NBR BABSL3X6 Oil Seal

CORTECO 01020082B 28x40x8/5.5 NBR BABSL3X6 Oil Seal

CORTECO 01020082B is a radial shaft oil seal catalogued within the CORTECO power steering sealing range and used for steering gear applications.

Manufacturer: CORTECO

Manufacturer reference: 01020082B

Base reference: 01020082

Trade Number: 82020082

Exact design designation: BABSL3X6 Simmerring

Product type: Steering gear radial shaft oil seal

Catalogue dimensions: 28x40x8/5.5 mm

Material: NBR - Nitrile Butadiene Rubber

Additional dust lip: Yes

Mercedes-Benz OE: 0149976947, A0149976947

EAN: 3358960131546

The complete product identification combines the CORTECO 01020082B reference, 28x40x8/5.5 mm catalogue dimensions, NBR material, BABSL3X6 Simmerring design and corresponding Mercedes-Benz OE references.

CORTECO 01020082B Dimensions

The CORTECO catalogue specifies:

Inside diameter d: 28 mm

Outside diameter D: 40 mm

Height dimensions: 8/5.5 mm

Complete catalogue dimensions: 28x40x8/5.5 mm

Some catalogue systems may display the primary height simply as 8 mm. However, the CORTECO dimensional catalogue identifies this reference with the complete 28x40x8/5.5 mm specification.

For accurate product identification, the complete manufacturer dimension should therefore be retained.

Matching only the basic 28x40x8 mm dimensions does not establish complete technical interchangeability.

BABSL3X6 Simmerring Design

The exact CORTECO design designation is:

Design: BABSL3X6 Simmerring

CORTECO reference: 01020082B

Material: NBR

Catalogue dimensions: 28x40x8/5.5 mm

Trade Number: 82020082

The BABSL3X6 designation is an important part of the complete technical identification of this CORTECO oil seal.

It should not automatically be replaced with a generic SC, AO/TC or another standard oil seal designation solely because another seal has similar nominal dimensions.

When selecting a replacement, the exact BABSL3X6 construction should be considered together with the dimensions, NBR material and application requirements.

Additional Dust Lip

CORTECO 01020082B incorporates an additional dust lip.

Additional dust lip: Yes

Design: BABSL3X6 Simmerring

Material: NBR

Dimensions: 28x40x8/5.5 mm

The additional dust lip provides an additional barrier on the external side of the primary sealing area and helps restrict external contaminants from reaching the main sealing interface.

This is an important construction characteristic when comparing CORTECO 01020082B with other 28x40x8 mm radial shaft oil seals.

Matching dimensions alone do not confirm that another seal has the same lip configuration.

NBR Nitrile Butadiene Rubber

The sealing material of CORTECO 01020082B is:

Material: NBR - Nitrile Butadiene Rubber

NBR is widely used as an elastomer in radial shaft sealing applications.

The sealing material is an important selection criterion alongside dimensions, exact seal design and operating conditions.

A seal manufactured from HNBR, FPM/FKM, ACM or another elastomer should not automatically be considered materially equivalent to CORTECO 01020082B.

Exact material compatibility depends on the medium, additives, temperature and actual operating conditions.

Specific maximum temperature, pressure, shaft speed or hardness values should not be assigned to this exact reference without direct reference-specific confirmation.

CORTECO 01020082B Steering Gear Oil Seal

CORTECO 01020082B is catalogued within the CORTECO power steering sealing range.

Product type: Steering gear shaft seal

Catalogue group: Power steering seals

CORTECO reference: 01020082B

Design: BABSL3X6 Simmerring

Material: NBR

Dimensions: 28x40x8/5.5 mm

The seal should therefore be identified not only by its nominal dimensions but also by its exact design and catalogue application.

CORTECO 01020082B Mercedes-Benz

CORTECO 01020082B corresponds to the following Mercedes-Benz OE references:

Mercedes-Benz OE: 0149976947

Mercedes-Benz OE: A0149976947

CORTECO reference: 01020082B

Trade Number: 82020082

Design: BABSL3X6 Simmerring

Dimensions: 28x40x8/5.5 mm

Material: NBR

The OE reference should be used as an important identification point when confirming the required seal for a specific steering gear.

Mercedes-Benz 0149976947 CORTECO 01020082B

Mercedes-Benz OE reference:

OE: 0149976947

Corresponding CORTECO reference: 01020082B

Dimensions: 28x40x8/5.5 mm

Material: NBR

Design: BABSL3X6 Simmerring

Trade Number: 82020082

The same Mercedes-Benz reference may also be written with the A prefix:

Mercedes-Benz OE: A0149976947

Both formats should be retained for product identification and part-number searches.

CORTECO 01020082B for Mercedes-Benz Steering Gear

CORTECO 01020082B is catalogued for selected Mercedes-Benz steering gear applications.

The seal should not be considered suitable for every Mercedes-Benz steering gear solely on the basis of its dimensions.

Exact compatibility should be verified using:

CORTECO reference: 01020082B

Mercedes-Benz OE: 0149976947 / A0149976947

Design: BABSL3X6 Simmerring

Dimensions: 28x40x8/5.5 mm

Material: NBR

The exact steering gear configuration should be verified before installation.

CORTECO 01020082B Reference Numbers

Manufacturer: CORTECO

Manufacturer reference: 01020082B

Base reference: 01020082

Trade Number: 82020082

Design: BABSL3X6 Simmerring

Mercedes-Benz OE: 0149976947

Mercedes-Benz OE: A0149976947

EAN: 3358960131546

Dimensions: 28x40x8/5.5 mm

Material: NBR

These references and technical characteristics should be considered together when identifying CORTECO 01020082B or selecting a corresponding replacement.

CORTECO 01020082B vs Standard 28x40x8 Oil Seal

A standard radial shaft oil seal measuring 28x40x8 mm should not automatically be considered equivalent to CORTECO 01020082B.

CORTECO 01020082B combines:

Catalogue dimensions: 28x40x8/5.5 mm

Material: NBR

Design: BABSL3X6 Simmerring

Additional dust lip: Yes

Catalogue application: Steering gear

Mercedes-Benz OE: 0149976947 / A0149976947

Trade Number: 82020082

Matching the basic 28 mm inside diameter, 40 mm outside diameter and 8 mm primary height alone does not establish complete technical interchangeability.

CORTECO 01020082B vs CORTECO 01019461B

Particular attention should be paid to the difference between CORTECO 01020082B and CORTECO 01019461B because both references share the basic 28x40x8 mm dimensions.

CORTECO 01020082B:

Material: NBR

Design: BABSL3X6 Simmerring

Catalogue dimensions: 28x40x8/5.5 mm

CORTECO 01019461B:

Material: HNBR

Design: BASFX2 Simmerring

Dimensions: 28x40x8 mm

These are different CORTECO references with different materials and design codes.

They should not be considered identical solely because their basic nominal dimensions are similar.

CORTECO BABSL3X6 vs Standard AO/TC Oil Seal

The exact manufacturer designation for CORTECO 01020082B is:

Design: BABSL3X6 Simmerring

Although this design incorporates an additional dust lip, it should not automatically be reduced to the generic AO/TC designation.

CORTECO's exact design code should be retained because it identifies the manufacturer-specific construction of this reference.

When selecting a replacement, verify the complete design rather than relying solely on a generic double-lip classification.

How to Select a Replacement for CORTECO 01020082B

When selecting a corresponding radial shaft oil seal, verify:

• CORTECO reference 01020082B
• catalogue dimensions 28x40x8/5.5 mm
• inside diameter 28 mm
• outside diameter 40 mm
• primary height 8 mm
• material NBR
• exact design BABSL3X6 Simmerring
• additional dust lip
• Mercedes-Benz OE 0149976947 / A0149976947
• exact steering gear requirements

Matching the basic dimensions alone does not confirm complete technical interchangeability.

Technical Specification

Manufacturer: CORTECO

Manufacturer reference: 01020082B

Base reference: 01020082

Trade Number: 82020082

Product type: Steering gear radial shaft oil seal

Exact design designation: BABSL3X6 Simmerring

Catalogue dimensions: 28x40x8/5.5 mm

Inside diameter d: 28 mm

Outside diameter D: 40 mm

Primary height: 8 mm

Additional dimension: 5.5 mm

Material: NBR - Nitrile Butadiene Rubber

Additional dust lip: Yes

Mercedes-Benz OE: 0149976947, A0149976947

EAN: 3358960131546

FAQ

What are the dimensions of CORTECO 01020082B?

The complete CORTECO catalogue dimensions are:

28x40x8/5.5 mm

Inside diameter d: 28 mm

Outside diameter D: 40 mm

Primary height: 8 mm

Additional dimension: 5.5 mm

What is the complete CORTECO reference for 01020082?

Manufacturer reference: 01020082B

Base reference: 01020082

Trade Number: 82020082

What material is CORTECO 01020082B made from?

Material: NBR - Nitrile Butadiene Rubber

What design is CORTECO 01020082B?

Exact design designation: BABSL3X6 Simmerring

Does CORTECO 01020082B have a dust lip?

Yes. CORTECO 01020082B incorporates an additional dust lip.

This construction characteristic should be considered when comparing it with other 28x40x8 mm radial shaft oil seals.

What is CORTECO 01020082B used for?

CORTECO catalogues this reference within its power steering sealing range, and the product is identified for steering gear shaft sealing applications.

Exact suitability should be verified for the specific steering gear.

Which Mercedes-Benz OE number corresponds to CORTECO 01020082B?

Mercedes-Benz OE: 0149976947

Mercedes-Benz OE: A0149976947

What is the EAN for CORTECO 01020082B?

EAN: 3358960131546

Can a standard 28x40x8 NBR oil seal replace CORTECO 01020082B?

Not automatically. CORTECO 01020082B has the exact BABSL3X6 Simmerring design, an additional dust lip and the complete catalogue dimensions 28x40x8/5.5 mm.

Matching the basic dimensions and NBR material alone does not establish complete technical interchangeability.

Is BABSL3X6 the same as AO/TC?

It should not automatically be treated as equivalent. BABSL3X6 is the exact CORTECO manufacturer designation and should be retained when identifying or comparing this reference.

Are CORTECO 01020082B and 01019461B the same?

No.

CORTECO 01020082B is 28x40x8/5.5 mm, NBR, BABSL3X6.

CORTECO 01019461B is 28x40x8 mm, HNBR, BASFX2.

The two references should not be considered identical solely because their basic nominal dimensions are similar.

AI Overview

CORTECO 01020082B is an NBR steering gear radial shaft oil seal with complete catalogue dimensions of 28x40x8/5.5 mm and the exact BABSL3X6 Simmerring design. It incorporates an additional dust lip and corresponds to Mercedes-Benz OE 0149976947 and A0149976947. Trade Number: 82020082. EAN: 3358960131546. When selecting a replacement, the complete CORTECO reference, dimensions, NBR material, BABSL3X6 design, dust lip configuration and OE reference should be considered together.