CORTECO 01029660B is an FPM wheel hub shaft oil seal measuring 95x115x13 mm. Design: B1BAVISLDRWX2 / B1BASLDRWX2 Simmerring. Inside diameter: 95 mm, outside diameter: 115 mm, width: 13 mm. Additional dust lip: yes. Swirl type: Alternating Twist. Base reference: 01029660. Trade Number: 82029660. Mercedes-Benz OE: 0219970047 / A0219970047. EAN: 3358960133236.
Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4. 24h Shipping. Available from stock in Poland for delivery across the EU.
CORTECO 01029660B is an FPM radial shaft oil seal measuring 95x115x13 mm. Older CORTECO catalogue data identify the construction as B1BAVISLDRWX2, while current product data use B1BASLDRWX2 Simmerring. The seal incorporates an additional dust lip and Alternating Twist sealing geometry.
Manufacturer: CORTECO
Part number: 01029660B
Base reference: 01029660
Trade Number: 82029660
Product type: Radial shaft oil seal
Catalogue application: Wheel hub
Fitting position: Rear axle
Older design designation: B1BAVISLDRWX2
Current designation: B1BASLDRWX2 Simmerring
Material: FPM - Fluoroelastomer
Dimensions: 95x115x13 mm
Inside diameter d: 95 mm
Outside diameter D: 115 mm
Width B: 13 mm
Additional dust lip: Yes
Swirl type: Alternating Twist
Mercedes-Benz OE: 0219970047 / A0219970047
EAN: 3358960133236
The principal dimensions are:
Inside diameter d: 95 mm
Outside diameter D: 115 mm
Width B: 13 mm
Complete dimensions: 95x115x13 mm
CORTECO catalogue data directly associate reference 01029660B with the 95x115x13 mm dimensions, FPM material and B1BAVISLDRWX2 construction.
All three dimensions should be checked together with the material, seal design, lip configuration and sealing geometry when selecting a replacement.
Matching dimensions alone do not establish complete technical interchangeability.
The sealing material of CORTECO 01029660B is:
FPM - Fluoroelastomer
Material is an important selection criterion alongside dimensions, construction, lip configuration and directional sealing geometry.
An NBR, ACM or other elastomer seal measuring 95x115x13 mm should not automatically be considered technically equivalent to this FPM version.
Exact material compatibility depends on the medium, temperature and actual operating conditions.
Older CORTECO catalogue data specify the exact design as:
B1BAVISLDRWX2
Complete identification:
CORTECO 01029660B
Base reference: 01029660
Dimensions: 95x115x13 mm
Material: FPM
Design: B1BAVISLDRWX2
The B1BAVISLDRWX2 designation is an important part of the technical identification and should be retained when searching for the product, identifying existing stock or comparing potential replacements.
Two design descriptions can be encountered for CORTECO 01029660B:
B1BAVISLDRWX2 - older CORTECO catalogue designation
B1BASLDRWX2 Simmerring - current product designation
Trade Number: 82029660
Both design identifiers are useful because older catalogues and stock records may use B1BAVISLDRWX2, while current electronic parts databases may identify the same reference as B1BASLDRWX2 Simmerring.
The manufacturer reference 01029660B remains the primary product identifier.
CORTECO 01029660B incorporates an additional dust lip.
The additional lip provides a secondary barrier on the external side of the primary sealing area and helps restrict contaminants from reaching the main sealing interface.
This characteristic should be considered when comparing CORTECO 01029660B with other 95x115x13 mm radial shaft oil seals.
A seal with identical dimensions but a different lip configuration should not automatically be considered technically equivalent.
CORTECO 01029660B is specified with:
Alternating Twist
This means the reference uses alternating directional sealing geometry rather than being classified solely as a left-hand or right-hand twist version.
The sealing geometry is part of the technical construction of the product and should be considered when selecting a corresponding replacement.
CORTECO 01029660B is catalogued as a wheel hub shaft seal.
Fitting position:
Rear axle
The reference is associated with Mercedes-Benz commercial vehicle applications, including Mercedes-Benz Vario applications.
For a specific vehicle, compatibility should be verified using the OE reference and exact vehicle or axle data.
The principal Mercedes-Benz OE reference associated with CORTECO 01029660B is:
0219970047
The Mercedes-Benz prefixed format is:
A0219970047
Therefore, the following search forms can be encountered:
Mercedes-Benz 0219970047
Mercedes-Benz A0219970047
Both forms refer to the same OE reference.
OE identification should be checked against the specific vehicle and axle configuration before installation.
Different forms of the CORTECO reference can be encountered:
01029660 - base reference
01029660B - complete/current CORTECO reference
82029660 - Trade Number
Useful technical search identifiers include:
CORTECO 01029660
CORTECO 01029660B
CORTECO 82029660
B1BAVISLDRWX2
B1BASLDRWX2
95x115x13 FPM
Mercedes-Benz 0219970047
Different radial shaft oil seals can share the nominal dimensions 95x115x13 mm.
This does not establish technical interchangeability with CORTECO 01029660B.
When comparing a possible replacement, verify:
Dimensions: 95x115x13 mm
Material: FPM
Design: B1BAVISLDRWX2 / B1BASLDRWX2
Additional dust lip
Alternating Twist sealing geometry
OE reference
Fitting position
Specific axle or wheel hub requirements
Matching dimensions alone are insufficient to confirm interchangeability.
When identifying or selecting this oil seal, verify:
Manufacturer: CORTECO
Part number: 01029660B
Base reference: 01029660
Trade Number: 82029660
Dimensions: 95x115x13 mm
Material: FPM
Design: B1BAVISLDRWX2 / B1BASLDRWX2 Simmerring
Additional dust lip: Yes
Swirl type: Alternating Twist
Catalogue application: Wheel hub
Fitting position: Rear axle
Mercedes-Benz OE reference
Specific vehicle and axle data
The complete technical specification should be considered rather than dimensions alone.
Manufacturer: CORTECO
Part number: 01029660B
Base reference: 01029660
Trade Number: 82029660
Product type: Radial shaft oil seal
Catalogue application: Wheel hub
Fitting position: Rear axle
Older design designation: B1BAVISLDRWX2
Current designation: B1BASLDRWX2 Simmerring
Material: FPM - Fluoroelastomer
Dimensions: 95x115x13 mm
Inside diameter d: 95 mm
Outside diameter D: 115 mm
Width B: 13 mm
Additional dust lip: Yes
Swirl type: Alternating Twist
Mercedes-Benz OE: 0219970047 / A0219970047
EAN: 3358960133236
The seal measures 95x115x13 mm: 95 mm inside diameter, 115 mm outside diameter and 13 mm width.
The sealing material is FPM - Fluoroelastomer.
Older CORTECO catalogue data identify the design as B1BAVISLDRWX2. Current product data use B1BASLDRWX2 Simmerring.
Yes. It incorporates an additional dust lip.
The swirl type is Alternating Twist.
It is catalogued as a wheel hub shaft seal with the fitting position specified as the rear axle.
The associated OE reference is Mercedes-Benz 0219970047, also written as A0219970047.
The Trade Number is 82029660.
The EAN is 3358960133236.
Not automatically. The exact design, FPM material, additional dust lip, Alternating Twist geometry, OE reference and application requirements should also be verified.
CORTECO 01029660B is an FPM wheel hub shaft oil seal measuring 95x115x13 mm. Older CORTECO catalogue data identify the design as B1BAVISLDRWX2, while current data use B1BASLDRWX2 Simmerring. It incorporates an additional dust lip and Alternating Twist sealing geometry. Mercedes-Benz OE: 0219970047 / A0219970047.
Data sheet
You might also like