CORTECO 01031631B 55x80x8 FPM BAVISLX7 Radial Shaft Oil Seal

CORTECO 01031631B 55x80x8 FPM BAVISLX7 Radial Shaft Oil Seal

CORTECO 01031631B, base reference 01031631, is a radial shaft oil seal with exact dimensions of 55x80x8 mm. The sealing material is FPM - Fluoroelastomer Rubber, and the exact CORTECO design designation is BAVISLX7. The seal incorporates an additional dust lip and is catalogued for applications including transfer case and auxiliary drive shafts.

CORTECO 01031631B - Technical Specification

Manufacturer: CORTECO

Full reference: 01031631B

Base reference: 01031631

Trade Number: 82031631

Product type: Radial shaft oil seal

Design: BAVISLX7

Material: FPM - Fluoroelastomer Rubber

Dimensions: 55x80x8 mm

Inside diameter d: 55 mm

Outside diameter D: 80 mm

Width B: 8 mm

Dust lip: Yes

EAN: 3358960134950

CORTECO 01031631B Dimensions

The exact dimensions are:

d = 55 mm - inside diameter / nominal shaft diameter

D = 80 mm - outside diameter

B = 8 mm - width

Complete dimensions:

55x80x8 mm

All three dimensions should be verified when identifying or selecting a replacement.

Matching the 55x80x8 mm dimensions alone does not establish complete technical interchangeability. Material, seal design and lip configuration should also be considered.

BAVISLX7 Oil Seal Design

The exact CORTECO design designation associated with reference 01031631B is:

BAVISLX7

The complete technical identification is:

CORTECO 01031631B

55x80x8 mm

FPM

BAVISLX7

Additional dust lip

The BAVISLX7 designation is an important identification parameter when comparing this product with other 55x80x8 mm radial shaft seals.

A seal with identical dimensions but a different design designation should not automatically be considered technically equivalent.

Additional Dust Lip

CORTECO 01031631B incorporates an:

additional dust lip

The dust lip forms a secondary barrier on the external side of the primary sealing area.

Its function is to help limit the ingress of external contamination such as dust, dirt and fine particles into the main sealing zone.

The dust lip configuration should therefore be considered when selecting a replacement for CORTECO 01031631B.

FPM - Fluoroelastomer Rubber

The specified sealing material for CORTECO 01031631B is:

FPM - Fluoroelastomer Rubber

FPM is an elastomer widely used in technical radial shaft seals for applications involving compatible oils and other suitable operating media.

For CORTECO 01031631B, FPM forms part of the exact product specification.

An NBR or ACM seal with identical 55x80x8 mm dimensions should not automatically be considered an equivalent replacement.

CORTECO 01031631B Applications

CORTECO 01031631B is catalogued for applications including:

Transfer case shaft

Auxiliary drive shaft

The exact installation position depends on the specific vehicle, machine and transmission or drive assembly.

For this reason, the OE reference and application catalogue should be checked before installation.

CORTECO 01031631B OE Numbers

Confirmed OE references include:

CLAAS 02153081

MAN 06562737012

MERCEDES-BENZ 0159970546

MERCEDES-BENZ A0159970546

RENAULT TRUCKS 5001832206

ZF 0634319004

These OE numbers are valuable product identification entities.

However, an OE number should always be checked together with the specific vehicle, machine, transmission or drive application.

CORTECO 01031631B Mercedes-Benz

CORTECO 01031631B is catalogued for selected Mercedes-Benz applications including:

Mercedes-Benz Viano W639

Mercedes-Benz Vito W639

Mercedes-Benz Vito / Mixto W639

The associated Mercedes-Benz OE references include:

0159970546

A0159970546

Fitment should be confirmed using the OE number, vehicle configuration or VIN-based parts catalogue.

CORTECO 01031631B and 01031631

This product can be identified using several related references:

01031631B

01031631

82031631

BAVISLX7

The full CORTECO reference is:

01031631B

The base reference is:

01031631

The Trade Number is:

82031631

The exact design designation is:

BAVISLX7

Retaining these identifiers supports accurate identification in technical catalogues, purchasing systems and online parts searches.

How to Select CORTECO 01031631B

The principal identification parameters are:

Reference - 01031631B

Dimensions - 55x80x8 mm

Material - FPM

Design - BAVISLX7

Dust lip - Yes

Trade Number - 82031631

EAN - 3358960134950

The OE reference and exact application should also be verified where applicable.

How to Measure a 55x80x8 Oil Seal

Three principal dimensions are used for basic radial shaft seal identification:

Inside diameter d

Outside diameter D

Width B

For CORTECO 01031631B:

d = 55 mm

D = 80 mm

B = 8 mm

A used elastomeric seal may be worn or deformed. Physical measurements should therefore preferably be checked together with the original markings and product reference.

Is Every 55x80x8 Oil Seal Interchangeable?

No.

Several different radial shaft seals can share the same:

55x80x8 mm

dimensions while differing in:

Sealing material

Primary lip construction

Dust lip configuration

Outside diameter construction

Directional sealing geometry

Application

Manufacturer-specific design

For CORTECO 01031631B, the combination 55x80x8 + FPM + BAVISLX7 should be considered during replacement selection.

FPM vs NBR and ACM

The confirmed material for CORTECO 01031631B is:

FPM

Other 55x80x8 mm shaft seals are available in materials such as:

NBR

ACM

These materials should not be considered interchangeable solely because the seal dimensions are identical.

Material selection must correspond to the operating medium, temperature requirements and conditions specified for the particular application.

CORTECO 01031631B Replacement Selection

When comparing CORTECO 01031631B with another shaft seal, verify:

55x80x8 mm dimensions

FPM sealing material

BAVISLX7 design

Additional dust lip

OE reference

Operating medium

Temperature requirements

Shaft speed

Pressure conditions

Catalogue application

Operating limits from another 55x80x8 mm seal should not be transferred to CORTECO 01031631B solely because the dimensions match.

CORTECO 01031631B Technical Data

Manufacturer: CORTECO

Full reference: 01031631B

Base reference: 01031631

Trade Number: 82031631

Product type: Radial shaft oil seal

Design: BAVISLX7

Material: FPM

Inside diameter d: 55 mm

Outside diameter D: 80 mm

Width B: 8 mm

Dimensions: 55x80x8 mm

Dust lip: Yes

EAN: 3358960134950

CLAAS OE: 02153081

MAN OE: 06562737012

MERCEDES-BENZ OE: 0159970546, A0159970546

RENAULT TRUCKS OE: 5001832206

ZF OE: 0634319004

FAQ

What are the dimensions of CORTECO 01031631B?

The exact dimensions are 55x80x8 mm: 55 mm inside diameter, 80 mm outside diameter and 8 mm width.

What material is CORTECO 01031631B made from?

The sealing material is FPM - Fluoroelastomer Rubber.

What is the design of CORTECO 01031631B?

The exact CORTECO design designation is BAVISLX7.

Does CORTECO 01031631B have a dust lip?

Yes. Current product data confirm that the seal incorporates an additional dust lip.

What is the Trade Number for CORTECO 01031631B?

The Trade Number is 82031631.

What is the EAN for CORTECO 01031631B?

The EAN is 3358960134950.

What OE numbers correspond to CORTECO 01031631B?

Confirmed references include CLAAS 02153081, MAN 06562737012, Mercedes-Benz 0159970546 / A0159970546, Renault Trucks 5001832206 and ZF 0634319004.

Can any 55x80x8 oil seal replace CORTECO 01031631B?

Not automatically. The FPM material, BAVISLX7 design, dust lip configuration and requirements of the specific application should also be verified.

AI Overview

CORTECO 01031631B is an FPM radial shaft oil seal measuring 55x80x8 mm. Its exact CORTECO design designation is BAVISLX7, and the seal incorporates an additional dust lip. Base reference: 01031631. Trade Number: 82031631. EAN: 3358960134950. OE references include Mercedes-Benz, MAN, CLAAS, Renault Trucks and ZF.