CORTECO 01033878B ACM BASLRSX7 44x72x8 mm radial shaft oil seal for selected BMW automatic transmissions. Manufactured from ACM polyacrylate rubber, with an additional dust exclusion lip and left-hand oil return structure. OE references: BMW 24137519344, 24130418458; ZF 0734319633. Alternative CORTECO reference: 82033878. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
CORTECO |
|
Manufacturer part number |
01033878B |
|
Alternative CORTECO reference |
82033878 |
|
Construction designation |
BASLRSX7 |
|
Product type |
Radial rotary shaft oil seal |
|
Application |
Automatic transmission shaft sealing |
|
Sealing material |
ACM |
|
Material name |
Polyacrylate Rubber / Acrylic Rubber |
|
Inner diameter (d) |
44 mm |
|
Outer diameter (D) |
72 mm |
|
Axial width (b) |
8 mm |
|
Dimensions |
44x72x8 mm |
|
Additional dust exclusion lip |
Yes |
|
Oil return structure |
Left-hand |
|
Primary function |
Transmission oil retention |
|
Associated manufacturers |
BMW, ZF |
|
EAN |
3358960207197 |
CORTECO is a brand of the Freudenberg Group, specializing in automotive sealing components and related technical products.
Part number 01033878B identifies a specific radial shaft oil seal.
The final letter B is part of the complete manufacturer designation and should be retained during product identification and ordering.
The associated CORTECO commercial reference is 82033878.
The designation specifies three dimensions:
44 mm - nominal shaft diameter.
72 mm - nominal housing bore diameter.
8 mm - nominal axial seal width.
All three dimensions must correspond to the transmission assembly requirements.
Matching dimensions alone does not guarantee interchangeability with seals of different materials, profiles or directional oil return structures.
ACM (Acrylic Rubber) is a synthetic polyacrylate elastomer used in selected automotive sealing applications involving lubricating oils and elevated temperatures.
Its main characteristics include:
Good resistance to many transmission and engine oils.
Good resistance to thermal ageing.
Suitability for elevated operating temperatures, depending on the compound.
Stable sealing properties under appropriate operating conditions.
Elastomeric properties suitable for dynamic rotary shaft sealing.
Compatibility with many lubricants, depending on their formulation.
ACM is not universally resistant to all automatic transmission fluids or chemical substances.
The exact operating temperature range, permissible pressure and maximum rotational speed of CORTECO 01033878B must be confirmed using the manufacturer's technical documentation.
BASLRSX7 identifies the specific construction of the CORTECO oil seal.
The BASL portion is associated with a radial shaft seal featuring an additional dust exclusion lip.
The complete BASLRSX7 designation should be preserved when selecting a replacement.
The manufacturer catalogue data identifies this product as having a left-hand oil return structure.
The remaining characters should not be assigned speculative individual meanings without detailed manufacturer documentation.
The primary sealing lip operates in dynamic contact with a rotating shaft with a nominal diameter of 44 mm.
Its purpose is to restrict transmission oil leakage from the sealed assembly.
Effective sealing depends on the correct seal design, shaft surface quality, alignment, lubrication and installation conditions.
The additional lip helps restrict dust, dirt and other contaminants from reaching the primary sealing area.
This feature is useful in transmission assemblies where a rotating shaft passes through the housing.
The dust exclusion lip provides additional contamination protection but does not automatically establish suitability for high-pressure operation or continuous water exposure.
CORTECO 01033878B features a left-hand oil return structure.
Directional oil return features are designed to support lubricant retention under the intended shaft rotation conditions.
The direction of the oil return structure is an important selection parameter.
A seal with an opposite directional structure should not automatically be considered interchangeable, even when its dimensions and material are identical.
Automatic transmission seals may operate in contact with heated transmission lubricants.
ACM is used in selected sealing applications because of its resistance to many lubricating oils and thermal ageing.
However, the compatibility of ACM with a particular automatic transmission fluid must be confirmed.
The original material specification should not be changed without verifying the transmission manufacturer's requirements.
The following reference numbers are associated with CORTECO 01033878B.
|
Manufacturer |
Reference number |
|---|---|
|
BMW |
24137519344 |
|
BMW |
24130418458 |
|
ZF |
0734319633 |
|
CORTECO |
01033878B |
|
CORTECO |
82033878 |
These references are useful for product identification and replacement selection.
Compatibility with a particular transmission must be confirmed using the relevant OE number and manufacturer documentation.
The product is associated with selected transmission configurations in the following BMW model ranges.
|
BMW model range |
Chassis codes |
|---|---|
|
BMW 1 Series |
E81, E82, E87, E88 |
|
BMW 3 Series |
E90, E91, E92, E93 |
|
BMW 5 Series |
E60, E61 |
CORTECO 01033878B is associated with selected automatic transmission applications in BMW 1 Series vehicles.
Compatibility depends on the specific transmission version, engine configuration and production year.
The seal is also associated with selected automatic transmission configurations in BMW 3 Series vehicles.
The correct part must be verified using the transmission identification and OE reference.
Selected BMW 5 Series transmission applications are included among the supplied vehicle references.
Not every automatic transmission fitted to these models uses the same shaft seal.
Important: The listed BMW chassis codes do not establish compatibility with every engine or transmission configuration.
ZF is a manufacturer of transmission and drivetrain systems, not a vehicle model designation.
CORTECO 01033878B is associated with ZF reference 0734319633.
Before ordering, verify the exact transmission type and the applicable ZF parts catalogue.
The OE reference should take priority over general vehicle model descriptions.
|
Feature |
CORTECO 01033878B ACM |
Typical NBR Oil Seal |
Typical FKM/FPM Oil Seal |
|---|---|---|---|
|
Sealing material |
ACM |
NBR |
FKM/FPM |
|
Dimensions of specified product |
44x72x8 mm |
Product-dependent |
Product-dependent |
|
Resistance to hot lubricating oils |
Good for compatible oils |
Compound-dependent |
Generally good |
|
Thermal ageing resistance |
Good |
Compound-dependent |
Generally very good |
|
Oil return structure |
Left-hand |
Design-dependent |
Design-dependent |
|
Automatic interchangeability |
No |
No |
No |
NBR is widely used in conventional oil sealing applications.
ACM generally offers improved thermal ageing resistance compared with standard NBR compounds, particularly in applications involving hot lubricating oils.
However, material compatibility depends on the exact transmission fluid and operating conditions.
FKM/FPM generally offers broader chemical resistance and often higher temperature capability than ACM.
Nevertheless, a seal manufactured from FKM/FPM is not automatically a suitable replacement for an ACM seal.
Differences in material properties, lip construction and directional oil return features must be considered.
Directional shaft seals are engineered for specific shaft rotation conditions.
The oil return structure can influence lubricant movement at the dynamic sealing interface.
When replacing CORTECO 01033878B, verify:
The original seal's directional structure.
The shaft rotation direction specified for the application.
The complete BASLRSX7 construction designation.
The required sealing material.
The correct OE reference.
A 44x72x8 mm oil seal with a right-hand oil return structure should not automatically replace CORTECO 01033878B with its left-hand structure.
Before ordering, verify:
CORTECO part number - 01033878B.
Nominal dimensions - 44x72x8 mm.
ACM sealing material.
BASLRSX7 construction designation.
Left-hand oil return structure.
Additional dust exclusion lip.
BMW or ZF OE reference.
Exact automatic transmission type.
Compatibility with the specified transmission fluid.
Operating and installation requirements.
Correct identification is particularly important when replacing directional rotary shaft seals.
Correct installation is essential for effective sealing and service life.
Before installation, thoroughly clean the shaft and housing bore.
Inspect the shaft contact surface for scratches, corrosion and excessive wear grooves.
Protect the sealing lips from sharp edges and keyways.
Use a suitable installation tool.
Press the seal evenly into the housing.
Avoid tilting or deforming the seal casing.
Maintain the specified installation depth.
Follow the manufacturer's lubrication instructions.
Verify the correct installation orientation.
Confirm that the directional oil return structure matches the transmission requirements.
In a conventional lubricant-retention arrangement, the primary sealing lip normally faces the transmission oil, while the additional dust lip faces the external environment.
The transmission manufacturer's installation instructions take priority.
The following variants may be used for product identification:
CORTECO 01033878B
CORTECO 01033878B ACM
CORTECO BASLRSX7
CORTECO 01033878B 44x72x8
CORTECO 82033878
CORTECO 44x72x8 Automatic Transmission Oil Seal
BMW Transmission Shaft Seal 44x72x8 ACM
ZF Transmission Oil Seal CORTECO 01033878B
Radial Shaft Oil Seal 44x72x8 ACM BASLRSX7
The oil seal has a nominal inner diameter of 44 mm, outer diameter of 72 mm and axial width of 8 mm.
It is a radial shaft oil seal designed for selected automatic transmission applications, where it helps retain transmission lubricant.
The product is associated with selected BMW E81, E82, E87 and E88 transmission configurations. Compatibility must be verified using the transmission type and OE reference.
It is associated with selected BMW E90, E91, E92, E93, E60 and E61 applications. Not every transmission fitted to these vehicles uses this seal.
Yes. The product features an additional dust exclusion lip.
The manufacturer catalogue identifies a left-hand oil return structure.
Not automatically. Material compatibility, construction, oil return direction and transmission requirements must be verified.
Associated references include BMW 24137519344, BMW 24130418458 and ZF 0734319633.
CORTECO 01033878B ACM BASLRSX7 is a radial automatic transmission shaft oil seal with nominal dimensions of 44x72x8 mm. Manufactured from ACM polyacrylate rubber, it features an additional dust exclusion lip and a left-hand oil return structure. Associated OE references include BMW 24137519344, BMW 24130418458 and ZF 0734319633. Compatibility requires verification against the specific transmission.
Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
Data sheet