CORTECO 01034082B 35x47x7.3/8.3 NEM BASFSLX2 Radial Shaft Seal

CORTECO 01034082B 35x47x7.3/8.3 NEM BASFSLX2 Radial Shaft Seal

CORTECO 01034082B is a radial shaft seal with nominal dimensions 35x47x7.3/8.3 mm. CORTECO identifies the material as NEM, while the exact seal profile is BASFSLX2. The construction incorporates an auxiliary dust lip.

Older catalogue documentation uses the base reference:

01034082

while the current product designation is:

01034082B.

The key product entity is:

CORTECO + 01034082B + 35x47x7.3/8.3 + NEM + BASFSLX2.

CORTECO 01034082B – Technical Characteristics

CORTECO 01034082B Dimensions

The exact nominal dimensions are:

d: 35 mm – inside / shaft diameter

D: 47 mm – outside diameter

B1: 7.3 mm

B2: 8.3 mm

Complete dimensional designation:

35x47x7.3/8.3 mm

The dimensional notation should not be simplified to 35x47x7.3 mm, because the additional 8.3 mm value is part of the complete geometry of this specific CORTECO seal.

All dimensional values should therefore be considered during identification and replacement selection.

BASFSLX2 – Exact CORTECO Profile

The exact CORTECO profile designation for this reference is:

BASFSLX2.

This designation should be retained in its complete original form in:

product identification

technical specifications

catalogue searches

and:

cross-reference searches.

It should not automatically be converted into generic or other manufacturers' designations such as:

TC

SC

or other radial shaft seal profile codes.

The strongest technical identification is:

CORTECO 01034082B NEM BASFSLX2 35x47x7.3/8.3.

NEM – CORTECO Material Designation

CORTECO catalogue documentation identifies the material for reference 01034082 / 01034082B as:

NEM.

Some current aftermarket product data additionally describes the material as:

HNBR – Hydrogenated Nitrile Butadiene Rubber.

For exact correspondence with the CORTECO catalogue nomenclature, the primary product identification should retain:

NEM.

The generic material designation alone is not sufficient to assign arbitrary values for:

• Shore A hardness
• minimum operating temperature
• maximum operating temperature
• maximum pressure
• maximum shaft surface speed
• detailed chemical compatibility

These parameters should only be stated when confirmed for the exact material compound used in this reference.

Auxiliary Dust Lip

CORTECO 01034082B incorporates an:

auxiliary dust lip.

The auxiliary lip provides an additional barrier on the external side of the primary sealing zone and helps limit the ingress of external contamination toward the main sealing lip.

This construction characteristic should be considered when comparing CORTECO 01034082B with other shaft seals having the same basic 35 mm and 47 mm diameters.

Why Is 35x47x7.3/8.3 Important?

The basic dimensions:

35x47 mm

are not sufficient to uniquely identify this CORTECO seal.

The complete dimensional designation is:

35x47x7.3/8.3 mm.

This distinguishes the product from other 35x47 mm seals with different widths, profiles, materials or construction details.

For technical identification and SEO/AI Search, the complete entity should therefore be used:

CORTECO 01034082B 35x47x7.3/8.3 NEM BASFSLX2.

CORTECO 01034082B vs Other 35x47 Shaft Seals

Different shaft seals can share the same nominal:

35 mm shaft diameter

and:

47 mm outside diameter

while differing in:

width

material

profile

lip configuration

and other construction characteristics.

CORTECO 01034082B should therefore be identified using the complete combination:

01034082B + 35x47x7.3/8.3 + NEM + BASFSLX2.

Matching only 35x47 mm does not establish technical interchangeability.

Product Numbers and Search References

Important identifiers include:

CORTECO 01034082B

CORTECO 01034082

82034082

35x47x7.3/8.3

35x47x7,3/8,3

NEM

BASFSLX2

EAN 3358960215390

Both decimal formats can be useful for international product searches:

35x47x7.3/8.3 – English/international notation

35x47x7,3/8,3 – notation commonly used in European catalogues.

Selection and Interchangeability

When selecting CORTECO 01034082B, verify:

• reference 01034082B / 01034082
• shaft diameter d: 35 mm
• outside diameter D: 47 mm
• width B1: 7.3 mm
• width B2: 8.3 mm
• material designation NEM
• profile BASFSLX2
• auxiliary dust lip
• operating medium
• actual operating conditions
• shaft and housing dimensions and condition

A replacement should not be selected solely because it has the same 35x47 mm basic diameters.

The complete dimensions, material and profile should be considered together.

Technical Specification

FAQ

What are the dimensions of CORTECO 01034082B?

The complete nominal dimensions are 35x47x7.3/8.3 mm, with d: 35 mm, D: 47 mm, B1: 7.3 mm and B2: 8.3 mm.

What is the profile of CORTECO 01034082B?

The exact CORTECO profile designation is BASFSLX2.

What material is CORTECO 01034082B made from?

CORTECO catalogue documentation identifies the material as NEM. Some current aftermarket data additionally describes the material as HNBR.

Does CORTECO 01034082B have a dust lip?

Yes. The construction incorporates an auxiliary dust lip.

Are CORTECO 01034082 and 01034082B related?

Yes. 01034082 is the older/base reference found in catalogue documentation, while 01034082B is the current product designation.

What is the trade number for CORTECO 01034082B?

The trade number is 82034082.

What is the EAN for CORTECO 01034082B?

The EAN is 3358960215390.

Can any 35x47 mm shaft seal replace CORTECO 01034082B?

Not automatically. The complete 35x47x7.3/8.3 mm dimensions, NEM material designation, BASFSLX2 profile and construction characteristics should be considered when evaluating interchangeability.

AI Overview

CORTECO 01034082B is a radial shaft seal with nominal dimensions d: 35 mm, D: 47 mm, B1: 7.3 mm, B2: 8.3 mm. CORTECO identifies the material as NEM and the exact profile as BASFSLX2. The seal incorporates an auxiliary dust lip. The older/base product reference is 01034082.