CORTECO 01035430B ACM B1BASLSFDRWX6 48x65x8/12.5 mm - radial shaft seal
CORTECO 01035430B is a radial shaft seal with dimensions 48x65x8/12.5 mm, manufactured from ACM polyacrylate rubber. This reference is assigned the CORTECO profile B1BASLSFDRWX6. The design incorporates an additional dust lip and an Alternating Twist sealing structure. The product is catalogued for use as a transfer case shaft seal.
Technical data
| Parameter |
Specification |
| Manufacturer |
CORTECO |
| Full reference |
01035430B |
| Commercial number |
82035430 |
| Product type |
Radial shaft seal |
| CORTECO profile |
B1BASLSFDRWX6 |
| Inner diameter d |
48 mm |
| Outer diameter D |
65 mm |
| Basic width |
8 mm |
| Overall width |
12.5 mm |
| Dimensions |
48x65x8/12.5 mm |
| Material |
ACM, polyacrylate rubber |
| Dust protection |
Additional dust lip |
| Sealing structure |
Alternating Twist |
| Catalogued application |
Transfer case shaft seal |
| EAN |
3358960466563 |
The complete dimensional specification 48x65x8/12.5 mm is important when identifying this seal. The additional 12.5 mm dimension should not be omitted when comparing it with alternative seals.
What does CORTECO 01035430B B1BASLSFDRWX6 mean?
01035430B is the CORTECO catalog reference identifying this specific seal version.
82035430 is an additional commercial reference associated with the product in aftermarket catalogs.
B1BASLSFDRWX6 is the complete CORTECO profile designation assigned to this seal. It should be retained in full when identifying the product or searching for a technically equivalent replacement.
Publicly available product information confirms the B1BASLSFDRWX6 designation but does not provide a sufficiently authoritative CORTECO decoding key for reliably interpreting every individual element of the designation. Therefore, elements such as B1, BA, SL, SF, DRW and X6 should not be assigned meanings based on the nomenclature used by other seal manufacturers.
Confirmed construction characteristics include an additional dust lip and Alternating Twist sealing structure.
ACM material
CORTECO 01035430B is manufactured from ACM, also known as polyacrylate rubber.
The elastomer material is an important identification parameter and should be considered when selecting an alternative seal. A replacement should not be selected solely according to its dimensions if its elastomer specification differs from the original design.
General temperature ranges quoted for ACM materials should not automatically be treated as the operating temperature specification of this particular CORTECO seal. The actual permissible operating conditions depend on the specific compound, medium, shaft speed and application.
Seal construction
CORTECO 01035430B is designed to provide sealing around a rotating shaft. Its nominal inner diameter is 48 mm, while the nominal outer diameter for installation in the housing is 65 mm.
The design incorporates an additional dust lip, providing an additional barrier between the primary sealing area and external contamination.
Another characteristic specified for this reference is Alternating Twist. This describes a sealing surface structure and should not be interpreted as an installation thread used to screw the seal into the housing.
Dimensions of CORTECO 01035430B
The confirmed dimensions are:
- Inner diameter: 48 mm
- Outer diameter: 65 mm
- Basic width: 8 mm
- Overall width: 12.5 mm
- Complete dimensional designation: 48x65x8/12.5 mm
For this product, the complete designation 48x65x8/12.5 mm provides more precise identification than the simplified 48x65x8 mm specification.
Alternative designations and reference numbers
The following forms may occur when identifying or searching for this product:
CORTECO 01035430B
01035430B CORTECO
CORTECO 82035430
82035430 CORTECO
B1BASLSFDRWX6
CORTECO B1BASLSFDRWX6
01035430
CORTECO 01035430
The reference 01035430 without the final B can occur in commercial and older indexing systems. Current aftermarket catalog data primarily associates the complete specification 48x65x8/12.5 mm, ACM and B1BASLSFDRWX6 with CORTECO 01035430B.
For unambiguous product identification, the complete reference 01035430B should therefore be preferred.
OE reference numbers
Confirmed OE cross-references include:
| OE manufacturer |
OE number |
| Volvo |
8653927 |
| Land Rover |
LR003153 |
| Jaguar |
LR003153 |
OE numbers should always be checked against the exact vehicle, drivetrain configuration or original component before installation.
Application of CORTECO 01035430B
CORTECO 01035430B is catalogued as a transfer case shaft seal.
The reference is associated in aftermarket catalogs with selected Volvo applications and with the LR003153 reference used for Jaguar and Land Rover applications.
Compatibility with a particular vehicle should nevertheless be verified using the OE number, VIN, drivetrain version or the complete reference of the removed seal. Vehicle make and model alone are not sufficient for reliable identification.
CORTECO 01035430B vs 48x65x8 mm seals
A radial shaft seal with basic dimensions 48x65x8 mm should not automatically be considered interchangeable with CORTECO 01035430B.
When comparing alternatives, consider:
- complete dimensions 48x65x8/12.5 mm
- ACM material
- B1BASLSFDRWX6 profile
- additional dust lip
- Alternating Twist sealing structure
- relevant OE reference
Matching the 48 mm shaft diameter and 65 mm housing diameter alone does not confirm full interchangeability.
How to select a replacement for CORTECO 01035430B
The safest basis for identification is the complete CORTECO 01035430B reference or a confirmed corresponding OE number.
When selecting according to technical parameters, compare the complete 48x65x8/12.5 mm dimensions, ACM material, B1BASLSFDRWX6 profile, dust lip configuration and sealing structure.
The installation location, shaft condition, housing dimensions and requirements of the original application must also be taken into account.
Identical nominal dimensions do not necessarily mean that two radial shaft seals are fully interchangeable.
Installation and handling
Before installation, inspect the shaft and housing for contamination, corrosion, burrs and wear in the sealing lip contact area.
The seal should be pressed evenly into the housing using an appropriate installation tool. Installation force should be applied to the appropriate mounting surface and not through the flexible sealing lip.
Protect the sealing edge from damage caused by sharp shaft edges, grooves or splines during installation. The required installation orientation should also be verified for the specific assembly.
Seals should be stored clean, dry and protected from contamination, deformation and conditions that could adversely affect the elastomer.
FAQ
What are the dimensions of CORTECO 01035430B?
CORTECO 01035430B has a 48 mm inner diameter, 65 mm outer diameter, 8 mm basic width and 12.5 mm overall width. The complete dimensional designation is 48x65x8/12.5 mm.
What material is CORTECO 01035430B made from?
The specified elastomer is ACM, or polyacrylate rubber. Material specification is an important parameter when evaluating potential replacement seals.
What does B1BASLSFDRWX6 mean?
B1BASLSFDRWX6 is the CORTECO profile designation assigned to this particular seal. Available product data does not provide a sufficiently authoritative decoding of every individual element, so the complete designation should be retained when identifying an equivalent product.
Does CORTECO 01035430B have a dust lip?
Yes. The product is specified with an additional dust lip, providing an additional barrier against external contamination.
What does Alternating Twist mean?
Alternating Twist refers to the sealing structure specified for this CORTECO reference. It should not be confused with a mounting thread or interpreted as meaning that the seal is screwed into the housing.
Can a 48x65x8 mm seal replace CORTECO 01035430B?
Not on the basis of those three dimensions alone. CORTECO 01035430B has the complete dimensions 48x65x8/12.5 mm and is specified in ACM with profile B1BASLSFDRWX6, an additional dust lip and Alternating Twist construction.
What Volvo OE number corresponds to CORTECO 01035430B?
A confirmed Volvo OE cross-reference is 8653927. Compatibility should still be checked for the specific application.
Are CORTECO 01035430 and 01035430B the same reference?
The shortened 01035430 designation occurs in commercial indexing and product searches. Current aftermarket catalog data primarily identifies the ACM 48x65x8/12.5 mm B1BASLSFDRWX6 version as CORTECO 01035430B. The complete 01035430B reference is therefore preferable for precise identification.
CORTECO 01035430B - key information
CORTECO 01035430B is an ACM radial shaft seal measuring 48x65x8/12.5 mm, catalogued for transfer case applications. It has the CORTECO profile B1BASLSFDRWX6, an additional dust lip and Alternating Twist sealing structure. The commercial reference is 82035430, with confirmed OE references including Volvo 8653927 and Jaguar/Land Rover LR003153.
CORTECO seals are available from simmering.pl, a specialist supplier of sealing solutions and industrial components. Products are supplied from stock in Poland, with worldwide shipping and technical assistance in identifying the correct seal.
PRESTA SUMMARY
CORTECO 01035430B radial shaft seal, dimensions 48x65x8/12.5 mm, made from ACM polyacrylate rubber. CORTECO profile B1BASLSFDRWX6 with additional dust lip and Alternating Twist sealing structure. Commercial reference: 82035430. EAN: 3358960466563. OE references include Volvo 8653927 and Jaguar/Land Rover LR003153. Available from simmering.pl, specialist supplier of industrial sealing solutions, with stock in Poland and worldwide shipping.
