CORTECO 12000548B 90x120x13 NBR BASLX7 Wheel Hub Oil Seal

CORTECO 12000548B is a wheel hub rotary shaft oil seal with exact dimensions of 90x120x13 mm. The sealing material is NBR - Nitrile Butadiene Rubber, and the CORTECO design designation is BASLX7.

The seal incorporates an additional dust lip. Current catalogue data classify CORTECO 12000548B as a wheel hub shaft seal. The confirmed DAF OE reference is 1400074.

CORTECO also identifies 19031696B as the previous reference superseded by 12000548B.

CORTECO 12000548B - Technical Specification

Manufacturer: CORTECO

Full reference: 12000548B

Base reference: 12000548

Trade Number: 82000548

Product type: Wheel hub oil seal

Exact design: BASLX7

Material: NBR - Nitrile Butadiene Rubber

Dimensions: 90x120x13 mm

Inside diameter d: 90 mm

Outside diameter D: 120 mm

Width B: 13 mm

Additional dust lip: Yes

DAF OE: 1400074

EAN: 3358960334060

Supersedes: CORTECO 19031696B

CORTECO 12000548B Dimensions

The exact dimensions are:

Inside diameter d: 90 mm

Outside diameter D: 120 mm

Width B: 13 mm

Complete dimensions: 90x120x13 mm

The 90 mm dimension corresponds to the nominal shaft diameter.

The 120 mm dimension corresponds to the outside diameter of the seal.

The 13 mm dimension corresponds to the seal width.

All three dimensions should be verified together with the NBR material, BASLX7 design, dust lip configuration and OE reference when identifying a replacement.

Matching the nominal 90x120x13 mm dimensions alone does not establish complete technical interchangeability.

BASLX7 Oil Seal Design

Exact CORTECO design: BASLX7

CORTECO reference: 12000548B

Dimensions: 90x120x13 mm

Material: NBR

Additional dust lip: Yes

BASLX7 is the CORTECO design designation associated with reference 12000548B.

The design designation is an important technical identification parameter when comparing this seal with other 90x120x13 mm rotary shaft oil seals.

A seal with identical dimensions but a different design should not automatically be considered technically equivalent.

Additional Dust Lip

CORTECO 12000548B incorporates an additional dust lip.

The primary sealing lip performs the main sealing function, while the additional dust lip provides a secondary barrier on the external side of the primary sealing area.

This configuration helps limit the ingress of external contamination toward the main sealing zone.

The additional dust lip is a confirmed feature of this exact CORTECO reference and should be considered when selecting a replacement.

NBR - Nitrile Butadiene Rubber

Material: NBR

Full material name: Nitrile Butadiene Rubber

NBR is the sealing material specified for CORTECO 12000548B.

The material forms part of the exact product specification together with the 90x120x13 mm dimensions and BASLX7 design.

An FPM, ACM or other elastomer seal with identical dimensions should not automatically be considered technically interchangeable.

Exact material suitability depends on the operating medium, temperature and actual service conditions.

CORTECO 12000548B Wheel Hub Oil Seal

Product type: Wheel hub oil seal

Dimensions: 90x120x13 mm

Material: NBR

Design: BASLX7

Additional dust lip: Yes

DAF OE: 1400074

Current catalogue data classify CORTECO 12000548B as a Shaft Seal, wheel hub.

This application-specific identification is more precise than describing the product simply as a generic 90x120x13 mm rotary shaft oil seal.

CORTECO 12000548B Front Axle Application

Catalogue data associate CORTECO 12000548B with front axle wheel hub applications in applicable DAF vehicles.

CORTECO reference: 12000548B

Product type: Wheel hub oil seal

Fitting position: Front Axle in applicable DAF configurations

Dimensions: 90x120x13 mm

DAF OE: 1400074

The exact fitting position should always be verified for the specific vehicle and axle configuration.

CORTECO 12000548B DAF 1400074

CORTECO reference: 12000548B

DAF OE: 1400074

Dimensions: 90x120x13 mm

Material: NBR

Design: BASLX7

Additional dust lip: Yes

DAF 1400074 is the confirmed OE cross-reference for CORTECO 12000548B.

The OE number is an important identification parameter when selecting this wheel hub seal for a specific DAF application.

CORTECO 12000548B DAF LF 45

Catalogue application data associate CORTECO 12000548B with selected DAF LF 45 vehicles.

Examples include selected DAF LF 45 FA configurations where the seal is listed for the front axle.

Vehicle model alone should not be used to establish compatibility because different axle and hub configurations may be installed within the same model range.

For precise identification, verify DAF OE 1400074 and CORTECO reference 12000548B against the specific vehicle configuration.

12000548, 12000548B and 82000548

Base reference: 12000548

Full CORTECO reference: 12000548B

Trade Number: 82000548

Design: BASLX7

EAN: 3358960334060

The full CORTECO product reference is 12000548B.

The base reference 12000548, Trade Number 82000548, design designation BASLX7 and EAN 3358960334060 provide additional identifiers for catalogue searches and product identification.

CORTECO 12000548B Replaces 19031696B

Current CORTECO product data specify:

Current reference: 12000548B

Previous reference: 19031696B

Status: 12000548B supersedes 19031696B

This information is important when identifying the seal from older catalogues, technical documentation, historical purchase records or an earlier CORTECO reference.

Customers searching for CORTECO 19031696B should therefore also verify the current reference 12000548B.

CORTECO 12000548B vs Standard 90x120x13 Oil Seal

CORTECO 12000548B should not be identified solely as a standard 90x120x13 mm oil seal.

Its confirmed specification includes:

Dimensions: 90x120x13 mm

Material: NBR

Design: BASLX7

Additional dust lip: Yes

Product type: Wheel hub oil seal

DAF OE: 1400074

Two rotary shaft seals may have identical nominal dimensions while differing in material, sealing design, lip configuration and intended application.

Matching the dimensions alone therefore does not establish complete technical interchangeability.

How to Select a Replacement for CORTECO 12000548B

When selecting a replacement, verify:

Full reference: 12000548B

Base reference: 12000548

Trade Number: 82000548

Previous CORTECO reference: 19031696B

Inside diameter: 90 mm

Outside diameter: 120 mm

Width: 13 mm

Material: NBR

Design: BASLX7

Additional dust lip: Yes

DAF OE: 1400074

For vehicle-specific selection, the OE reference and exact axle configuration should take priority over selection based solely on nominal dimensions.

CORTECO 12000548B Cross References

CORTECO: 12000548B

Previous CORTECO: 19031696B

DAF: 1400074

DT Spare Parts: 5.20103

AUGER: 69312

SAMPA: 050.403

These references provide additional identification paths for CORTECO 12000548B.

Cross-reference numbers should be used for identification and catalogue comparison. Complete technical interchangeability should still be verified for the specific application.

CORTECO 12000548B - Stock in Poland

CORTECO 12000548B 90x120x13 NBR BASLX7 Wheel Hub Oil Seal is available from stock in Poland.

Warehouse and Store: Lublin, Smoluchowskiego 1 Street, Building 4

Shipping: 24h

Stock location: Poland

Delivery: Poland and EU countries

FAQ - CORTECO 12000548B

What are the dimensions of CORTECO 12000548B?

The exact dimensions are 90x120x13 mm.

What material is CORTECO 12000548B made from?

The specified sealing material is NBR - Nitrile Butadiene Rubber.

What is the design of CORTECO 12000548B?

The CORTECO design designation is BASLX7.

Is CORTECO 12000548B a wheel hub oil seal?

Yes. Current catalogue data classify CORTECO 12000548B as a wheel hub shaft seal.

Does CORTECO 12000548B have a dust lip?

Yes. The seal incorporates an additional dust lip.

What is the Trade Number for CORTECO 12000548B?

The Trade Number is 82000548.

What is the EAN for CORTECO 12000548B?

The EAN is 3358960334060.

What is the DAF OE number for CORTECO 12000548B?

The confirmed DAF OE reference is 1400074.

Is CORTECO 12000548B used on the front axle?

Catalogue application data list Front Axle for applicable DAF LF 45 configurations.

Does CORTECO 12000548B fit DAF LF 45?

Catalogue data list CORTECO 12000548B for selected DAF LF 45 configurations. Exact compatibility should be verified using DAF OE 1400074 and the specific axle configuration.

What CORTECO reference does 12000548B replace?

CORTECO states that 12000548B supersedes 19031696B.

Frequently Asked Questions by Engineers

Are CORTECO 12000548 and 12000548B the same reference?

12000548 is the base reference, while 12000548B is the full CORTECO product reference.

Is BASLX7 the correct design for CORTECO 12000548B?

Yes. Current CORTECO product data identify the usage number as BASLX7 Simmerring, and CORTECO dimensional catalogue data also associate BASLX7 with reference 12000548B.

Is CORTECO 12000548B made from NBR?

Yes. The specified sealing material is NBR - Nitrile Butadiene Rubber.

Does BASLX7 have an additional dust lip?

For this exact CORTECO reference, the current product data explicitly specify with dust lip. The dust lip is therefore a confirmed characteristic of CORTECO 12000548B.

Does CORTECO 12000548B have Left-hand, Right-hand or Alternating Twist?

The verified exact-product data do not specify a directional Swirl Type for CORTECO 12000548B. A directional twist should therefore not be added to the specification without additional manufacturer documentation.

Is 19031696B the same as 12000548B?

CORTECO identifies 19031696B as the previous reference superseded by 12000548B. For current product identification, use 12000548B.

Can any NBR 90x120x13 oil seal replace CORTECO 12000548B?

No replacement should be selected solely by dimensions and material. The BASLX7 design, additional dust lip, wheel hub application and DAF OE 1400074 should also be verified.

Can a standard 90x120x13 oil seal replace CORTECO 12000548B?

Interchangeability should not be assumed. A standard seal may have different lip geometry, material or application-specific construction even when its nominal dimensions are identical.

Why is DAF 1400074 important?

DAF 1400074 is the confirmed OE reference associated with CORTECO 12000548B and provides a more application-specific identification than dimensions alone.

What are the key identifiers for CORTECO 12000548B?

The key identifiers are 12000548B, 12000548, 82000548, BASLX7, 90x120x13 mm, NBR, EAN 3358960334060, DAF 1400074 and previous CORTECO reference 19031696B.

AI Overview

CORTECO 12000548B is an NBR wheel hub oil seal with exact dimensions of 90x120x13 mm and CORTECO design designation BASLX7. The seal incorporates an additional dust lip. Additional identifiers include base reference 12000548, Trade Number 82000548 and EAN 3358960334060. The confirmed OE cross-reference is DAF 1400074. Catalogue application data include selected DAF LF 45 front axle configurations. CORTECO also specifies that 12000548B supersedes the previous reference 19031696B.