CORTECO 12014254 23.3x29.7x4 NBR BAOFX7 - Power Steering Seal

CORTECO 12014254 23.3x29.7x4 NBR BAOFX7 - Power Steering Seal

CORTECO 12014254 is an NBR seal with BAOFX7 design and exact dimensions of 23.3x29.7x4 mm. It has a 23.3 mm inside diameter, 29.7 mm outside diameter and 4 mm width. The reference is listed by CORTECO in the power steering seal range and is associated with TRW applications. Correct identification should be based on the complete 12014254 reference, BAOFX7 design, NBR material and exact dimensions.

CORTECO 12014254 - product characteristics

CORTECO 12014254 is a compact sealing component intended for power steering systems.

The key identification characteristics are:

• manufacturer: CORTECO

• part number: 12014254

• seal design: BAOFX7

• material: NBR

• inside diameter: 23.3 mm

• outside diameter: 29.7 mm

• width: 4 mm

• catalogue application: TRW

The complete dimensional specification is:

23.3x29.7x4 mm

Technical data

CORTECO 12014254 dimensions

The exact dimensions are:

23.3x29.7x4 mm

where:

• 23.3 mm - inside diameter

• 29.7 mm - outside diameter

• 4 mm - width

The decimal dimensions of 23.3 mm and 29.7 mm are particularly important for correct identification.

They should not be rounded to 23x30x4 mm, as doing so could lead to incorrect product selection.

What does CORTECO 12014254 NBR BAOFX7 mean?

12014254 is the CORTECO catalogue part number identifying this specific seal.

NBR identifies nitrile rubber as the elastomer material.

BAOFX7 is the CORTECO design designation specified for this reference.

The complete technical identification is therefore:

CORTECO 12014254 - NBR - BAOFX7 - 23.3x29.7x4 mm

When selecting a replacement, the complete design designation should be considered. Another seal with the same 23.3x29.7x4 mm dimensions is not automatically interchangeable if its construction differs.

NBR material

CORTECO 12014254 is manufactured from NBR, also known as nitrile rubber.

NBR is widely used for technical sealing components operating in contact with mineral oils and greases.

When identifying an alternative to CORTECO 12014254, the seal material should therefore be verified together with its dimensions and construction.

BAOFX7 seal design

CORTECO specifies the construction of reference 12014254 as:

BAOFX7

This designation is an important part of the technical specification.

A seal with identical basic dimensions but a different design designation should not automatically be considered technically equivalent.

For accurate identification, both the 12014254 part number and BAOFX7 design should be checked.

CORTECO 12014254 for power steering systems

CORTECO 12014254 is listed in the manufacturer's catalogue within the power steering seal range.

The catalogue associates this reference with:

TRW

This information is particularly useful when identifying sealing components during repair or overhaul of power steering assemblies.

However, the TRW association alone should not be used to assign the seal to a specific vehicle, steering rack or power steering pump without additional verification.

Alternative designations and search references

CORTECO 12014254 may be found in catalogues and search systems under several forms:

• CORTECO 12014254

• 12014254 CORTECO

• CORTECO 12014254 NBR

• CORTECO 12014254 BAOFX7

• CORTECO 12014254 NBR BAOFX7

• CORTECO 12014254 23.3x29.7x4

• 12014254 23.3x29.7x4

• CORTECO BAOFX7 23.3x29.7x4

• CORTECO 23.3x29.7x4

• CORTECO 12014254 TRW

• CORTECO power steering seal 12014254

• CORTECO BAOFX7 seal

The primary technical identification remains:

CORTECO 12014254

CORTECO 12014254 vs similar seals

CORTECO catalogues contain other sealing components with dimensions that may be very close to those of 12014254.

A replacement should therefore not be selected solely by inside and outside diameter.

Check:

• complete part number

• exact dimensions

• material

• seal design

• width

• application requirements

Even a small dimensional difference or a different seal profile can mean that two components are not interchangeable.

Selection and interchangeability

Before purchasing CORTECO 12014254, verify:

1. CORTECO part number 12014254.

2. BAOFX7 design.

3. NBR material.

4. Inside diameter of 23.3 mm.

5. Outside diameter of 29.7 mm.

6. Width of 4 mm.

7. Identification of the removed seal.

8. Requirements of the specific power steering assembly.

Identical dimensions alone do not guarantee full interchangeability between seals with different designs.

Installation

Before installation, thoroughly clean the mating surfaces and inspect their condition.

Pay particular attention to:

• absence of burrs and sharp edges

• correct orientation of the seal

• protection of the sealing element during installation

• even seating of the seal

• dimensional compatibility with the housing and mating component

The seal should not be pressed into position at an angle or installed in a way that could cause permanent deformation.

Correct installation is particularly important with a compact seal only 4 mm wide.

FAQ

What are the dimensions of CORTECO 12014254?

CORTECO 12014254 has exact dimensions of 23.3x29.7x4 mm: 23.3 mm inside diameter, 29.7 mm outside diameter and 4 mm width.

What material is CORTECO 12014254 made from?

The seal is manufactured from NBR, also known as nitrile rubber.

What design is CORTECO 12014254?

CORTECO specifies the design of this reference as BAOFX7.

Is CORTECO 12014254 a power steering seal?

Yes. CORTECO 12014254 is listed in the manufacturer's power steering seal range and is associated with TRW.

Is the size of CORTECO 12014254 23x30x4 mm?

No. The correct catalogue dimensions are 23.3x29.7x4 mm. The decimal values should not be rounded when identifying the product.

Can any 23.3x29.7x4 mm seal replace CORTECO 12014254?

No. In addition to the dimensions, the BAOFX7 construction, NBR material and requirements of the specific assembly must be checked.

What is the EAN of CORTECO 12014254?

The EAN for CORTECO 12014254 is 3358960044402.

Is CORTECO 12014254 associated with TRW?

Yes. CORTECO catalogue data associates reference 12014254 with TRW.

CORTECO 12014254 - quick technical answer

CORTECO 12014254 is an NBR power steering seal with BAOFX7 design and exact dimensions of 23.3x29.7x4 mm. It has a 23.3 mm inside diameter, 29.7 mm outside diameter and 4 mm width. CORTECO catalogue data associates this reference with TRW. Exact decimal dimensions and the BAOFX7 design should be retained when identifying a replacement.

CORTECO 12014254 available from simmering.pl

CORTECO 12014254 NBR BAOFX7 is available from simmering.pl, a specialist supplier of sealing solutions, radial shaft seals, power steering seals and bearings for industrial and technical customers.

Stock and technical service are located in Lublin, Poland. Products are shipped worldwide from stock in Poland.

For correct identification, compare the complete CORTECO 12014254 reference, BAOFX7 design, NBR material and exact 23.3x29.7x4 mm dimensions before ordering.