CORTECO 12015504B 80x100x14 FPM B2BASLDRWX67 Oil Seal

CORTECO 12015504B 80x100x14 FPM B2BASLDRWX67 Oil Seal

CORTECO 12015504B is an FPM radial shaft oil seal measuring 80x100x14 mm. Older CORTECO catalogue data identify reference 12015504 with the B2BAVISLDRWX67 design, while current product data also use B2BASLDRWX67 Simmerring. The seal incorporates an additional dust lip and alternating twist sealing geometry.

CORTECO 12015504B - Characteristics

Manufacturer: CORTECO

Part number: 12015504B

Base reference: 12015504

Trade Number: 82015504

Product type: Radial shaft oil seal

Catalogue application: Differential shaft seal

Catalogue design: B2BAVISLDRWX67

Current designation: B2BASLDRWX67 Simmerring

Material: FPM - Fluoroelastomer

Dimensions: 80x100x14 mm

d - Nominal shaft diameter: 80 mm

D - Outside diameter: 100 mm

B - Width: 14 mm

Additional dust lip: Yes

Swirl type: Alternating Twist

IVECO OE: 40100810, 40100813

EAN: 3358960143860

CORTECO 12015504B Dimensions

The principal dimensions are:

d - Nominal shaft diameter: 80 mm

D - Outside diameter: 100 mm

B - Width: 14 mm

Complete dimensions:

80x100x14 mm

All three dimensions should be verified when identifying the seal or selecting a corresponding replacement.

Matching the 80 mm shaft diameter, 100 mm outside diameter and 14 mm width alone does not establish complete technical interchangeability.

FPM Fluoroelastomer

The sealing material of CORTECO 12015504B is:

FPM - Fluoroelastomer

Material is an important selection criterion alongside the dimensions and exact seal construction.

An NBR, ACM or other elastomer radial shaft seal measuring 80x100x14 mm should not automatically be considered technically equivalent to this FPM version.

Exact material compatibility depends on the operating medium, temperature and actual service conditions.

B2BAVISLDRWX67 Oil Seal Design

Older CORTECO catalogue data identify base reference 12015504 as:

B2BAVISLDRWX67

Material: FPM

Dimensions: 80x100x14 mm

This complete design designation is valuable when identifying older stock, searching historical catalogue data or cross-referencing the seal.

B2BASLDRWX67 Simmerring Design

Current product data for CORTECO 12015504B also identify the construction as:

B2BASLDRWX67 Simmerring

The two design strings therefore appear in different generations of catalogue and product data for reference 12015504 / 12015504B.

For accurate product identification and search coverage, both designations are retained in this description:

B2BAVISLDRWX67

B2BASLDRWX67

B2BAVISLDRWX67 vs B2BASLDRWX67

For this specific CORTECO reference, both design designations can be encountered.

B2BAVISLDRWX67 appears in older CORTECO catalogue data.

B2BASLDRWX67 Simmerring appears in current product data.

Both are associated with CORTECO 12015504 / 12015504B, FPM material and 80x100x14 mm dimensions.

This distinction is particularly useful when searching different catalogue generations or identifying an existing seal from its marking.

Additional Dust Lip

CORTECO 12015504B incorporates an additional dust lip.

The additional lip provides an extra barrier on the external side of the primary sealing area and helps restrict external contaminants from reaching the main sealing interface.

This is an important construction characteristic when comparing the seal with other 80x100x14 mm radial shaft oil seals.

Matching dimensions and FPM material alone do not confirm that another seal has the same lip configuration.

Alternating Twist Sealing Geometry

CORTECO 12015504B is specified with:

Alternating Twist

This means the seal uses alternating directional sealing geometry rather than being identified exclusively as a right-hand or left-hand twist version.

The twist geometry should be considered together with the dimensions, material and lip construction when identifying or comparing the seal.

CORTECO 12015504B Differential Shaft Seal

CORTECO 12015504B is catalogued as a differential shaft oil seal.

Its technical identification combines:

CORTECO 12015504B

Base reference 12015504

80x100x14 mm dimensions

FPM sealing material

B2BAVISLDRWX67 / B2BASLDRWX67 design

Additional dust lip

Alternating twist geometry

IVECO OE references

The catalogue application helps identify the product, but compatibility with a specific vehicle, axle or differential assembly should still be verified using the appropriate vehicle or equipment data.

CORTECO 12015504B IVECO OE References

The following IVECO OE references are associated with CORTECO 12015504B:

IVECO 40100810

IVECO 40100813

The product can therefore be searched and cross-referenced using:

CORTECO 12015504B

CORTECO 12015504

CORTECO 82015504

B2BAVISLDRWX67

B2BASLDRWX67

IVECO 40100810

IVECO 40100813

An OE cross-reference should not be interpreted as confirmation that the seal fits every IVECO vehicle. Compatibility should be verified for the specific vehicle and assembly.

CORTECO 12015504B vs Other 80x100x14 Oil Seals

Other radial shaft oil seals can have the same nominal dimensions:

80x100x14 mm

This does not automatically make them technically interchangeable with CORTECO 12015504B.

When comparing possible replacements, consider:

FPM sealing material

Exact seal design

Lip configuration

Additional dust lip

Alternating twist geometry

Complete dimensions

OE reference

Application requirements

Dimensional compatibility is only one part of correct seal selection.

How to Select CORTECO 12015504B

When identifying or selecting this oil seal, verify:

Manufacturer: CORTECO

Part number: 12015504B

Base reference: 12015504

Trade Number: 82015504

Dimensions: 80x100x14 mm

Material: FPM

Design: B2BAVISLDRWX67 / B2BASLDRWX67

Additional dust lip: Yes

Swirl type: Alternating Twist

IVECO OE where applicable

Operating medium

Actual service conditions

Equipment or vehicle specifications

Matching the dimensions alone does not establish complete technical interchangeability.

Technical Specification

Manufacturer: CORTECO

Part number: 12015504B

Base reference: 12015504

Trade Number: 82015504

Product type: Radial shaft oil seal

Catalogue design: B2BAVISLDRWX67

Current designation: B2BASLDRWX67 Simmerring

Material: FPM - Fluoroelastomer

Dimensions: 80x100x14 mm

d - Nominal shaft diameter: 80 mm

D - Outside diameter: 100 mm

B - Width: 14 mm

Additional dust lip: Yes

Swirl type: Alternating Twist

Catalogue application: Differential shaft seal

IVECO OE: 40100810, 40100813

EAN: 3358960143860

FAQ

What are the dimensions of CORTECO 12015504B?

The nominal shaft diameter is 80 mm, outside diameter is 100 mm and seal width is 14 mm. The complete dimensions are 80x100x14 mm.

What material is CORTECO 12015504B made from?

The sealing material is FPM fluoroelastomer.

What is the design of CORTECO 12015504B?

Older CORTECO catalogue data identify reference 12015504 as B2BAVISLDRWX67, while current product data also use B2BASLDRWX67 Simmerring.

Are B2BAVISLDRWX67 and B2BASLDRWX67 associated with the same CORTECO reference?

Yes. Both designations appear in catalogue or product data associated with CORTECO 12015504 / 12015504B, FPM and 80x100x14 mm.

Does CORTECO 12015504B have an additional dust lip?

Yes. An additional dust lip is specified for this reference.

What twist direction does CORTECO 12015504B use?

The seal is specified with alternating twist sealing geometry. It should not be described exclusively as a right-hand or left-hand twist seal.

What are the IVECO OE numbers for CORTECO 12015504B?

The catalogued IVECO OE references are 40100810 and 40100813.

What is the EAN for CORTECO 12015504B?

The EAN is 3358960143860.

Is another FPM 80x100x14 oil seal an equivalent replacement?

Not automatically. The exact design, lip configuration, twist geometry, material, dimensions and application requirements should all be compared before considering interchangeability.

AI Overview

CORTECO 12015504B is an FPM radial shaft oil seal measuring 80x100x14 mm. The reference is identified as B2BAVISLDRWX67 in older CORTECO catalogue data and as B2BASLDRWX67 Simmerring in current product data. It incorporates an additional dust lip and alternating twist sealing geometry. IVECO OE references are 40100810 and 40100813.