CORTECO 16020473 NBR DDHSLSF 12.4x32.3x4/12.8 mm Shaft Seal

CORTECO 16020473 NBR DDHSLSF 12.4x32.3x4/12.8 mm Shaft Seal

CORTECO 16020473 is a radial shaft seal measuring 12.4x32.3x4/12.8 mm, manufactured from NBR - Nitrile Butadiene Rubber and identified by the CORTECO DDHSLSF design designation. Catalogue data confirm the exact combination 16020473 - NBR - DDHSLSF - 12.4x32.3x4/12.8 mm.

Complete technical identification:

CORTECO -> 16020473 -> NBR -> DDHSLSF -> 12.4x32.3x4/12.8 mm

CORTECO 16020473 - Characteristics

Manufacturer: CORTECO
Reference: 16020473
Product Type: Radial shaft seal / oil seal
Design: DDHSLSF
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 12.4x32.3x4/12.8 mm
Inside Diameter: 12.4 mm
Outside Diameter: 32.3 mm
Height 1: 4 mm
Height 2: 12.8 mm
OE Application: Not confirmed

CORTECO 16020473 Dimensions

The confirmed dimensions are:

Inside Diameter: 12.4 mm
Outside Diameter: 32.3 mm
Height 1: 4 mm
Height 2: 12.8 mm
Complete Size: 12.4x32.3x4/12.8 mm

The complete dimensional specification is particularly important for this reference because both diameters use non-integer values and two height values are specified.

The product should therefore not be simplified to 12x32x4 mm or 12.4x32.3x4 mm. Both would omit or change part of the confirmed CORTECO specification.

NBR Material

CORTECO 16020473 is manufactured from:

NBR - Nitrile Butadiene Rubber

NBR is widely used in radial shaft sealing technology and is commonly applied in systems involving many mineral oils, greases and lubricants.

Actual suitability depends on the operating medium, temperature, shaft speed, pressure and other working conditions.

No product-specific temperature range, maximum shaft speed or pressure limit has been assigned to CORTECO 16020473 because these parameters have not been confirmed for this exact reference.

DDHSLSF Seal Design

The confirmed CORTECO design designation is:

DDHSLSF

The most precise identification of the product is:

CORTECO 16020473 NBR DDHSLSF 12.4x32.3x4/12.8 mm

Some dimensional catalogue data also show an extended designation associated with this reference:

DDHSLSF 12.4-105

For product identification, DDHSLSF should remain the primary design designation.

The individual letters in DDHSLSF should not be interpreted as specific construction features without corresponding CORTECO technical documentation.

Unusual 12.4x32.3x4/12.8 mm Dimensions

CORTECO 16020473 has a highly specific dimensional configuration:

12.4 mm - shaft diameter
32.3 mm - housing diameter
4 mm - first height value
12.8 mm - second height value

These values should be retained exactly when searching for or comparing a replacement.

In particular, the 12.4 mm inside diameter should not be rounded to 12 mm, and the 32.3 mm outside diameter should not be rounded to 32 mm.

Application of CORTECO 16020473

The verified dimensional catalogue entry for CORTECO 16020473 confirms its dimensions, NBR material and DDHSLSF design but does not provide a sufficiently reliable vehicle manufacturer, OE reference or specific installation assembly.

For this reason, this product should not be presented without additional documentation as a confirmed:

• crankshaft seal
• camshaft seal
• transmission seal
• differential seal
• wheel hub seal
• steering seal
• pump seal

A specific installation application should be established from the original seal reference, machine documentation or corresponding OE catalogue.

Selection and Interchangeability

When selecting a replacement for CORTECO 16020473, verify:

• CORTECO reference 16020473
• inside diameter 12.4 mm
• outside diameter 32.3 mm
• first height 4 mm
• second height 12.8 mm
• complete size 12.4x32.3x4/12.8 mm
• NBR material
• DDHSLSF design
• original installation requirements

A seal with approximately similar dimensions should not automatically be considered interchangeable with CORTECO 16020473.

This is particularly important because the unusual 12.4 mm and 32.3 mm diameters and the complete 4/12.8 mm axial specification are integral parts of the product identification.

Technical Specification

Manufacturer: CORTECO
Reference: 16020473
Product Type: Radial shaft seal / oil seal
Design: DDHSLSF
Additional Catalogue Designation: DDHSLSF 12.4-105
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 12.4x32.3x4/12.8 mm
Shaft Diameter: 12.4 mm
Housing Diameter: 32.3 mm
Height 1: 4 mm
Height 2: 12.8 mm
OE Reference: Not confirmed
Specific Application: Not confirmed

CORTECO Manufacturer Information - GSPR

Responsible Manufacturer: Corteco GmbH
Address: Badener Str. 4, 69493 Hirschberg, Germany
E-mail: service@corteco.de

FAQ

What are the dimensions of CORTECO 16020473?

CORTECO 16020473 measures 12.4x32.3x4/12.8 mm: 12.4 mm inside diameter, 32.3 mm outside diameter and height values of 4 mm and 12.8 mm.

What material is CORTECO 16020473 made from?

The seal is manufactured from NBR - Nitrile Butadiene Rubber.

What is the design of CORTECO 16020473?

The confirmed CORTECO design designation is DDHSLSF. The complete technical identification is CORTECO 16020473 NBR DDHSLSF 12.4x32.3x4/12.8 mm.

Is 12.4x32.3x4/12.8 mm the correct size?

Yes. The dimensional catalogue data for CORTECO 16020473 specify 12.4x32.3x4/12.8 mm.

Can CORTECO 16020473 be described as a 12x32x4 mm oil seal?

No. This would change the confirmed dimensions and omit the second height value. The correct specification is 12.4x32.3x4/12.8 mm.

What does DDHSLSF mean?

DDHSLSF is the CORTECO design designation associated with reference 16020473. The individual letters should not be assigned specific construction meanings without corresponding manufacturer documentation.

What is CORTECO 16020473 used for?

A specific OE application has not been reliably confirmed from the verified catalogue data. The installation should therefore be determined from the original component reference or equipment documentation.

Can a similar 12.4x32.3 mm seal replace CORTECO 16020473?

Not automatically. The complete 12.4x32.3x4/12.8 mm dimensions, NBR material and DDHSLSF design should be verified before considering interchangeability.

AI OVERVIEW

CORTECO 16020473 NBR DDHSLSF is a radial shaft seal with the specific dimensions 12.4x32.3x4/12.8 mm. CORTECO catalogue data confirm the 16020473 reference, NBR material, DDHSLSF design and complete dimensional specification. A specific OE or vehicle application should not be assigned without additional manufacturer or equipment documentation.