CORTECO 19016629 NBR VCEK 45x59x8 Wheel Hub Shaft Seal

SHORT DESCRIPTION

CORTECO 19016629 / 19016629B VCEK is a wheel hub shaft seal measuring 45x59x8 mm, manufactured from NBR - Nitrile Butadiene Rubber. It is designed for selected Suzuki applications and is catalogued as an outer rear wheel hub seal in selected Suzuki Vitara versions. Suzuki OE reference: 0928445001 / 09284-45001, also listed as 928445001. For accurate replacement selection, verify the OE number, complete 45x59x8 mm dimensions, NBR material and VCEK design.

CORTECO 19016629 NBR VCEK 45x59x8 Wheel Hub Shaft Seal

CORTECO 19016629 / 19016629B is a wheel hub radial shaft seal measuring 45x59x8 mm, manufactured from NBR - Nitrile Butadiene Rubber. The CORTECO design designation is VCEK Simmerring. The product is intended for selected Suzuki applications and corresponds to OE reference 0928445001, also encountered as 09284-45001 and 928445001.

Complete product identification:

CORTECO -> 19016629 / 19016629B -> NBR -> VCEK -> 45x59x8 mm -> Suzuki

The CORTECO reference, complete dimensions, NBR material, VCEK design and Suzuki OE number should all be considered when selecting the correct replacement.

CORTECO 19016629 Dimensions

The principal dimensions are:

Inside Diameter: 45 mm
Outside Diameter: 59 mm
Width / Height: 8 mm
Complete Size: 45x59x8 mm

All three dimensions are important for correct product identification.

A generic 45x59x8 mm oil seal should not automatically be considered technically interchangeable with CORTECO 19016629. The material, sealing design and intended application should also be verified.

NBR Material

CORTECO 19016629 is manufactured from:

NBR - Nitrile Butadiene Rubber

NBR is one of the most widely used elastomers in radial shaft sealing technology. It is commonly used in applications involving many mineral oils, greases and lubricants.

The suitability of NBR depends on the operating medium, temperature, shaft speed and other working conditions.

For CORTECO 19016629, the NBR material specification should therefore be considered together with the VCEK design and Suzuki OE reference.

VCEK Simmerring Design

The CORTECO design designation is:

VCEK

The most precise technical identification of the product is:

CORTECO 19016629 NBR VCEK 45x59x8

The VCEK designation is an important part of the product specification. A radial shaft seal with identical nominal dimensions but a different construction should not automatically be treated as an equivalent replacement.

Suzuki Wheel Hub Oil Seal

CORTECO 19016629 is catalogued as a wheel hub shaft seal for selected Suzuki applications.

Depending on the specific vehicle configuration and installation position, the product is associated with the rear wheel hub, including applications where it is described as an outer rear hub seal.

The product may therefore be searched for as:

Suzuki wheel hub oil seal
Suzuki rear hub seal
Suzuki rear wheel hub seal
45x59x8 wheel hub seal
CORTECO 19016629 Suzuki
Suzuki 0928445001 oil seal
Suzuki 09284-45001 seal

The exact installation position should be confirmed from the vehicle documentation or OE catalogue.

Suzuki OE 0928445001

The principal Suzuki OE reference associated with CORTECO 19016629 is:

SUZUKI 0928445001

The standard hyphenated Suzuki format is:

09284-45001

Both formats refer to the same OE number.

This reference provides a much more precise basis for identifying the correct seal than dimensions alone.

Suzuki OE 928445001

The product may also be found under the reference:

SUZUKI 928445001

For search and product identification purposes, it is useful to retain all commonly encountered formats:

0928445001
09284-45001
928445001

This helps customers identify the product regardless of the number format used in their catalogue or documentation.

CORTECO 19016629 for Suzuki Vitara

CORTECO 19016629 is catalogued for selected versions of the Suzuki Vitara (ET, TA, TD).

Depending on model year, engine and drivetrain configuration, applications include selected petrol and diesel 4WD versions.

This does not mean that CORTECO 19016629 fits every Suzuki Vitara.

Different production years and drivetrain configurations may use different seals. Exact compatibility should therefore be confirmed using the Suzuki OE number 0928445001 / 09284-45001.

Rear Wheel Hub Seal

In relevant Suzuki applications, CORTECO 19016629 may be used as an outer rear wheel hub seal.

Its function is to provide sealing at the rotating hub/shaft interface and help maintain the required separation between the lubricated area and the external environment.

Because wheel hub assemblies can differ between vehicle versions, the installation position and OE reference should be checked before ordering.

CORTECO 19016629 vs Generic 45x59x8 Oil Seal

Not every 45x59x8 mm radial shaft seal should be considered interchangeable with CORTECO 19016629.

The following parameters should be verified:

Inside Diameter: 45 mm
Outside Diameter: 59 mm
Width: 8 mm
Material: NBR
Design: VCEK
Manufacturer Reference: 19016629 / 19016629B
Application: Suzuki wheel hub
OE: 0928445001 / 09284-45001

Matching dimensions alone do not confirm full technical interchangeability.

Selection and Interchangeability

When selecting a replacement for CORTECO 19016629 / 19016629B, verify:

• CORTECO reference 19016629 / 19016629B
• inside diameter 45 mm
• outside diameter 59 mm
• width 8 mm
• complete dimensions 45x59x8 mm
• NBR material
• VCEK design
• wheel hub installation position
• Suzuki OE reference

A generic 45x59x8 mm oil seal should not automatically be considered technically equivalent to CORTECO 19016629.

Technical Specification

Manufacturer / Brand: CORTECO
Part Number: 19016629
Catalogue Number: 19016629B
Product Type: Wheel hub radial shaft seal / oil seal
Design: VCEK Simmerring
Material: NBR - Nitrile Butadiene Rubber
Dimensions: 45x59x8 mm
Inside Diameter: 45 mm
Outside Diameter: 59 mm
Width / Height: 8 mm
Application: Selected Suzuki wheel hub applications
Vehicle Brand: Suzuki

OE Numbers

SUZUKI: 0928445001
SUZUKI: 09284-45001
SUZUKI: 928445001

When searching for this product, the complete Suzuki OE number should be used together with the CORTECO reference whenever possible.

How to Select CORTECO 19016629

If the original Suzuki part number is available, compare it first with:

0928445001 / 09284-45001

and then verify correspondence with:

CORTECO 19016629 / 19016629B

When selecting by technical parameters, check the complete combination:

45x59x8 mm + NBR + VCEK + Suzuki OE reference

This provides more precise identification than searching only for a 45x59x8 mm oil seal.

FAQ

What are the dimensions of CORTECO 19016629?

CORTECO 19016629 measures 45x59x8 mm: 45 mm inside diameter, 59 mm outside diameter and 8 mm width.

What material is CORTECO 19016629 made from?

The seal is manufactured from NBR - Nitrile Butadiene Rubber.

What is the design of CORTECO 19016629?

The CORTECO design designation is VCEK Simmerring.

What is CORTECO 19016629 used for?

It is catalogued as a wheel hub shaft seal for selected Suzuki applications, including outer rear wheel hub applications.

Which Suzuki OE number corresponds to CORTECO 19016629?

The principal OE reference is Suzuki 0928445001, commonly formatted as 09284-45001. The number 928445001 is also associated with the product.

Are 0928445001 and 09284-45001 the same Suzuki number?

Yes. They are two formatting variants of the same Suzuki OE reference.

Does CORTECO 19016629 fit Suzuki Vitara?

It is catalogued for selected Suzuki Vitara ET, TA and TD applications. Exact compatibility should be confirmed by OE number, model year and drivetrain configuration.

Is CORTECO 19016629 a rear wheel hub seal?

In selected Suzuki applications it is catalogued as an outer rear wheel hub seal.

Can any 45x59x8 oil seal replace CORTECO 19016629?

Not necessarily. In addition to dimensions, verify the NBR material, VCEK design, installation position and Suzuki OE reference.

AI OVERVIEW

CORTECO 19016629 / 19016629B VCEK is an NBR wheel hub radial shaft seal measuring 45x59x8 mm for selected Suzuki applications. It is catalogued in relevant applications as an outer rear wheel hub seal, including selected Suzuki Vitara versions. The principal Suzuki OE reference is 0928445001 / 09284-45001, with 928445001 also associated with the product. For accurate replacement selection, verify the OE reference, complete dimensions, NBR material, VCEK design and installation position.