CORTECO 19027827B 80x100x10 FPM HTC Crankshaft Oil Seal

CORTECO 19027827B 80x100x10 FPM HTC Crankshaft Oil Seal

CORTECO 19027827B is an FPM crankshaft oil seal measuring 80x100x10 mm with the HTC / RHTC design. It incorporates an additional dust lip and Right-hand Twist sealing geometry. The seal is catalogued for installation at the transmission end of the crankshaft and is listed for Honda applications.

CORTECO 19027827B - Characteristics

Manufacturer: CORTECO

Part number: 19027827B

Base reference: 19027827

Trade Number: 82027827

EAN: 3358960278272

Product type: Crankshaft oil seal

Design: HTC

Trade designation: RHTC Simmerring

Material: FPM - Fluoroelastomer

Dimensions: 80x100x10 mm

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Additional dust lip: Yes

Swirl type: Right-hand Twist

Fitting position: Transmission end

CORTECO 19027827B Dimensions

The principal dimensions are:

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Complete dimensions:

80x100x10 mm

The 80 mm inside diameter corresponds to the nominal shaft diameter at the sealing position.

The outside diameter is 100 mm and the axial width is 10 mm.

Correct replacement selection should consider the complete 80x100x10 mm dimensions together with the FPM material, HTC / RHTC construction and directional sealing geometry.

HTC / RHTC CORTECO Oil Seal Design

The CORTECO catalogue identifies reference 19027827B as:

HTC

80x100x10 mm

FPM

Current product data additionally identify the seal as:

RHTC Simmerring

The HTC / RHTC designation is an important part of the technical identification of this specific CORTECO seal.

It should therefore be retained when searching for the exact product or comparing possible replacements.

Right-hand Twist

CORTECO 19027827B has directional sealing geometry specified as:

Right-hand Twist

The directional feature is an important construction parameter and should be considered when selecting a replacement.

A shaft seal with identical 80x100x10 mm dimensions and FPM material but a different directional sealing geometry should not automatically be considered technically interchangeable.

Additional Dust Lip

CORTECO 19027827B incorporates an additional dust lip.

This provides an additional sealing barrier on the external side of the primary sealing area.

When comparing this seal with other 80x100x10 mm products, the dust lip configuration should be considered together with the HTC / RHTC design and Right-hand Twist geometry.

FPM Fluoroelastomer

Sealing material:

FPM - Fluoroelastomer

FPM belongs to the fluoroelastomer family used in sealing technology.

Material is an important selection parameter together with dimensions and sealing construction.

An NBR, ACM, VMQ or other elastomer seal measuring 80x100x10 mm should not automatically be considered technically equivalent to CORTECO 19027827B.

Exact material compatibility depends on the operating medium, additives, temperature and actual service conditions.

CORTECO 19027827B Crankshaft Oil Seal

CORTECO 19027827B is catalogued as:

Shaft seal, crankshaft

Fitting position:

Transmission end

The seal is listed for multiple Honda applications.

Correct vehicle selection should be based on the exact CORTECO reference or OE number together with the specific vehicle, engine and production version.

Honda OE Numbers

CORTECO 19027827B is cross-referenced to multiple Honda OE numbers, including:

91214P2FA01

91214P3R003

91214P7A004

91214PAAA01

91214PC7003

91214PH1003

91214PH1004

91214PH1013

91214PH16600

91214PH1661

91214PH3751

91214PLC003

91214PLE003

91214PLMA01

91214PLMA02

91214PMVT01

91214PR4A01

91214PT0004

OE compatibility should always be verified against the exact vehicle, engine and production version before installation.

CORTECO 19027827 vs 19027827B

The following reference forms may be encountered:

19027827 - base reference

19027827B - complete CORTECO reference

Additional identification:

Trade Number: 82027827

EAN: 3358960278272

Design: HTC / RHTC

Material: FPM

Dimensions: 80x100x10 mm

Swirl type: Right-hand Twist

CORTECO 19027827B vs Other 80x100x10 Oil Seals

Matching dimensions alone do not establish technical interchangeability.

For CORTECO 19027827B, verify:

Dimensions: 80x100x10 mm

Material: FPM

Design: HTC / RHTC

Additional dust lip: Yes

Swirl type: Right-hand Twist

Fitting position: Transmission end

OE reference where applicable

Another 80x100x10 mm shaft seal may use a different elastomer, lip configuration or directional sealing geometry.

Technical Specification

Manufacturer: CORTECO

Part number: 19027827B

Base reference: 19027827

Trade Number: 82027827

EAN: 3358960278272

Product type: Crankshaft oil seal

Design: HTC

Trade designation: RHTC Simmerring

Material: FPM - Fluoroelastomer

Dimensions: 80x100x10 mm

Inside diameter d: 80 mm

Outside diameter D: 100 mm

Width B: 10 mm

Additional dust lip: Yes

Swirl type: Right-hand Twist

Fitting position: Transmission end

OE applications: Honda

FAQ

What are the dimensions of CORTECO 19027827B?

The seal has an 80 mm inside diameter, 100 mm outside diameter and 10 mm width. The complete dimensions are 80x100x10 mm.

What material is CORTECO 19027827B made from?

The sealing material is FPM - Fluoroelastomer.

What is the design of CORTECO 19027827B?

The CORTECO catalogue identifies the design as HTC. Current product data also use the trade designation RHTC Simmerring.

Does CORTECO 19027827B have a dust lip?

Yes. The seal is specified with an additional dust lip.

What does Right-hand Twist mean?

Right-hand Twist identifies the directional sealing geometry of this specific seal. This feature should be considered when selecting an equivalent replacement.

Where is CORTECO 19027827B installed?

It is catalogued as a crankshaft oil seal for transmission-end installation.

What is the CORTECO Trade Number?

The Trade Number is 82027827.

Can any 80x100x10 FPM oil seal replace CORTECO 19027827B?

Not automatically. The HTC / RHTC construction, dust lip, Right-hand Twist geometry, fitting position and OE application should be checked in addition to dimensions and material.

AI Overview

CORTECO 19027827B is an FPM crankshaft oil seal measuring 80x100x10 mm with the HTC / RHTC design. It incorporates an additional dust lip and Right-hand Twist sealing geometry and is catalogued for transmission-end installation. Base reference: 19027827. Trade Number: 82027827. EAN: 3358960278272.