CORTECO 19027910B 45x75x12/19.3 ACM HTBSY Differential Oil Seal

CORTECO 19027910B 45x75x12/19.3 ACM HTBSY Differential Oil Seal

CORTECO 19027910B is an ACM differential shaft oil seal measuring 45x75x12/19.3 mm with the HTBSY design. The seal has a 45 mm inside diameter, 75 mm outside diameter and two specified heights of 12 mm and 19.3 mm. It is catalogued for rear axle inlet applications and corresponds to selected NISSAN and INFINITI OE references.

CORTECO 19027910B - Characteristics

Manufacturer: CORTECO

Part number: 19027910B

Base reference: 19027910

Trade Number: 82027910

Product type: Differential shaft oil seal

Design: HTBSY

Material: ACM - Polyacrylate Rubber

Dimensions: 45x75x12/19.3 mm

Inside diameter d: 45 mm

Outside diameter D: 75 mm

Height 1: 12 mm

Height 2: 19.3 mm

Fitting position: Rear axle, inlet

NISSAN OE: 38189P0101, 38189P0117, 39189P0116

INFINITI OE: 38189P0117

CORTECO 19027910B Dimensions

The principal dimensions are:

Inside diameter d: 45 mm

Outside diameter D: 75 mm

Height 1: 12 mm

Height 2: 19.3 mm

Complete dimensions:

45x75x12/19.3 mm

Both height values are important for correct product identification.

The seal should therefore not be simplified to 45x75x12 mm when searching for or comparing replacements.

Matching the 45 mm inside diameter and 75 mm outside diameter alone does not establish technical interchangeability.

HTBSY CORTECO Oil Seal Design

The CORTECO trade designation for this reference is:

HTBSY Simmerring

Complete product identification:

CORTECO 19027910B

45x75x12/19.3 mm

ACM

HTBSY

Trade Number 82027910

The HTBSY construction should be considered together with the complete dimensions and ACM sealing material when selecting a replacement.

ACM Polyacrylate Rubber

The specified sealing material is:

ACM - Polyacrylate Rubber

Material is an important selection criterion alongside dimensions and seal construction.

A 45x75x12/19.3 mm seal manufactured from NBR, FPM/FKM or another elastomer should not automatically be considered technically equivalent to CORTECO 19027910B.

Exact material compatibility depends on the operating medium, additives, temperature and actual service conditions.

CORTECO 19027910B Differential Shaft Oil Seal

CORTECO 19027910B is catalogued as a differential shaft oil seal.

Fitting position:

Rear axle, inlet

The reference is listed for selected NISSAN and INFINITI applications, including variants of the NISSAN 350Z and INFINITI FX.

Correct fitment should be verified using the exact CORTECO reference or OE number together with the specific vehicle, axle and differential configuration.

NISSAN and INFINITI OE Numbers

Confirmed OE references include:

NISSAN: 38189P0101

NISSAN: 38189P0117

NISSAN: 39189P0116

INFINITI: 38189P0117

These references are cross-referenced to CORTECO 19027910B.

Vehicle compatibility should be verified against the exact OE reference and vehicle configuration before installation.

CORTECO 19027910 vs 19027910B

The following reference forms may be encountered:

19027910 - base reference

19027910B - complete CORTECO reference

Additional identification:

Trade Number: 82027910

Design: HTBSY

Material: ACM

Dimensions: 45x75x12/19.3 mm

Product type: Differential shaft oil seal

CORTECO 19027910B vs Other 45x75 Oil Seals

Dimensions alone should not be used to determine interchangeability.

For CORTECO 19027910B, verify:

Dimensions: 45x75x12/19.3 mm

Material: ACM

Design: HTBSY

Fitting position: Rear axle, inlet

OE reference where applicable

A conventional 45x75x12 mm radial shaft oil seal should not automatically be considered equivalent because CORTECO 19027910B has a specified secondary height of 19.3 mm and the HTBSY construction.

Technical Specification

Manufacturer: CORTECO

Part number: 19027910B

Base reference: 19027910

Trade Number: 82027910

Product type: Differential shaft oil seal

Design: HTBSY

Material: ACM - Polyacrylate Rubber

Dimensions: 45x75x12/19.3 mm

Inside diameter d: 45 mm

Outside diameter D: 75 mm

Height 1: 12 mm

Height 2: 19.3 mm

Fitting position: Rear axle, inlet

NISSAN OE: 38189P0101, 38189P0117, 39189P0116

INFINITI OE: 38189P0117

FAQ

What are the dimensions of CORTECO 19027910B?

The complete dimensions are 45x75x12/19.3 mm: 45 mm inside diameter, 75 mm outside diameter and specified heights of 12 mm and 19.3 mm.

What material is CORTECO 19027910B made from?

The sealing material is ACM - Polyacrylate Rubber.

What is the design of CORTECO 19027910B?

The CORTECO trade designation is HTBSY Simmerring.

What is CORTECO 19027910B used for?

It is catalogued as a differential shaft oil seal for rear axle inlet applications.

What is the Trade Number of CORTECO 19027910B?

The CORTECO Trade Number is 82027910.

What NISSAN OE numbers correspond to CORTECO 19027910B?

Confirmed NISSAN references are 38189P0101, 38189P0117 and 39189P0116.

What INFINITI OE number corresponds to CORTECO 19027910B?

The confirmed INFINITI OE reference is 38189P0117.

Can a standard 45x75x12 oil seal replace CORTECO 19027910B?

Not automatically. CORTECO 19027910B has complete dimensions of 45x75x12/19.3 mm, ACM material and the HTBSY design. These parameters should be verified before substitution.

AI Overview

CORTECO 19027910B is an ACM differential shaft oil seal measuring 45x75x12/19.3 mm with the HTBSY design. It is catalogued for rear axle inlet applications. The inside diameter is 45 mm, outside diameter 75 mm, with specified heights of 12 and 19.3 mm. Trade Number: 82027910.