CORTECO 19035151B 50x70x9 NBR HSAE Oil Seal

CORTECO 19035151B 50x70x9 NBR HSAE Oil Seal

CORTECO 19035151B is a radial shaft oil seal measuring 50x70x9 mm, manufactured from NBR.

Manufacturer: CORTECO

Manufacturer reference: 19035151B

Base reference: 19035151

Trade Number: 82035151

Exact design designation: HSAE Simmerring

Product type: Radial shaft oil seal / wheel hub oil seal

Dimensions: 50x70x9 mm

Material: NBR - Nitrile Butadiene Rubber

Fitting Position: Rear Axle, both sides, inner

Toyota OE: 9031050001, 9031050005, 9031050006, 9031050032, 9031050039, 9031150030

The complete product identification combines the CORTECO 19035151B reference, 50x70x9 mm dimensions, NBR material, HSAE Simmerring design and corresponding Toyota OE references.

CORTECO 19035151B Dimensions

The principal dimensions are:

Inside diameter / nominal shaft diameter d: 50 mm

Outside diameter D: 70 mm

Width B: 9 mm

Complete dimensions: 50x70x9 mm

The first dimension corresponds to the nominal shaft diameter, the second to the outside diameter and the third to the width of the seal.

All three dimensions should be verified when selecting a replacement.

Matching the 50x70x9 mm dimensions alone does not establish complete technical interchangeability.

HSAE Simmerring Design

The exact CORTECO design designation is:

Design: HSAE Simmerring

CORTECO reference: 19035151B

Material: NBR

Dimensions: 50x70x9 mm

Trade Number: 82035151

HSAE is the specific design designation associated with this CORTECO reference.

The HSAE designation should not automatically be replaced with a generic SC, AO/TC or another standard oil seal designation solely because another seal has the same nominal dimensions.

When selecting a replacement, the exact design should be considered together with the dimensions, NBR material and application requirements.

NBR Nitrile Butadiene Rubber

The sealing material of CORTECO 19035151B is:

Material: NBR - Nitrile Butadiene Rubber

NBR is widely used as an elastomer in radial shaft sealing applications.

The sealing material is an important selection criterion alongside dimensions, seal design and actual operating conditions.

A 50x70x9 mm oil seal manufactured from FPM/FKM, ACM, HNBR or another elastomer should not automatically be considered materially equivalent to CORTECO 19035151B.

Exact compatibility depends on the medium, additives, temperature and actual operating conditions.

Specific maximum temperature, pressure, shaft speed or hardness values should not be assigned to this exact reference without direct confirmation for CORTECO 19035151B.

CORTECO 19035151B Rear Axle Wheel Hub Oil Seal

CORTECO 19035151B is catalogued as a wheel hub shaft seal.

Product type: Wheel hub oil seal

Fitting Position: Rear Axle

Side: Both sides

Position: Inner

CORTECO reference: 19035151B

Dimensions: 50x70x9 mm

Material: NBR

Design: HSAE Simmerring

The fitting position is an important identification characteristic, but the required Toyota OE reference and exact vehicle configuration should also be verified before installation.

CORTECO 19035151B Toyota Oil Seal

CORTECO 19035151B corresponds to several Toyota OE references:

Toyota OE: 9031050001

Toyota OE: 9031050005

Toyota OE: 9031050006

Toyota OE: 9031050032

Toyota OE: 9031050039

Toyota OE: 9031150030

CORTECO reference: 19035151B

Trade Number: 82035151

These OE references are important identification points when searching for the corresponding CORTECO wheel hub oil seal.

The required OE number should be verified against the specific vehicle and assembly before installation.

Toyota 9031050001 CORTECO 19035151B

One of the Toyota OE references cross-referenced to CORTECO 19035151B is:

Toyota OE: 9031050001

CORTECO reference: 19035151B

Dimensions: 50x70x9 mm

Material: NBR

Design: HSAE Simmerring

The OE reference should be verified against the technical documentation for the specific vehicle before selecting the seal.

Toyota 9031050005 and 9031050006

CORTECO 19035151B is also cross-referenced to:

Toyota OE: 9031050005

Toyota OE: 9031050006

Both references should be retained in the product description because they can be used when identifying or searching for the corresponding oil seal.

Toyota 9031050032 and 9031050039

Additional Toyota OE references associated with CORTECO 19035151B are:

Toyota OE: 9031050032

Toyota OE: 9031050039

The OE references should be considered together with the complete CORTECO reference, dimensions and HSAE design.

Toyota 9031150030 CORTECO 19035151B

CORTECO 19035151B is also cross-referenced to:

Toyota OE: 9031150030

CORTECO reference: 19035151B

Trade Number: 82035151

Dimensions: 50x70x9 mm

Material: NBR

Design: HSAE Simmerring

CORTECO 19035151B for Toyota Hilux, Hiace, Land Cruiser and 4Runner

CORTECO 19035151B is catalogued for selected versions within several Toyota vehicle families, including:

Toyota: Hilux

Toyota: Hiace

Toyota: Land Cruiser

Toyota: 4Runner

Toyota: Dyna

Exact compatibility depends on the vehicle version, production period, axle configuration and required OE reference.

The vehicle model name alone should not be used as the sole selection criterion.

For accurate identification, verify the required Toyota OE number and the complete CORTECO 19035151B reference.

CORTECO 19035151B Reference Numbers

Manufacturer: CORTECO

Manufacturer reference: 19035151B

Base reference: 19035151

Trade Number: 82035151

Design: HSAE Simmerring

Toyota OE: 9031050001

Toyota OE: 9031050005

Toyota OE: 9031050006

Toyota OE: 9031050032

Toyota OE: 9031050039

Toyota OE: 9031150030

Dimensions: 50x70x9 mm

Material: NBR

Fitting Position: Rear Axle, both sides, inner

These references and technical characteristics should be considered together when identifying CORTECO 19035151B or selecting a corresponding replacement.

CORTECO 19035151B vs Standard 50x70x9 Oil Seal

A standard radial shaft oil seal measuring 50x70x9 mm should not automatically be considered equivalent to CORTECO 19035151B.

CORTECO 19035151B combines:

Dimensions: 50x70x9 mm

Material: NBR

Design: HSAE Simmerring

Trade Number: 82035151

Catalogue application: Rear axle wheel hub oil seal

Matching the 50 mm shaft diameter, 70 mm outside diameter and 9 mm width alone does not establish complete technical interchangeability.

The exact HSAE design, material, fitting position and OE reference should also be verified.

CORTECO 19035151B HSAE vs 50x70x9 NBR AO/TC

CORTECO 19035151B and a generic 50x70x9 NBR AO/TC oil seal may share the same nominal dimensions and basic sealing material.

This does not establish complete technical equivalence.

CORTECO 19035151B has the exact manufacturer designation:

Design: HSAE Simmerring

The HSAE designation should therefore not automatically be replaced with AO/TC solely because the dimensions and material match.

The exact seal construction and application requirements should be verified before substitution.

How to Select a Replacement for CORTECO 19035151B

When selecting a corresponding radial shaft oil seal, verify:

• CORTECO reference 19035151B
• dimensions 50x70x9 mm
• shaft diameter 50 mm
• outside diameter 70 mm
• width 9 mm
• material NBR
• exact design HSAE Simmerring
• required Toyota OE reference
• rear axle fitting position
• inner installation position
• exact vehicle and axle configuration

Matching the 50x70x9 mm dimensions alone does not confirm complete technical interchangeability.

Technical Specification

Manufacturer: CORTECO

Manufacturer reference: 19035151B

Base reference: 19035151

Trade Number: 82035151

Product type: Radial shaft oil seal / wheel hub oil seal

Exact design designation: HSAE Simmerring

Dimensions: 50x70x9 mm

Shaft diameter d: 50 mm

Outside diameter D: 70 mm

Width B: 9 mm

Material: NBR - Nitrile Butadiene Rubber

Fitting Position: Rear Axle, both sides

Position: Inner

Toyota OE: 9031050001, 9031050005, 9031050006, 9031050032, 9031050039, 9031150030

FAQ

What are the dimensions of CORTECO 19035151B?

CORTECO 19035151B measures 50x70x9 mm.

Shaft diameter d: 50 mm

Outside diameter D: 70 mm

Width B: 9 mm

What is the complete CORTECO reference for 19035151?

Manufacturer reference: 19035151B

Base reference: 19035151

Trade Number: 82035151

What material is CORTECO 19035151B made from?

Material: NBR - Nitrile Butadiene Rubber

What design is CORTECO 19035151B?

Exact design designation: HSAE Simmerring

Where is CORTECO 19035151B installed?

Catalogue data specifies:

Fitting Position: Rear Axle, both sides

Position: Inner

Exact suitability should still be verified using the Toyota OE reference and vehicle configuration.

Which Toyota OE numbers correspond to CORTECO 19035151B?

Toyota OE: 9031050001

Toyota OE: 9031050005

Toyota OE: 9031050006

Toyota OE: 9031050032

Toyota OE: 9031050039

Toyota OE: 9031150030

Does CORTECO 19035151B fit Toyota Hilux?

CORTECO 19035151B is catalogued for selected Toyota Hilux versions. Exact compatibility should be confirmed using the required Toyota OE reference, vehicle version and fitting position.

Does CORTECO 19035151B fit Toyota Land Cruiser?

CORTECO 19035151B is catalogued for selected Toyota Land Cruiser versions. The required Toyota OE reference should be verified before installation.

Can a standard 50x70x9 NBR oil seal replace CORTECO 19035151B?

Not automatically. CORTECO 19035151B has the exact HSAE Simmerring design and is catalogued for a specific fitting position.

Matching the dimensions and NBR material alone does not establish complete technical interchangeability.

Is a 50x70x9 NBR AO/TC oil seal equivalent to CORTECO 19035151B HSAE?

Not necessarily. The exact CORTECO designation is HSAE Simmerring. It should not automatically be treated as equivalent to AO/TC solely because the dimensions and basic material match.

Can any 50x70x9 oil seal replace CORTECO 19035151B?

No. The NBR material, HSAE design, Toyota OE reference, fitting position and actual application requirements should also be verified.

AI Overview

CORTECO 19035151B is an NBR radial shaft oil seal measuring 50x70x9 mm with the exact HSAE Simmerring design. It is catalogued as a rear axle wheel hub oil seal, installed on the inner side on both sides of the axle. It corresponds to Toyota OE references 9031050001, 9031050005, 9031050006, 9031050032, 9031050039 and 9031150030. Trade Number: 82035151. The complete reference, dimensions, NBR material, HSAE design, OE number and fitting position should be considered when selecting a replacement.