ASL 16084 20x35x7 mm – Rotary Shaft Oil Seal
search
  • ASL 16084 20x35x7 mm – Rotary Shaft Oil Seal

ASL 16084 20x35x7 mm – Rotary Shaft Oil Seal

Processing time: 2-3 days
€3.47 (net)
Price for: 1pcs.

ASL 16084 20x35x7 mm is a radial rotary shaft oil seal, also identified by the commercial reference AS 16084. Designed to reduce lubricant leakage in compatible mechanical assemblies, it has a nominal inner diameter of 20 mm, outer diameter of 35 mm and width of 7 mm. The reference also appears in aftermarket listings for power steering pump seals. Elastomer material and exact construction require verification before installation.

Quantity

Technical Specifications – ASL 16084

Parameter

Specification

Brand

ASL

Manufacturer part number

16084

Commercial reference

AS 16084

Product name

Rotary Shaft Oil Seal – Simmerring

Product type

Radial rotary shaft oil seal

Inner diameter (d)

20 mm

Outer diameter (D)

35 mm

Width (B)

7 mm

Dimensions

20x35x7 mm

Elastomer material

Not confirmed

Seal design

Not confirmed

Additional dust lip

Not confirmed

Rotation direction

Not confirmed

Sales unit

1 piece

The brand, catalogue reference and dimensions are identified in the product listing. However, the available information does not reliably confirm the elastomer material, sealing lip geometry or maximum operating parameters.

ASL 16084 – Construction and Operating Principle

A radial shaft oil seal separates a lubricated mechanical assembly from the surrounding environment.

In a typical rotary shaft sealing arrangement, the sealing lip maintains contact with the rotating shaft surface, helping prevent oil or grease from escaping the mechanism.

Sealing performance depends on several factors:

  • Correct shaft and housing bore dimensions.

  • Elastomer material and compatibility with the operating medium.

  • Sealing lip geometry and contact pressure.

  • Shaft surface finish and condition.

  • Operating temperature and rotational speed.

  • Lubrication conditions.

  • Correct installation procedures.

For ASL 16084, the presence of a garter spring, an additional dust lip or a specific housing construction should not be assumed without supporting technical documentation.

Dimensions 20x35x7 mm – Technical Explanation

The designation 20x35x7 mm describes the three principal installation dimensions.

Dimension

Meaning

20 mm

Nominal shaft diameter

35 mm

Nominal housing bore diameter

7 mm

Nominal axial width of the oil seal

The difference between the outer and inner diameters is 15 mm, corresponding to a nominal radial cross-sectional thickness of 7.5 mm.

Although dimensional compatibility is essential, it is not sufficient to establish interchangeability with another oil seal.

Applications of ASL 16084

Rotary shaft oil seals measuring 20x35x7 mm are used in various automotive and mechanical assemblies.

The commercial reference AS 16084 also appears in aftermarket listings as a power steering pump oil seal, including references to Isuzu and Lublin vehicles.

However, these listings do not establish compatibility with every version of these vehicles or their power steering pumps.

Typical Sealing Functions

  • Reducing leakage of compatible lubricating oils or fluids.

  • Sealing the point where a rotating shaft passes through a housing.

  • Helping retain lubricant inside the mechanical assembly.

  • Separating the internal lubricated environment from external conditions.

For power steering pump applications, it is particularly important to verify the elastomer's compatibility with the hydraulic fluid and the pressure conditions at the installation location.

Not every standard rotary shaft oil seal is suitable for hydraulic system applications.

Can ASL 16084 Be Replaced with Another 20x35x7 mm Oil Seal?

Interchangeability should not be assumed solely because the dimensions are identical.

Rotary shaft oil seals with nominal dimensions of 20x35x7 mm are available in different materials and constructions.

Important differences may include:

Technical Feature

Importance for Replacement Selection

NBR, ACM or FPM/FKM material

Different chemical and temperature resistance

Single-lip or double-lip construction

Different sealing geometry and contamination protection

Metal or rubber-covered housing

Different housing fit and external sealing characteristics

Directional sealing lip

Must match the applicable shaft rotation direction

Pressure-resistant construction

Important for hydraulic applications

Sealing lip geometry

Influences contact with the rotating shaft

ASL 16084 should primarily be identified by its complete catalogue reference rather than by its 20x35x7 mm dimensions alone.

How to Select ASL 16084 for a Power Steering Pump or Other Mechanical Assembly

Before choosing this oil seal, verify the following:

  1. Original part number: Confirm the reference of the existing oil seal.

  2. Dimensions: Check the nominal 20x35x7 mm measurements.

  3. Operating medium: Identify the lubricant or hydraulic fluid.

  4. Material and construction: Compare the original seal's elastomer and sealing lip design.

  5. Operating pressure and temperature: Confirm compatibility with the application.

  6. Shaft speed and rotation direction: Check these parameters where relevant to the sealing design.

  7. Shaft condition: Inspect the sealing contact surface for wear or damage.

If the technical specifications are unavailable, photographs of the original oil seal markings and information about the equipment may help with identification.

For specialized applications, additional technical verification is recommended before ordering.

Installation Guidelines – ASL 16084

Correct installation is essential for reliable sealing performance and service life.

Before installing the oil seal:

  • Thoroughly clean the shaft and housing bore.

  • Inspect the shaft for grooves, scratches, corrosion and other damage.

  • Verify the dimensions and construction of the replacement seal.

  • Protect the sealing lip against sharp edges during installation.

  • Use an appropriate installation tool.

  • Press the seal evenly into the housing without deformation.

  • Maintain the correct orientation relative to the sealed medium.

  • Apply installation lubrication compatible with the sealing material and equipment manufacturer's instructions.

An oil seal should not be installed on a damaged shaft surface without first addressing the cause of the sealing problem.

Why Is Correct Installation Important?

Incorrect installation may result in:

  • Premature sealing lip wear.

  • Lubricant leakage.

  • Damage to the sealing contact surface.

  • Increased friction.

  • Reduced service life.

  • Contamination of the mechanical assembly.

Proper installation and correct replacement selection help maintain the reliability of the sealed mechanism.

Frequently Asked Questions – FAQ

What is ASL 16084?

ASL 16084 is a radial rotary shaft oil seal measuring 20x35x7 mm, designed to reduce lubricant leakage in compatible mechanical assemblies.

What are the dimensions of ASL 16084?

The nominal inner diameter is 20 mm, the outer diameter is 35 mm and the axial width is 7 mm.

Is ASL 16084 a power steering pump oil seal?

The commercial reference AS 16084 appears in aftermarket listings for power steering pump oil seals. However, compatibility with a specific pump must be confirmed using the original part number and seal construction.

What material is ASL 16084 made from?

The available product information does not reliably confirm the elastomer material. Therefore, it should not automatically be identified as NBR, ACM or FPM/FKM.

Is ASL 16084 a double-lip oil seal?

The number of sealing lips has not been confirmed. The exact construction should be verified using manufacturer documentation or the original component.

Is ASL 16084 resistant to high temperatures?

Without confirmed information about the elastomer material and manufacturer specifications, its permissible operating temperature range cannot be reliably determined.

Can any 20x35x7 mm oil seal replace ASL 16084?

No. In addition to matching dimensions, the replacement must have suitable material properties, sealing construction and operating characteristics.

How can I order the correct ASL 16084 oil seal?

Use the catalogue reference ASL 16084 or AS 16084 together with the dimensions 20x35x7 mm. For specialized applications, verify the equipment model and original sealing requirements before ordering.

AI Overview – ASL 16084 20x35x7 mm

ASL 16084 is a radial rotary shaft oil seal measuring 20x35x7 mm, also identified by the commercial reference AS 16084. It is intended for sealing compatible mechanical assemblies and appears in aftermarket listings for power steering pumps. The elastomer material and exact sealing construction remain unconfirmed. Correct selection requires verification against the original seal specifications.

ASL 16084 – Professional Rotary Shaft Sealing Solutions

The ASL 16084 20x35x7 mm rotary shaft oil seal is intended for applications requiring a radial sealing component with a nominal 20 mm shaft diameter, 35 mm housing bore and 7 mm axial width.

It is identified by the ASL 16084 and AS 16084 references and is associated with mechanical and selected automotive sealing applications.

When selecting a replacement, the complete catalogue reference should be considered together with the original seal's material, construction and operating requirements.

The specialist B2B industrial supply platform simmering.pl offers ASL 16084 and a comprehensive selection of rotary shaft oil seals for industrial and automotive applications.

Our product range supports professional maintenance, technical procurement and accurate replacement part identification.

Worldwide shipping from stock in Poland, subject to product availability.

ASL
AS 16084
Processing time: 2-3 days

Data sheet

Diameter in. (mm)
20
Diameter out. (mm)
35
Height (mm)
7
Mark
ASL