609 ZZ ABEG 9x24x7 - Deep Groove Ball Bearing

609 ZZ ABEG 9x24x7 - Deep Groove Ball Bearing

609 ZZ ABEG 9x24x7 mm is a single-row deep groove ball bearing with metal shields on both sides. It has a 9 mm bore diameter, 24 mm outside diameter and 7 mm width. The ZZ designation indicates two metal shields, which help protect the raceways and rolling elements against contamination while retaining lubricant inside the bearing.

Technical Data - 609 ZZ ABEG

609 ZZ Bearing Dimensions

The principal dimensions of the bearing are:

9x24x7 mm

which means:

• d: 9 mm - bore diameter

• D: 24 mm - outside diameter

• B: 7 mm - bearing width

The bearing is therefore nominally designed for a 9 mm shaft and a housing corresponding to its 24 mm outside diameter.

When selecting a replacement, however, the three basic dimensions should not be the only criteria considered.

What Does 609 Mean?

The designation 609 identifies a deep groove ball bearing with the principal dimensions:

9x24x7 mm

It is a compact ball bearing suitable for mechanisms where installation space is limited.

The deep raceway geometry characteristic of deep groove ball bearings enables this bearing type to accommodate primarily radial loads as well as appropriate axial loads in both directions.

What Does ZZ Mean?

The suffix:

ZZ

indicates that the bearing is equipped with two metal shields, one on each side.

Depending on the manufacturer's designation system, the equivalent construction may also be described using the suffix:

2Z

Metal shields help to:

• reduce the ingress of dust and small contaminants

• protect the raceways and rolling elements

• retain lubricant inside the bearing

Metal shields are commonly used where protection is required while maintaining relatively low friction associated with the bearing closures.

Single-Row Deep Groove Ball Bearing

609 ZZ ABEG is a single-row deep groove ball bearing.

Its basic construction consists of:

• inner ring

• outer ring

• balls

• cage

• two metal shields

Deep groove ball bearings are among the most widely used rolling bearing designs because they combine compact construction with the ability to accommodate radial loads and appropriate axial loads.

609 ZZ vs 609 2RS

Bearings designated:

609 ZZ

and:

609 2RS

may have the same principal dimensions:

9x24x7 mm

but they differ primarily in their sealing arrangement.

609 ZZ

Equipped with metal shields on both sides.

609 2RS

Equipped with elastomer seals on both sides.

The ZZ version is generally selected where low closure-related friction is important.

A 2RS version provides a different level of protection against contamination and moisture due to its elastomer sealing arrangement.

The two versions should not automatically be considered interchangeable without considering the actual operating conditions.

Radial and Axial Loads

Deep groove ball bearings are primarily designed to accommodate radial loads.

Their deep raceway geometry also allows them to accommodate appropriate axial loads acting in either direction.

Actual load-carrying capability depends on the specific bearing design and operating conditions.

For 609 ZZ ABEG, specific dynamic and static load ratings should not be copied from equivalent 609 bearings manufactured by other brands without confirmed ABEG technical documentation.

Internal Clearance

The designation:

609 ZZ ABEG

does not include an additional clearance suffix such as C3.

A specific internal clearance class should therefore not be added to the product specification without confirmation from the relevant product documentation.

If the application requires a particular internal clearance, this parameter should be verified before installation.

Bearing Cage

The cage material and exact cage design for 609 ZZ ABEG should not be specified without confirmed ABEG technical documentation.

Specifications taken from equivalent 609 bearings manufactured by other brands should not automatically be assigned to the ABEG product.

Bearing Speed

A specific limiting or reference speed is not stated here because a reliable ABEG technical specification confirming this value for 609 ZZ has not been established.

Permissible operating speed depends on factors including:

• bearing design

• closure type

• lubrication

• load

• operating temperature

• fits

• cooling conditions

Speed ratings published for a 609 bearing from another manufacturer should not automatically be treated as technical data for the ABEG bearing.

Applications of 609 ZZ ABEG

Due to its compact 9x24x7 mm dimensions, a 609 ZZ bearing can be used in appropriately designed:

• small drive systems

• electric motors

• fans

• power tools

• workshop equipment

• rotating mechanisms

• machinery

• technical equipment

Suitability for a specific application should always be verified according to load, speed, temperature, lubrication and environmental conditions.

How to Select a 609 ZZ Bearing

When replacing a bearing, verify:

1. 609 designation.

2. Bore diameter 9 mm.

3. Outside diameter 24 mm.

4. Width 7 mm.

5. Metal shields on both sides - ZZ.

6. Required internal clearance.

7. Required load ratings.

8. Operating speed.

9. Lubrication conditions.

10. Operating temperature and environment.

Matching the 9x24x7 mm dimensions alone does not guarantee full interchangeability between two bearings.

609 ZZ vs 608 ZZ

609 ZZ and 608 ZZ have similar construction but different dimensions.

609 ZZ

9x24x7 mm

608 ZZ

8x22x7 mm

The 609 ZZ has a larger bore and outside diameter. Therefore, 609 ZZ and 608 ZZ are not dimensionally interchangeable.

Alternative Search Terms

The product may also be searched as:

• 609 ZZ ABEG

• 609ZZ ABEG

• ABEG 609 ZZ

• 609 ZZ 9x24x7

• 609ZZ 9x24x7

• 609 2Z 9x24x7

• 609 ZZ bearing

• ABEG 609 bearing

• 609 deep groove ball bearing

• 609 bearing 9x24x7

• ball bearing 9x24x7

• 9 mm bore bearing

• 609 metal shielded bearing

• deep groove ball bearing 609 ZZ

• 609 ZZ 9 mm bearing

FAQ

What are the dimensions of the 609 ZZ ABEG bearing?

The bearing measures 9x24x7 mm: 9 mm bore diameter, 24 mm outside diameter and 7 mm width.

Is 609 ZZ a deep groove ball bearing?

Yes. 609 ZZ ABEG is a single-row deep groove ball bearing.

What does ZZ mean on a bearing?

ZZ indicates metal shields fitted on both sides of the bearing.

Do ZZ and 2Z both indicate metal shields?

Both designations are commonly used for bearings with two metal shields. However, when comparing products from different manufacturers, the exact manufacturer's designation should always be checked.

What is the bore diameter of 609 ZZ?

The bore diameter is 9 mm.

What is the outside diameter?

The outside diameter is 24 mm.

What is the width of the bearing?

The bearing width is 7 mm.

What is the difference between 609 ZZ and 609 2RS?

609 ZZ uses metal shields on both sides, while 609 2RS uses elastomer seals on both sides.

Are 609 ZZ and 608 ZZ interchangeable?

No. 609 ZZ measures 9x24x7 mm, while 608 ZZ measures 8x22x7 mm.

What is the load rating of 609 ZZ ABEG?

A specific ABEG load rating is not stated without confirmed technical documentation. Load ratings from equivalent 609 bearings made by other manufacturers should not automatically be assigned to the ABEG product.

609 ZZ ABEG - Quick Technical Answer

609 ZZ ABEG 9x24x7 mm is a single-row deep groove ball bearing with metal shields on both sides. It has a 9 mm bore, 24 mm outside diameter and 7 mm width. The ZZ construction helps protect the rolling elements and retain lubricant while maintaining relatively low closure-related friction.

609 ZZ ABEG at simmering.pl

609 ZZ ABEG 9x24x7 is available from simmering.pl, a specialist B2B supplier of deep groove ball bearings, industrial bearings and technical sealing solutions.

Stock and technical service are located in Lublin, Poland, with worldwide shipping available.