608 ABEG single row deep groove ball bearing, 8x22x7 mm. Compact bearing from the 60 dimensional series, featuring an open construction without shields or seals. Designed to accommodate radial loads and limited axial loads in both directions. When selecting this bearing, verify internal clearance, mounting fits, lubrication and operating conditions. Available through the specialized B2B trading platform simmering.pl, with stock in Lublin, Poland, and worldwide shipping.
|
Parameter |
Specification |
|---|---|
|
Brand |
ABEG |
|
Complete designation |
608 ABEG |
|
Basic bearing designation |
608 |
|
Bearing type |
Single row deep groove ball bearing |
|
Dimensional series |
60 |
|
Bore diameter d |
8 mm |
|
Outside diameter D |
22 mm |
|
Width B |
7 mm |
|
Dimensions d x D x B |
8x22x7 mm |
|
Construction |
Single row, deep groove raceways |
|
Rolling elements |
Balls |
|
Shields and seals |
None in the basic open execution |
|
Load direction |
Radial and axial in both directions |
The designation 608 ABEG identifies the bearing type, dimensional series and brand.
6 - Identifies a single row deep groove ball bearing.
0 - Part of the dimensional series designation 60.
8 - Bore code corresponding to an 8 mm nominal bore diameter.
ABEG - Bearing brand and classification system associated with Findling Wälzlager.
The designation 608 ABEG does not contain additional suffixes specifying shields, seals, increased radial internal clearance or a special bearing execution.
The absence of ZZ or 2RS suffixes indicates the basic open construction. However, the actual bearing and packaging markings should be checked when identifying a specific supplied product.
Common written variations include:
608 ABEG
ABEG 608
608-ABEG
608 8x22x7 ABEG
ABEG 608 8x22x7 mm
The basic dimensional designation 608 is also used by other bearing manufacturers.
However, matching dimensions do not automatically establish identical technical specifications.
No unverified OEM references or cross-manufacturer equivalents have been assigned to this product.
The 608 ABEG is a compact single row deep groove ball bearing consisting of an inner ring, an outer ring, one row of balls and a cage that maintains the correct spacing between the rolling elements.
The balls roll along deep raceways formed in both bearing rings.
This geometry enables the bearing to accommodate primarily radial loads, together with limited axial loads in both directions.
The basic open construction provides access to the rolling elements, allowing lubrication to be supplied according to the requirements of the bearing arrangement.
However, the absence of shields means that appropriate protection against contamination and moisture must be provided by the surrounding assembly.
Its compact dimensions of 8x22x7 mm make this bearing type suitable for small rotating mechanisms where installation space is limited.
Bearings with the basic designation 608 are available in different executions. They may share identical mounting dimensions while having different operating characteristics.
|
Feature |
608 |
608 ZZ |
608 2RS |
|---|---|---|---|
|
Dimensions |
8x22x7 mm |
8x22x7 mm |
8x22x7 mm |
|
Bearing type |
Deep groove ball bearing |
Deep groove ball bearing |
Deep groove ball bearing |
|
Construction |
Open |
Metal shielded |
Sealed |
|
Shields or seals |
None |
Metal shields on both sides |
Seals on both sides |
|
Access to rolling elements |
Open construction |
Restricted |
Restricted |
|
Contamination protection |
Requires external protection |
Helps restrict larger contaminants |
Depends on seal construction |
|
Lubrication |
Depends on bearing arrangement |
Depends on execution |
Depends on execution |
Important: 608 ABEG and 608 ZZ ABEG are not identical bearing executions. The ZZ version incorporates metal shields on both sides.
Similarly, a 608 2RS bearing should not automatically be considered interchangeable with the open version.
Before purchasing 608 ABEG, verify dimensional compatibility and the operating conditions of the equipment.
Important selection criteria include:
Shaft diameter of 8 mm.
Housing bore diameter of 22 mm.
Bearing width of 7 mm.
Required open, shielded or sealed execution.
Radial internal clearance appropriate for the application.
Rotational speed.
Radial and axial loads.
Operating temperature.
Lubrication method.
Protection against dust, moisture and other contaminants.
A bearing from another manufacturer with dimensions of 8x22x7 mm may be dimensionally compatible, but full interchangeability requires comparison of the relevant technical specifications.
Particular attention should be paid to shields, seals, internal clearance, accuracy class and lubrication requirements.
Deep groove ball bearings of the 608 series are commonly used in small rotating assemblies requiring compact dimensions and the ability to accommodate radial and limited axial loads.
Typical applications for this bearing type include:
Small rotating mechanisms.
Guide rollers and rotating components.
Compact drive assemblies.
Light-duty conveying mechanisms with suitable operating loads.
Technical equipment using shafts with an 8 mm diameter.
These are typical applications of the 608 bearing type, not confirmed OEM applications for the exact 608 ABEG product.
The open bearing execution requires appropriate lubrication and protection against contamination.
Before installation, clean the shaft, housing and bearing seating surfaces.
The bearing should be installed using the correct fits specified for the equipment.
When mounting the inner ring with an interference fit, apply mounting force directly to the inner ring. When pressing the outer ring into a housing, apply force directly to the outer ring.
Never transmit mounting forces through the balls or raceways.
For an open bearing execution, ensure that appropriate lubrication and protection against contamination are provided.
Store the bearing in a clean, dry environment, preferably in its original packaging.
The 608 ABEG bearing has an 8 mm bore diameter, 22 mm outside diameter and 7 mm width. Its complete dimensions are 8x22x7 mm.
It is a single row deep groove ball bearing belonging to the 60 dimensional series.
The basic 608 designation without a ZZ suffix indicates an open bearing execution. A version with metal shields on both sides is commonly designated 608 ZZ.
The basic 608 bearing has an open construction. The 608 ZZ variant features metal shields on both sides that help restrict contamination.
Both have the same nominal dimensions of 8x22x7 mm, but they differ in sealing construction. Interchangeability must be evaluated according to the application's operating requirements.
Yes. The deep groove ball bearing design can accommodate limited axial loads in both directions, in addition to radial loads.
The supplied designation does not include a C3 suffix. Increased internal clearance should not be assumed without confirmation from the technical documentation for the exact bearing execution.
Bearings with the basic designation 608 generally share nominal dimensions of 8x22x7 mm. However, shields, seals, internal clearance, accuracy, load ratings and lubrication requirements must be checked before replacement.
608 ABEG is a single row deep groove ball bearing with dimensions of 8x22x7 mm, belonging to the 60 dimensional series. The basic 608 designation identifies an open bearing construction without shields or seals. It accommodates radial loads and limited axial loads in both directions. Correct selection requires consideration of mounting fits, lubrication and operating conditions.
The 608 ABEG bearing can be ordered through the specialized B2B trading platform simmering.pl, serving industrial customers from stock in Poland, with worldwide shipping.