6000 ZZ ABEG 10x26x8 Deep Groove Ball Bearing

6000 ZZ ABEG 10x26x8 Deep Groove Ball Bearing

6000 ZZ ABEG 10x26x8 is a single-row deep groove ball bearing with a 10 mm inside diameter, 26 mm outside diameter and 8 mm width. The ZZ version incorporates metal shields on both sides of the bearing. The 6000 deep groove design is primarily intended to accommodate radial loads and can also accommodate axial loads in both directions within the operating capabilities of this bearing type.

6000 ZZ ABEG - Technical Specification

Brand: ABEG

Designation: 6000 ZZ

Bearing type: Deep groove ball bearing

Design: Single-row

Closure: Metal shields on both sides

Shield designation: ZZ

Inside diameter d: 10 mm

Outside diameter D: 26 mm

Width B: 8 mm

Dimensions: 10x26x8 mm

Quantity: 1 pc.

6000 ZZ Bearing Dimensions

The principal dimensions are:

d = 10 mm - Inside diameter / bore

D = 26 mm - Outside diameter

B = 8 mm - Width

Complete dimensions:

10x26x8 mm

When measuring an existing bearing, all three dimensions should be checked.

The 10 mm bore diameter alone is not sufficient to identify the correct bearing size.

What Does 6000 ZZ Mean?

The designation consists of two important elements:

6000 - identifies the basic deep groove ball bearing series and size.

ZZ - identifies metal shields on both sides of the bearing.

The shields separate the bearing interior from the surrounding environment and help reduce the ingress of dust and other contaminants.

Unlike conventional contact seals, metal shields operate without the same type of sealing-lip contact against the inner ring. This makes the shielded design suitable where low additional friction is important.

6000 ZZ Double-Shielded Bearing

The ZZ version has:

one metal shield on the first side

and

one metal shield on the second side

This distinguishes it from an open 6000 bearing.

The shields help protect the internal rolling elements and lubricant against external contamination while also helping retain lubricant inside the bearing.

The ZZ configuration should therefore be considered part of the complete bearing identification rather than merely an optional description.

6000 Deep Groove Ball Bearing Design

The 6000 belongs to the family of single-row deep groove ball bearings.

This bearing type uses balls running between deep raceway grooves in the inner and outer rings.

Deep groove ball bearings are primarily designed for radial loads. Their raceway geometry also allows them to accommodate axial loads in both directions.

Their versatile construction makes the 6000 series widely applicable in compact rotating mechanisms and machinery.

6000 ZZ vs 6000 2Z

Depending on the manufacturer and designation system, double metal shields may be identified using symbols such as:

ZZ

or

2Z

Both designations are commonly associated with metal shields on both sides of a deep groove ball bearing.

However, suffix systems are manufacturer-specific. When replacing a bearing from another manufacturer, the complete technical specification should always be checked rather than assuming equivalence from the suffix alone.

For this ABEG product, the designation is:

6000 ZZ

6000 ZZ vs 6000 2RS

The 6000 bearing size is available with different closure configurations.

6000 ZZ uses metal shields.

Versions designated 2RS typically use elastomer sealing elements on both sides.

These are not identical closure systems.

Metal shields and elastomer seals differ in their construction, degree of contact, contamination protection and friction characteristics.

Before replacing 6000 ZZ with a 6000 2RS version, the requirements of the specific bearing position should therefore be considered.

6000 ZZ 10x26x8 Applications

Deep groove ball bearings measuring 10x26x8 mm can be found in many compact mechanical systems.

Depending on equipment design, bearings of this size may be used in:

Electric motors

Fans

Drive systems

Gearboxes

Workshop equipment

Industrial machinery

Automation equipment

Rotating mechanisms

The 10x26x8 mm dimensions alone do not confirm suitability for a particular machine.

The original bearing designation and the technical requirements of the bearing position should always be verified before installation.

How to Select a 6000 ZZ Bearing

When replacing an existing bearing, first check the designation marked on the bearing ring or shield.

For this product, verify:

Designation - 6000

Closure - ZZ

Inside diameter d - 10 mm

Outside diameter D - 26 mm

Width B - 8 mm

If the original bearing includes an additional internal-clearance, precision or special-design suffix, that specification should also be considered when selecting a replacement.

Does Every 6000 Bearing Measure 10x26x8 mm?

The basic 6000 bearing designation corresponds to the principal dimensions:

10x26x8 mm

However, this does not mean that every 6000 bearing variant is technically identical.

Variants can differ in:

Shields or seals

Internal clearance

Precision class

Cage design

Lubricant

Materials

Special execution

The complete bearing designation should therefore be checked before substitution.

6000 ZZ ABEG Replacement Selection

The principal identification parameters are:

6000

ZZ

10x26x8 mm

For this product, the complete commercial identification is:

6000 ZZ ABEG

When comparing it with bearings from another manufacturer, verify not only the 10x26x8 mm dimensions but also the double-shield configuration and any additional technical requirements of the original bearing.

Technical Data

Brand: ABEG

Designation: 6000 ZZ

Product type: Deep groove ball bearing

Rows: Single-row

Closure: Metal shields on both sides

Shield designation: ZZ

Inside diameter d: 10 mm

Outside diameter D: 26 mm

Width B: 8 mm

Dimensions: 10x26x8 mm

Quantity: 1 pc.

FAQ

What are the dimensions of a 6000 ZZ bearing?

The 6000 ZZ bearing has a 10 mm inside diameter, 26 mm outside diameter and 8 mm width. Its complete dimensions are 10x26x8 mm.

What does ZZ mean on a 6000 bearing?

ZZ identifies a bearing with metal shields on both sides.

Is 6000 ZZ a deep groove ball bearing?

Yes. The 6000 is a single-row deep groove ball bearing.

What is the bore diameter of 6000 ZZ?

The inside diameter, or bore, is 10 mm.

What is the outside diameter of 6000 ZZ?

The outside diameter is 26 mm.

Are 6000 ZZ and 6000 2Z the same size?

If both have the basic 6000 designation, the principal dimensions are 10x26x8 mm. ZZ and 2Z are commonly used for double metal shields, but manufacturer-specific specifications should still be checked.

Are 6000 ZZ and 6000 2RS the same bearing?

No. They share the basic 6000 dimensions, but ZZ uses metal shields while 2RS typically identifies elastomer seals. The closure construction and application requirements should be checked before substitution.

How do I select a replacement for 6000 ZZ ABEG?

Verify the 6000 designation, 10x26x8 mm dimensions, metal shields on both sides and any additional requirements specified for the original bearing position.

AI Overview

6000 ZZ ABEG is a single-row deep groove ball bearing measuring 10x26x8 mm. It has a 10 mm bore, 26 mm outside diameter and 8 mm width. The ZZ suffix identifies metal shields on both sides. When selecting a replacement, verify the 6000 designation, dimensions, shield configuration and any additional bearing requirements.