BECO 6201 BHTS ZZ C4 high temperature single row deep groove ball bearing, 12x32x10 mm. Part of the 62 bearing series, featuring BECO's BHTS high temperature execution, ZZ metal shields on both sides and increased C4 radial internal clearance. Designed for rotating shaft applications where thermal operating conditions and bearing clearance are important. Verify lubrication, speed and temperature requirements before selection. Available through the specialized B2B platform simmering.pl, with stock in Poland and worldwide shipping.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
BECO |
|
Complete designation |
6201 BHTS ZZ C4 |
|
Bearing type |
Single row deep groove ball bearing |
|
Bearing series |
62 |
|
Bore diameter d |
12 mm |
|
Outside diameter D |
32 mm |
|
Width B |
10 mm |
|
Dimensions d x D x B |
12x32x10 mm |
|
Construction |
Single row, deep groove raceways |
|
Shields |
ZZ, metal shields on both sides |
|
Radial internal clearance |
C4, increased clearance |
|
Special execution |
BHTS, high temperature design |
The complete designation identifies the bearing type, dimensional series and special construction features.
6201 - Single row deep groove ball bearing from the 62 series, with a nominal bore diameter of 12 mm.
BHTS - BECO designation for its high temperature bearing series.
ZZ - Metal shields fitted on both sides of the bearing.
C4 - Increased radial internal clearance, greater than normal CN clearance and C3 clearance.
C4 clearance allows for changes in operating clearance caused by shaft and housing fits, temperature differences and thermal expansion.
The C4 suffix does not specify the maximum operating temperature or lubricant type.
BECO 6201 BHTS ZZ C4 consists of an inner ring, an outer ring, steel balls and a cage that maintains the correct spacing between the rolling elements.
Its deep groove raceway geometry enables the bearing to accommodate primarily radial loads, together with axial loads in both directions within the permissible operating limits.
Metal shields on both sides help restrict the entry of larger contaminants and retain lubricant within the bearing.
Unlike contact-type elastomer seals, metal shields normally operate without continuous rubbing contact against the inner ring. This reduces the friction associated with contact seals.
The BHTS execution is intended for applications requiring resistance to elevated temperatures, while C4 clearance provides an additional construction characteristic relevant to thermal expansion and operating fits.
Common written variations include:
BECO 6201 BHTS ZZ C4
6201 BHTS ZZ C4 BECO
BECO 6201BHTSZZC4
6201BHTSZZC4
6201 BHTS ZZ C4
These are alternative written forms of the same product designation, not independently verified OEM references or replacement part numbers.
|
Feature |
BECO 6201 BHTS ZZ C4 |
Standard 6201 |
6201 ZZ/C3 |
|---|---|---|---|
|
Dimensions |
12x32x10 mm |
12x32x10 mm |
12x32x10 mm |
|
Bearing type |
Deep groove ball bearing |
Deep groove ball bearing |
Deep groove ball bearing |
|
Execution |
High temperature |
Standard |
Manufacturer-dependent |
|
Shields |
Metal ZZ |
Depends on version |
Metal shields |
|
Radial internal clearance |
C4 |
Depends on version |
C3 |
|
Operating temperature |
According to BECO specification |
According to manufacturer |
According to manufacturer |
|
Lubrication |
According to BECO specification |
Depends on version |
Depends on version |
Although these bearings share the same nominal dimensions, they are not automatically interchangeable.
Differences in internal clearance, thermal stabilization, lubrication and shielding may significantly affect bearing performance.
Before purchasing BECO 6201 BHTS ZZ C4, verify the complete designation and the application's technical requirements.
Important selection criteria include:
Exact dimensions of 12x32x10 mm.
C4 radial internal clearance.
ZZ metal shields on both sides.
Required operating temperature.
Lubricant type and thermal suitability.
Shaft and housing fits.
Rotational speed.
Radial and axial loads.
Exposure to dust and other contaminants.
A bearing with CN or C3 clearance should not automatically replace the C4 version solely because the principal dimensions are identical.
The complete BHTS ZZ C4 designation must be considered when selecting an equivalent bearing.
High temperature deep groove ball bearings are used to support rotating shafts in equipment where conventional bearing executions may not meet thermal operating requirements.
Typical applications for this bearing category include:
Rotating mechanisms operating at elevated temperatures.
Conveyor assemblies in thermal processing installations.
Industrial machinery requiring increased radial internal clearance.
Bearing arrangements with limited access to internal lubrication.
These are typical applications based on the bearing's construction and intended category, not confirmed OEM applications for the exact BECO 6201 BHTS ZZ C4 part number.
Before installation, inspect the shaft, housing and bearing seating surfaces for cleanliness, wear and dimensional accuracy.
Use suitable mounting tools to apply force evenly to the ring being installed with an interference fit.
Do not transmit mounting forces through the balls or raceways.
The ZZ metal shields should remain undamaged and should not be removed unless specifically permitted by the manufacturer.
For high temperature operation, follow BECO's requirements concerning lubrication, operating temperature and rotational speed.
Store the bearing in its original packaging in a clean, dry environment until installation.
What are the dimensions of BECO 6201 BHTS ZZ C4?
The bearing has a 12 mm bore diameter, 32 mm outside diameter and 10 mm width. Its dimensions are 12x32x10 mm.
What does BHTS mean in the bearing designation?
BHTS identifies BECO's high temperature bearing series, intended for applications requiring special thermal operating characteristics.
What does ZZ mean?
ZZ indicates metal shields on both sides of the bearing. These shields help restrict contamination and retain lubricant.
What does C4 radial internal clearance mean?
C4 specifies increased radial internal clearance, greater than CN and C3. It affects the bearing's operating clearance after installation and during thermal expansion.
Are BECO 6201 BHTS ZZ C4 and 6201 ZZ/C3 interchangeable?
Not automatically. They share the same nominal dimensions but differ in radial internal clearance and may also differ in thermal execution and lubrication.
Does the bearing have rubber contact seals?
No. The ZZ designation indicates metal shields rather than contact-type elastomer seals.
What is the maximum operating temperature?
This is a high temperature bearing execution. However, the exact maximum operating temperature for BECO 6201 BHTS ZZ C4 must be confirmed using the manufacturer's documentation for this specific variant. The C4 suffix does not define that temperature.
Is the bearing factory lubricated?
The ZZ design is intended to protect the bearing's internal lubrication. However, the exact lubricant type, initial lubrication condition and maintenance requirements must be confirmed for this specific BECO execution.
BECO 6201 BHTS ZZ C4 is a single row deep groove ball bearing with dimensions of 12x32x10 mm. It belongs to BECO's high temperature BHTS series and features metal shields on both sides and increased C4 radial internal clearance. The bearing is intended for rotating shaft applications requiring appropriate thermal performance and controlled operating clearance.
BECO 6201 BHTS ZZ C4 can be ordered through the specialized B2B trading platform simmering.pl, with stock in Poland and worldwide shipping.
Data sheet