ZEN 686-2RS 6x13x5 mm is a miniature single-row deep groove ball bearing with contact seals on both sides. The rings and balls are manufactured from AISI 52100 (100Cr6) bearing steel. Basic dynamic load rating C: 1,082 N; static load rating C0: 442 N. Standard radial internal clearance range: 0.002-0.013 mm. Catalogue weight: less than 4 g. The sealed 2RS version is 5 mm wide, compared with 3.5 mm for the standard open 686. Designed for compact rotating assemblies. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
ZEN |
|
Full designation |
686-2RS |
|
Alternative designation |
686 2RS |
|
Bearing type |
Single-row deep groove ball bearing |
|
Series |
68 - miniature, thin-section |
|
Bore diameter (d) |
6 mm |
|
Outside diameter (D) |
13 mm |
|
Width (B) |
5 mm |
|
Sealing |
2RS - contact seals on both sides |
|
Rolling elements |
Balls |
|
Number of rows |
1 |
|
Bore configuration |
Cylindrical |
|
Flange |
None |
|
Ring and ball material |
AISI 52100 (100Cr6) bearing steel |
|
Cage |
W or J, depending on configuration |
|
Radial internal clearance |
0.002-0.013 mm, standard catalogue range |
|
Basic dynamic load rating (C) |
1,082 N (1.082 kN) |
|
Basic static load rating (C0) |
442 N (0.442 kN) |
|
Weight |
Less than 4 g |
|
Load directions |
Radial and limited axial loads in both directions |
|
Limiting speed for 2RS |
Requires confirmation for the sealed version |
ZEN 686-2RS is a miniature single-row deep groove ball bearing measuring 6x13x5 mm. It belongs to the thin-section 68 series and features contact seals on both sides. Manufactured from AISI 52100 bearing steel, it has a basic dynamic load rating of 1,082 N and a basic static load rating of 442 N. Its compact construction is suitable for small rotating assemblies requiring limited installation space and protection against contamination.
The designation 686 identifies a miniature deep groove ball bearing with a nominal bore diameter of 6 mm.
The dimensions of the sealed version are:
Bore diameter: 6 mm.
Outside diameter: 13 mm.
Width: 5 mm.
The difference between the outside and bore diameters is 7 mm, corresponding to a nominal radial cross-section of 3.5 mm.
This small cross-section limits the space available for the raceways, balls and cage.
The principal advantage is compact installation geometry rather than exceptionally high load capacity.
The suffix 2RS identifies contact seals fitted on both sides of the bearing.
Their main functions are to:
Restrict the entry of dust and fine contaminants.
Help retain grease inside the bearing.
Protect the rolling elements during operation under suitable environmental conditions.
Unlike non-contact metal shields, contact seals introduce additional frictional resistance.
This is particularly important in miniature mechanisms, where the available driving torque may be very low.
The ZEN 686-2RS incorporates one row of balls running between the raceways of the inner and outer rings.
Its primary function is to support radial loads.
The bearing can also accommodate limited axial loads in both directions.
Permissible axial loading depends on the radial load, internal bearing geometry and lubrication conditions.
The nominal radial cross-section of 3.5 mm enables the bearing to fit into compact mechanical assemblies.
However, the reduced cross-section also limits the space available for rolling elements and raceways.
Miniature bearings can be particularly sensitive to excessive loads, incorrect fits and installation errors.
A small bearing cross-section should not be confused with increased load capacity.
The 2RS seals help protect the grease from contamination, but they also increase frictional torque.
For applications with very low driving torque, the required contamination protection should be evaluated against the additional resistance generated by the seals.
The basic dynamic load rating is used to calculate the nominal fatigue life of a rolling bearing.
For ZEN 686-2RS, the catalogue value is 1,082 N.
This is not an unrestricted maximum permissible operating load.
Actual bearing life depends on the equivalent dynamic load, rotational speed, lubrication conditions and contamination.
The basic static load rating is 442 N.
This parameter is particularly relevant for bearings operating at low speeds, under stationary loads or with occasional short-duration overloads.
Excessive static loading can cause permanent deformation at the contact points between the balls and raceways.
The standard catalogue radial internal clearance range is 0.002-0.013 mm.
The appropriate clearance depends on the shaft and housing fits, operating temperature and installation conditions.
A bearing with increased C3 clearance should not automatically be considered interchangeable with a standard-clearance version.
The ZEN catalogue provides the following speed values for the corresponding open and metal-shielded configurations:
|
Catalogue configuration |
Speed |
|---|---|
|
Open or 2Z version, grease lubrication |
40,000 rpm |
|
Open or 2Z version, oil lubrication |
50,000 rpm |
These values must not automatically be applied to the sealed 686-2RS version.
Contact seals produce additional friction and heat compared with open bearings and bearings fitted with non-contact metal shields.
The permissible operating speed of the 2RS version must therefore be assessed separately.
|
Variant |
Construction |
Selection considerations |
|---|---|---|
|
686 |
Open bearing |
No integrated seals |
|
686-ZZ / 686-2Z |
Metal shields on both sides |
Generally lower sealing friction than 2RS |
|
686-2RS |
Contact seals on both sides |
Improved grease retention and contamination protection |
|
686-C3 |
Increased radial internal clearance |
Requires separate assessment of fits and operating conditions |
|
F686 |
Flanged outer ring |
Different outer-ring geometry |
Open, shielded and sealed versions may have different widths.
It must not be assumed that every 686-series bearing measures 6x13x5 mm.
Both versions have nominal dimensions of 6x13x5 mm.
The principal difference is their sealing arrangement.
The 686-2RS incorporates contact seals, while the 686-2Z uses metal shields.
The 2Z version generally offers lower frictional resistance, whereas the 2RS configuration provides improved grease retention and protection against fine contaminants.
The correct selection depends on operating speed, available driving torque and environmental conditions.
The standard open 686 bearing has dimensions of 6x13x3.5 mm.
The sealed 686-2RS version measures 6x13x5 mm.
This 1.5 mm width difference is important when selecting a replacement.
The ZEN range also includes a special open 686W5 version with a width of 5 mm.
An open 686 must not automatically be considered dimensionally interchangeable with a 686-2RS.
The C3 designation identifies increased radial internal clearance.
Increased clearance may be required for certain interference fits, operating temperatures or other specific conditions.
However, C3 is not universally preferable to standard clearance.
The complete bearing specification must be verified before substitution.
Both bearings have a nominal bore diameter of 6 mm, but their outside diameters differ.
|
Parameter |
686-2RS |
696-2RS |
|---|---|---|
|
Bore diameter |
6 mm |
6 mm |
|
Outside diameter |
13 mm |
15 mm |
|
Width |
5 mm |
5 mm |
|
Construction |
Single-row |
Single-row |
|
Sealing |
2RS |
2RS |
|
Radial cross-section |
3.5 mm |
4.5 mm |
The 696-2RS has a larger outside diameter and radial cross-section.
This may allow different internal geometry and rolling element dimensions.
However, actual differences in load capacity must be established from the catalogue data of the specific manufacturers.
The 686-2RS and 696-2RS are not directly interchangeable because they require different housing bore diameters.
The standard ZEN 686-2RS uses AISI 52100 bearing steel, also known as 100Cr6.
This material is widely used for bearing rings and rolling elements because it provides high hardness and resistance to rolling contact fatigue after appropriate heat treatment.
However, conventional bearing steel is not stainless steel.
Where corrosion resistance is required, a suitable stainless steel bearing configuration should be evaluated.
The stainless steel version is identified as S686-2RS.
Stainless steel and conventional bearing steel versions should not automatically be treated as equivalent in terms of load ratings and operating characteristics.
The following designation formats may be encountered:
ZEN 686-2RS
686-2RS ZEN
ZEN 686 2RS
686 2RS
686-2RS
These are alternative written forms of the same requested designation, not confirmed cross-manufacturer replacement numbers.
The compact construction of the ZEN 686-2RS makes this bearing type suitable for small rotating mechanisms with limited installation space.
Typical application categories include:
Miniature rotating assemblies.
Compact drive mechanisms.
Small guide rollers.
Precision mechanical equipment.
Small shaft assemblies with a 6 mm shaft diameter.
These applications are based on the bearing's dimensions and construction and are not verified OEM applications of this specific ZEN product.
Before selecting ZEN 686-2RS or an alternative bearing, verify:
Bore diameter of 6 mm.
Outside diameter of 13 mm.
Installation width of 5 mm.
Required radial and axial load capacity.
Contact sealing arrangement.
Radial internal clearance.
Rotational speed.
Operating temperature.
Lubrication requirements.
Shaft and housing fits.
Particular attention should be paid to the width.
The standard open 686 measures 6x13x3.5 mm, whereas the sealed 686-2RS measures 6x13x5 mm.
Matching bore and outside diameters alone does not guarantee interchangeability.
Before installation, inspect the shaft, housing bore and seals.
Mounting surfaces must be clean and free from burrs.
Because of the small bearing dimensions, even minor ring deformation can increase rotational resistance and reduce service life.
When mounting the bearing onto a shaft, apply installation force to the inner ring.
When pressing the bearing into a housing, apply force to the outer ring.
Installation forces must not be transmitted through the balls or seals.
Avoid pressing directly against the seals or using sharp tools near their edges.
Damage to the sealing elements can lead to grease leakage and contamination of the rolling contacts.
The 686-2RS is supplied with grease lubrication.
The seals should not be removed or additional grease introduced without an appropriate technical maintenance procedure.
For demanding operating conditions, lubricant suitability should be confirmed against the manufacturer's specifications.
The bearing has a 6 mm bore diameter, a 13 mm outside diameter and a width of 5 mm.
The basic dynamic load rating is 1,082 N, and the basic static load rating is 442 N.
They have the same nominal dimensions of 6x13x5 mm but differ in sealing arrangement and frictional resistance. Interchangeability depends on the operating conditions.
The standard open 686 has a width of 3.5 mm. ZEN also offers a special 686W5 version with a width of 5 mm.
No. The standard version uses AISI 52100 bearing steel. The stainless steel alternative is designated S686-2RS.
C3 clearance must not be assumed. The standard catalogue clearance range is 0.002-0.013 mm. A different clearance requires a separate designation or manufacturer confirmation.
Not without changing the housing. The 696-2RS has a 15 mm outside diameter, compared with 13 mm for the 686-2RS.
The suffix 2RS identifies contact seals on both sides of the bearing. These help retain grease and restrict the entry of contaminants.
ZEN 686-2RS is a miniature single-row deep groove ball bearing measuring 6x13x5 mm. Manufactured from AISI 52100 bearing steel, it features contact seals on both sides. Its basic dynamic load rating is 1,082 N and static load rating is 442 N. Unlike the standard open 686, which is 3.5 mm wide, the sealed version is 5 mm wide.
Data sheet