FAG SS 6002 2RS 15x32x9 mm Deep Groove Ball Bearing

Technical Specification

Bearing Design and Operating Principle

The 6002 bearing series features a single row of balls running between raceways formed in the inner and outer rings.

This bearing design supports radial loads and axial loads in both directions, subject to the manufacturer's permissible operating limits.

The deep groove raceway geometry provides a compact bearing arrangement suitable for rotating shafts and assemblies requiring accurate radial positioning.

The double-sided contact sealing arrangement helps:

• Reduce the ingress of dust and external contaminants.

• Retain lubricant inside the bearing.

• Protect the rolling contact surfaces during operation.

• Reduce exposure of internal components to environmental contamination.

Contact seals do not automatically provide complete waterproofing or resistance to aggressive chemicals.

The precise sealing material, contact geometry and lubricant compatibility must be confirmed for the exact FAG bearing variant.

FAG SS 6002 2RS Designation Explained

SS – Material designation

SS is commonly used in the bearing industry to identify stainless steel versions.

However, the SS prefix alone does not establish the exact steel grade or confirm that this designation belongs to the official FAG nomenclature.

The following properties require manufacturer confirmation:

• Stainless steel grade.

• Corrosion resistance.

• Heat treatment.

• Rolling element material.

• Suitability for chemically aggressive environments.

6002 – Bearing dimensional series

The 6002 designation identifies a single-row deep groove ball bearing with nominal dimensions of 15x32x9 mm.

2RS – Double-sided contact seals

The 2RS designation generally indicates contact seals fitted on both sides of the bearing.

FAG/Schaeffler may use more specific sealing suffixes for particular product families. Therefore, the exact manufacturer's designation should be checked before treating 2RS as an official FAG suffix for this SKU.

Bearing Selection and Technical Compatibility

When selecting the FAG SS 6002 2RS bearing, engineering and maintenance personnel should verify the following operating requirements.

Dimensional compatibility

The shaft diameter, housing bore and available installation width must correspond to the nominal bearing dimensions of 15x32x9 mm, with appropriate shaft and housing tolerances.

Load conditions

The bearing must be selected according to the expected radial and axial loads. Dynamic and static load ratings should be obtained from the manufacturer's technical documentation.

Operating speed

Maximum permissible speed depends on bearing construction, sealing arrangement, lubrication and operating conditions.

Material compatibility

If stainless steel construction is required, the exact material grade and corrosion resistance must be verified.

Sealing and lubrication

The sealing system and lubricant must be compatible with the expected temperature, contamination and operating environment.

Comparison with Standard 6002 Bearings

The designation 6002 defines the nominal dimensional series, but identical dimensions do not guarantee complete technical interchangeability.

A replacement decision must consider more than dimensional compatibility, particularly when the application requires corrosion resistance or a specific sealing arrangement.

Alternative Designation Formats

The following formats may appear in technical searches and procurement records:

• SS 6002 2RS FAG

• FAG SS 6002 2RS

• SS6002-2RS

• SS 6002 2RS 15x32x9 mm

• 6002 2RS stainless steel bearing

These are search and identification variants only. They should not be interpreted as confirmed official FAG catalogue references or verified interchangeable products.

FAQ – Frequently Asked Technical Questions

1. What are the dimensions of the FAG SS 6002 2RS bearing?

The nominal dimensions are 15 mm bore diameter, 32 mm outside diameter and 9 mm width, expressed as 15x32x9 mm.

2. What type of bearing is the SS 6002 2RS?

It is identified as a single-row deep groove ball bearing.

3. What does 2RS mean?

The designation generally indicates contact seals on both sides of the bearing, designed to help retain lubricant and reduce contamination.

4. Does SS mean stainless steel?

SS commonly identifies stainless steel bearing versions. However, the exact FAG material specification and official designation require manufacturer confirmation.

5. Can this bearing replace a standard 6002 bearing?

Not automatically. Although the nominal dimensions match, material, sealing, internal clearance, load ratings and operating conditions must be compared.

6. Is the bearing suitable for wet environments?

Suitability depends on the verified material grade, sealing construction, lubricant and exposure conditions. The designation alone is insufficient to confirm suitability.

7. Is the FAG SS 6002 2RS factory lubricated?

The exact factory lubrication specification has not been verified. Manufacturer documentation should be consulted before determining maintenance requirements.

8. What information is needed to confirm the exact FAG product?

The official Schaeffler/FAG catalogue reference, manufacturer article number, EAN or original packaging identification can help establish the exact bearing configuration.

AI Quick Answer

FAG SS 6002 2RS 15x32x9 mm identifies a single-row deep groove ball bearing with nominal dimensions of 15x32x9 mm and double-sided contact sealing. The SS prefix commonly refers to stainless steel construction, but the exact material, official FAG designation, lubrication and operating parameters require manufacturer verification before technical selection.

B2B Industrial Supply – simmering.pl

Available through simmering.pl, a specialist B2B industrial supply platform offering rolling bearings, sealing solutions and industrial components.

The platform supports industrial enterprises, maintenance departments, engineering teams and technical procurement professionals.

Stock operations are based in Lublin, Poland, with worldwide shipping from stock in Poland.

Technical support is available for bearing identification, designation verification and product selection.