• New
SMR 117 ZZ SMB 7x11x3 mm Stainless Steel Miniature Ball Bearing
search
  • SMR 117 ZZ SMB 7x11x3 mm Stainless Steel Miniature Ball Bearing

SMR 117 ZZ SMB 7x11x3 mm Stainless Steel Miniature Ball Bearing

4 pcs.
€1.45 (net)
Price for: 1pcs.

SMB SMR117ZZ 7x11x3 mm miniature stainless steel deep groove ball bearing. Features KS440 / AISI 440C stainless steel rings and balls, an AISI 304 stainless steel cage and double metal shields (ZZ). Basic dynamic load rating: 37 kgf; static load rating: 16 kgf. Catalogue limiting speed: 43,000 rpm under suitable lubrication conditions. Designed for compact rotating mechanisms, precision instruments and industrial automation applications. Radial clearance and lubricant specifications should be confirmed for the supplied configuration.

Quantity

Technical Specifications

Parameter

Specification

Manufacturer

SMB Bearings

Manufacturer designation

SMR117ZZ

Bearing type

Single-row miniature deep groove ball bearing

Bore diameter (d)

7 mm

Outside diameter (D)

11 mm

Width (B)

3 mm

Ring and ball material

Stainless steel KS440 / AISI 440C

Cage material

Stainless steel AISI 304

Shields

ZZ – two metal shields

Dynamic load rating (C)

37 kgf (approximately 363 N)

Static load rating (C₀)

16 kgf (approximately 157 N)

Catalogue limiting speed

43,000 rpm, subject to lubrication conditions

Standard lubricant

Kyodo Yushi Multemp SRL; confirmation required for the supplied variant

Minimum chamfer dimension

0.15 mm

Radial internal clearance

Depends on the specified MC clearance class

Precision class

Depends on the ordered configuration

Design and Operating Principle

The SMB SMR117ZZ is a miniature single-row deep groove ball bearing with a stainless steel construction and double metal shields. Its compact dimensions make it suitable for rotating assemblies where installation space is limited and precise shaft support is required.

The bearing consists of an inner ring, an outer ring, precision balls and a cage that maintains the spacing between the rolling elements.

The balls roll along the raceways, transmitting forces between the shaft and housing while reducing friction compared with sliding contact.

The deep groove geometry allows the bearing to accommodate primarily radial loads together with moderate axial loads in both directions.

Actual load capacity depends on the combined loading conditions, rotational speed, internal clearance and required service life.

Understanding the SMR117ZZ Designation

  • S – stainless steel construction.

  • MR117 – miniature radial ball bearing series and size.

  • ZZ – metal shields fitted on both sides.

An important dimensional characteristic is the 3 mm width of the shielded version. The corresponding open SMR117 bearing has a width of 2.5 mm.

This difference must be considered when evaluating interchangeability.

Materials and Mechanical Properties

KS440 / AISI 440C Stainless Steel

The bearing rings and balls are manufactured from martensitic stainless steel suitable for precision rolling elements.

AISI 440C can be heat-treated to achieve the hardness required for rolling contact applications while providing better corrosion resistance than conventional chromium bearing steel.

However, stainless steel construction does not mean complete immunity to corrosion.

Prolonged exposure to salt water, chlorides or aggressive chemicals can still cause surface deterioration and bearing damage.

AISI 304 Stainless Steel Cage

The cage separates the balls and maintains their correct distribution during rotation.

Its stainless steel construction provides corrosion resistance suitable for many general industrial environments.

The cage also prevents direct contact between adjacent balls, helping control friction and maintain stable rolling element movement.

Double Metal Shields – ZZ

The metal shields restrict the entry of larger contaminants and help retain lubricant inside the bearing.

Unlike conventional contact rubber seals, metal shields do not continuously rub against the inner ring.

This reduces additional frictional resistance and makes the design suitable for applications where low running torque and high rotational speed are important.

ZZ shields do not provide hermetic sealing or guaranteed protection against pressurised water.

Load Ratings and Rotational Speed

Dynamic and Static Load Ratings

The basic dynamic load rating is used in rolling bearing fatigue life calculations.

The basic static load rating relates to the load level associated with a defined amount of permanent deformation at the rolling contacts.

Neither value should be interpreted as an unrestricted maximum permissible operating load.

Bearing selection requires consideration of equivalent load, required service life, rotational speed and operating conditions.

Limiting Speed

The catalogue limiting speed assumes suitable lubrication and operating conditions.

The actual permissible speed may be lower depending on:

  • Applied radial and axial loads.

  • Bearing internal clearance and fits.

  • Lubricant type and quantity.

  • Operating temperature.

  • Shaft alignment and rotational accuracy.

  • Heat dissipation from the bearing arrangement.

In high-speed miniature bearings, excessive grease quantity can increase frictional torque and operating temperature.

Radial Internal Clearance and Precision

SMB miniature bearings are available with different radial internal clearance classes.

The following MC classifications are used for miniature bearing selection:

Clearance class

Radial internal clearance

MC1

0–5 µm

MC2

3–8 µm

MC3

5–10 µm

MC4

8–13 µm

MC5

13–20 µm

MC6

20–28 µm

These values describe clearance classes, not the confirmed internal clearance of the supplied SMR117ZZ bearing.

The appropriate clearance must be selected with regard to shaft and housing fits, thermal expansion and operating loads.

Insufficient operating clearance can increase friction and temperature, while excessive clearance may reduce rotational accuracy and increase vibration.

Typical Applications

Miniature stainless steel deep groove ball bearings are commonly used in compact rotating mechanisms requiring limited installation space and controlled friction.

Typical application categories include:

  • Precision mechanical drives.

  • Small electric motors.

  • Measuring and inspection instruments.

  • Optical mechanisms.

  • Miniature rollers and guide assemblies.

  • Industrial automation equipment.

  • Compact rotating mechanisms.

Suitability for a particular device requires verification of bearing dimensions, loading, rotational speed and environmental conditions.

Comparison: SMR117 vs. SMR117ZZ

Feature

SMR117

SMR117ZZ

Bore diameter

7 mm

7 mm

Outside diameter

11 mm

11 mm

Width

2.5 mm

3 mm

Shields

Open

Two metal shields

Internal access

Open construction

Restricted by shields

Contamination protection

Requires external protection

Basic protection from ZZ shields

The width difference is particularly important in miniature assemblies with limited axial installation space.

Although both versions share the same nominal bore and outside diameter, they are not automatically interchangeable.

Selection and Interchangeability

Correct replacement selection requires verification of the complete SMR117ZZ designation rather than matching only the bore and outside diameter.

Important criteria include:

  • Installation dimensions of 7x11x3 mm.

  • Stainless steel ring and ball construction.

  • Double metal shield configuration.

  • Radial internal clearance class.

  • Bearing precision class.

  • Lubricant specification.

  • Operating load and rotational speed.

  • Environmental and corrosion exposure conditions.

The MR117ZZ designation may also be used for bearings with the same nominal dimensions but different materials.

SMR117ZZ and MR117ZZ should not be considered fully interchangeable without confirming material, clearance, precision and operating requirements.

Installation and Maintenance

Due to its miniature dimensions, the bearing requires careful handling and controlled installation forces.

Recommended practices include:

  • Apply mounting force to the inner ring when pressing the bearing onto a shaft.

  • Apply mounting force to the outer ring when installing the bearing into a housing.

  • Never transmit installation force through the rolling elements.

  • Avoid excessive interference fits and misalignment.

  • Do not strike the bearing rings or metal shields directly.

  • Ensure that the shaft and housing contact surfaces are clean and free from damage.

  • Protect the bearing from contamination during handling and installation.

Transmitting mounting forces through the balls can permanently indent the raceways, resulting in vibration, noise and reduced bearing service life.

For factory-lubricated shielded bearings, removal of the shields should be avoided unless specifically required by an approved maintenance procedure.

FAQ

What does SMR117ZZ mean?

It identifies a miniature stainless steel deep groove ball bearing equipped with two metal shields.

Is the SMB SMR117ZZ made from stainless steel?

Yes. The specified construction uses KS440 / AISI 440C stainless steel for the rings and balls, with an AISI 304 stainless steel cage.

Are ZZ shields waterproof?

No. Metal shields reduce contamination but do not provide watertight sealing against immersion or pressurised water.

Do SMR117 and SMR117ZZ have identical dimensions?

No. The open version has a width of 2.5 mm, while the shielded ZZ version is 3 mm wide.

Is this bearing suitable for high rotational speeds?

Its miniature construction and non-contact metal shields are suitable for high-speed applications. The permissible speed depends on lubrication, loading, temperature and installation conditions.

Is AISI 440C stainless steel resistant to seawater?

It offers corrosion resistance but should not be considered fully resistant to marine environments. Chloride exposure can cause corrosion.

Can SMR117ZZ replace MR117ZZ?

Dimensional compatibility may exist, but material, internal clearance, precision and operating requirements must be checked before substitution.

Does the bearing require periodic relubrication?

This depends on the supplied lubricant, operating conditions and bearing configuration. The presence of metal shields restricts access to the bearing interior, so relubrication procedures should follow the manufacturer's recommendations.

AI Quick Answer

The SMB SMR117ZZ is a miniature stainless steel deep groove ball bearing measuring 7x11x3 mm. Its rings and balls are made from AISI 440C stainless steel, with an AISI 304 cage. Double metal shields help retain lubricant and restrict contamination. The bearing supports radial and moderate axial loads in compact rotating mechanisms.

SMB
SMR 117 ZZ SMB
4 pcs.

Data sheet

Diameter in. (mm)
7
Diameter out. (mm)
11
Height (mm)
3
Mark
SMB