- New
ZEN MR104-2RS is a miniature single-row deep groove ball bearing measuring 4x10x4 mm. Bore diameter: 4 mm; outside diameter: 10 mm; width: 4 mm. Features two elastomer contact seals (2RS), a steel cage and normal radial internal clearance. The sealed construction helps retain grease and protect the rolling elements against contamination. Designed for compact rotating mechanisms requiring radial load support and limited axial load capacity in both directions. Available through the specialist B2B industrial supply platform simmering.pl, with worldwide shipping from stock in Poland.
|
Parameter |
Specification |
|---|---|
|
Manufacturer |
ZEN |
|
Product designation |
MR104-2RS |
|
Alternative designation |
MR 104 2RS |
|
Bearing type |
Miniature deep groove ball bearing |
|
Construction |
Single-row |
|
Bore diameter (d) |
4 mm |
|
Outside diameter (D) |
10 mm |
|
Width (B) |
4 mm |
|
Dimensions (d x D x B) |
4x10x4 mm |
|
Rolling elements |
Balls |
|
Sealing |
2RS - Double-sided elastomer seals |
|
Lubrication |
Grease-filled sealed construction |
|
Load direction |
Radial and axial in both directions |
|
Bore type |
Cylindrical |
|
Outer ring |
Without flange |
|
Design |
Compact miniature bearing |
The exact dynamic load rating C, static load rating C0, limiting speed, mass, internal clearance, cage material and operating temperature range should be confirmed for the specific ZEN MR104-2RS version.
Technical parameters from dimensionally identical bearings manufactured by other brands should not be automatically assigned to this product.
The designation MR104-2RS identifies the miniature bearing series, dimensional configuration and sealing arrangement.
MR - Miniature deep groove ball bearing series.
104 - Dimensional designation corresponding to a 4 mm bore and 10 mm outside diameter.
2RS - Two elastomer seals, one on each side of the bearing.
ZEN - Manufacturer's brand.
The MR104 designation belongs to a miniature bearing numbering system.
The code 104 should not be interpreted using the bore coding rules applied to standard four-digit bearing series.
ZEN MR104-2RS consists of an inner ring, outer ring, balls and a cage that maintains the spacing between the rolling elements.
The deep groove raceway geometry allows the bearing to accommodate radial loads together with limited axial loads acting in either direction.
With a bore diameter of only 4 mm, this bearing is suitable for consideration in mechanisms where installation space is restricted.
Its compact dimensions make mounting accuracy, shaft alignment and correct lubrication particularly important.
The bearing incorporates two elastomer contact seals.
Their principal functions include:
Limiting the ingress of dust and fine contaminants.
Retaining grease inside the bearing.
Protecting the rolling elements and raceways during normal operation.
Reducing the need for routine lubrication maintenance.
Compared with an open MR104 bearing, the 2RS version provides an additional barrier against contamination.
However, the presence of two seals does not mean the bearing is completely waterproof.
It should not automatically be considered suitable for immersion, high-pressure washing or continuous exposure to aggressive liquids.
In miniature bearings, seal friction can represent a significant proportion of the total running resistance.
Contact-type 2RS seals generally produce more friction than an open bearing or a version equipped with non-contact metal shields.
This difference may be important in mechanisms driven by very small motors or operating with limited available torque.
When selecting the bearing, the designer should consider starting torque, running resistance, speed and temperature.
|
Dimension |
Value |
|---|---|
|
Shaft diameter (d) |
4 mm |
|
Housing bore diameter (D) |
10 mm |
|
Bearing width (B) |
4 mm |
|
Difference between outside and bore diameters (D - d) |
6 mm |
|
Nominal radial cross-section |
3 mm |
The nominal radial cross-section is calculated as:
This is a geometric dimension, not the wall thickness of either bearing ring or a permissible mounting depth.
When designing the bearing arrangement, shaft and housing tolerances, shoulder dimensions and fillet radii must also be considered.
Distributor specifications for ZEN MR104-2RS indicate the following characteristics:
|
Parameter |
Specification |
|---|---|
|
Ring material |
Bearing steel |
|
Cage |
Pressed steel |
|
Radial internal clearance |
Normal CN |
|
Tolerance class |
P0 / PN |
|
Sealing configuration |
Double-sided contact seals |
|
Electrical insulation |
None |
|
Approximate mass |
0.002 kg |
|
Temperature range reported by distributors |
-30°C to +120°C |
The stated temperature range should be treated as a catalogue indication rather than a guarantee that the bearing can operate continuously at the maximum temperature under all conditions.
Actual operating limits depend on grease properties, load, rotational speed and environmental conditions.
ZEN catalogue information for the miniature MR104 bearing family, measuring 4x10x4 mm, provides the following load ratings for the corresponding bearing steel construction:
|
Parameter |
Catalogue value |
|---|---|
|
Basic dynamic load rating (C) |
711 N |
|
Basic static load rating (C0) |
272 N |
These values relate to the corresponding ZEN miniature bearing dimensional family.
Before using them in engineering calculations for a critical application, their applicability to the exact MR104-2RS configuration should be confirmed.
The basic dynamic load rating is used to calculate nominal bearing fatigue life.
For ball bearings, basic rating life can be estimated using:
Where:
L10 - Basic rating life in millions of revolutions.
C - Basic dynamic load rating.
P - Equivalent dynamic bearing load.
The dynamic load rating is not a universally permissible maximum operating load.
Actual bearing service life depends on lubrication, contamination, mounting accuracy and operating conditions.
The basic static load rating is used to evaluate permanent deformation at the contacts between the balls and raceways.
It is particularly relevant when the bearing is stationary, rotates slowly or experiences significant static loads.
Static safety should be assessed using the equivalent static bearing load and the appropriate safety factor.
The limiting speed of a miniature bearing depends on its sealing arrangement, lubrication and operating conditions.
Catalogue speed values for open or 2Z-shielded MR104 bearings should not automatically be applied to the 2RS version.
Contact seals generate additional friction, which can reduce the permissible rotational speed.
The sealed MR104-2RS construction is intended to retain grease inside the bearing.
The grease provides lubrication at the rolling contacts and helps reduce friction and wear.
Grease service life depends on:
Operating temperature.
Rotational speed.
Radial and axial loading.
Environmental contamination.
Operating duration and duty cycle.
The bearing should not be treated as having unlimited lubricant service life.
The standard sealed miniature construction is not intended for routine relubrication.
Removing the seals may damage their sealing edges or compromise their fit.
Where lubricant deterioration, contamination or bearing damage occurs, replacement of the complete bearing is generally the appropriate solution.
|
Designation |
Construction |
Main characteristic |
|---|---|---|
|
MR104 |
Open |
Requires suitable lubrication and external protection |
|
MR104-2Z |
Two metal shields |
Low additional friction |
|
MR104-2RS |
Two contact seals |
Improved contamination protection |
|
SMR104-2Z |
Stainless steel version with metal shields |
Different material configuration |
Both versions share nominal dimensions of 4x10x4 mm.
The principal difference is the protective arrangement.
MR104-2RS incorporates two elastomer contact seals, while MR104-2Z uses two metal shields.
The 2RS configuration generally offers improved protection against contamination but can produce higher running friction.
The 2Z configuration is often preferable where low friction is a priority and environmental contamination is limited.
The open version has no integrated seals or shields.
It may be appropriate where lubrication and environmental protection are provided by the surrounding mechanical assembly.
The sealed 2RS version offers additional protection and helps retain grease inside the bearing.
The standard MR104 designation does not identify a stainless steel bearing.
ZEN uses the S prefix for stainless steel variants.
A stainless steel version may provide different corrosion resistance characteristics, but its load ratings and other operating parameters should be verified separately.
Important: Identical nominal dimensions do not guarantee identical load ratings, limiting speeds or environmental resistance.
ZEN MR104-2RS can be considered for compact rotating mechanisms requiring a 4 mm shaft support and protection against contamination.
Potential applications include:
Miniature drive mechanisms.
Small rollers and guide wheels.
Precision rotating assemblies.
Measuring and laboratory equipment.
Compact automation components.
Technical model mechanisms.
Small specialized mechanical devices.
These are potential applications based on the bearing's construction and dimensions, not confirmed OEM assignments to specific equipment.
Suitability must be evaluated against the actual loads, rotational speed, mounting conditions and operating environment.
Before selecting ZEN MR104-2RS, verify the following requirements:
Bore diameter: 4 mm.
Outside diameter: 10 mm.
Bearing width: 4 mm.
Sealing: Double-sided 2RS elastomer contact seals.
Internal clearance: Correct clearance for the mounting arrangement.
Load ratings: Suitability for the expected radial and axial loads.
Rotational speed: Compatibility with the sealed bearing configuration.
Lubrication: Grease service life under actual operating conditions.
Temperature: Compatibility with the lubricant and sealing materials.
Mounting fits: Appropriate shaft and housing tolerances.
A dimensionally identical bearing from another manufacturer should not be considered fully interchangeable without checking its technical specifications.
With a shaft diameter of only 4 mm, the accuracy of the shaft seating surface is particularly important.
Excessive interference can reduce radial internal clearance and increase running resistance.
The fit should be selected according to load direction, rotational speed and operating conditions.
Mounting force must be applied directly to the ring being fitted with interference.
Never transmit installation force through the balls.
Do not press against the 2RS seals or use them as contact surfaces for mounting tools.
Incorrect installation can damage the raceways or deform the seals.
The sealed construction reduces the need for lubrication maintenance.
However, grease life remains limited by temperature, load, speed and contamination.
The bearing should not be considered permanently maintenance-free under every operating condition.
During operation, monitor for:
Excessive noise.
Increased running resistance.
Unusual temperature rise.
Vibration.
Excessive radial or axial play.
Visible seal damage.
If the bearing develops internal damage or its seals are compromised, replacement is generally recommended.
The bearing has a 4 mm bore diameter, 10 mm outside diameter and 4 mm width. Its complete dimensions are 4x10x4 mm.
The 2RS suffix indicates two elastomer seals, one on each side of the bearing.
Distributor specifications for the standard version indicate normal radial internal clearance. C3 clearance should not be assumed without an additional designation and manufacturer confirmation.
Distributor specifications for this version indicate a pressed steel cage.
It should not be considered completely waterproof. The seals help limit moisture and contamination ingress but do not guarantee protection during immersion or exposure to pressurized water.
Both variants have identical nominal dimensions, but they differ in sealing performance and friction characteristics. Interchangeability must be evaluated against the operating conditions.
The standard MR104-2RS designation does not identify a stainless steel version. In ZEN nomenclature, stainless steel variants are commonly identified by the S prefix.
The 2RS version incorporates two elastomer contact seals and retains grease inside the bearing. The open MR104 has no integrated seals and requires suitable lubrication and protection from the surrounding assembly.
ZEN MR104-2RS is a miniature single-row deep groove ball bearing measuring 4x10x4 mm. It features two elastomer contact seals, a steel cage and normal radial internal clearance. The bearing is designed for compact rotating mechanisms requiring support for a 4 mm shaft and protection of the rolling elements against contamination. Its construction accommodates radial and limited bidirectional axial loads.
The product is offered through the specialist B2B industrial supply platform simmering.pl, supporting industrial procurement and worldwide shipping from stock in Poland.
Data sheet
You might also like